• Journal of Plant Biotechnology
• /
• v.37 no.4
• /
• pp.529-538
• /
• 2010

Proline accumulates in plants under environmental stresses including saline stress and alkaline stress. Here, we investigated the responses to two different stresses, saline stress (200 mM NaCl) and alkaline stress (100 mM $Na_2CO_3$) in two Leymus chinensis (Trin.) genotypes, LcWT07 and LcJS0107, and effects of exogenous proline on the activities of antioxidant enzymes. Both saline stress and alkaline stress significantly induced the accumulation of proline in leaves of the two genotypes after 96 h, and alkaline stress caused a transient and significant increase in LcJS0107 plants at 6 h. A reduction in the activities of catalase (CAT, EC 1.11.1.6) and ascorbate peroxidase (APX, EC 1.11.1.11), but not in the activity of superoxide dismutase (SOD, EC 1.15.1.1), was detected in plants exposed to saline and alkaline stresses. Remarkable decrease in relative water contents (RWC) was found in 144 h stressed plants. However, lipid peroxidation estimated by malonyldialdehyde (MDA) content in leaves remained relatively stable. With the addition of exogenous proline, it did not cause changes of proline levels in two genotypes, but combined with saline or alkaline stress, the exogenous application of proline significantly induced proline accumulation after even short treatment periods. Combined with salt stress, the exogenous application also increased the activities of CAT and APX. These results indicated that exogenous proline not only increases proline levels in vivo as a osmotic adjustment under stress, but mitigates the detrimental effects of saline and alkaline stresses by increasing the activities of antioxidant enzymes.

• The korean journal of orthodontics
• /
• v.24 no.1 s.44
• /
• pp.105-114
• /
• 1994

The movement of teeth during orthodontic treatment requires bone remodeling process of bone formation and bone resolution. To find out the changes occuring in the cell itself, mechanical stress was applied to the cell populations involved in the bone metabolism. Bone tissue cell populations were isolated from fetal rat calvaria and divided into OC and OB groups. Following results were obtained from measuring the changes in acid & alkaline phosphatease activity, cyclic AMP and $PGE_2$ production in time lapse after the application of mechanical stress. 1. In case of the marker enzyme of specific bone tissue cell, acid phosphatase activity was high in OC group and alkaline phosphatase activity was high in OB group. 2. After the mechanical stress was applied, acid phosphatase activity was decreased in both OC and OB groups and alkaline phosphatase activity was increase in OB group. 3. When the mechanical stress was applied for 15, 30 and 60 minutes, the production of $PGE_2$ increased in both OC and OB groups, as the time span increased. 4. When the mechanical stress was applied for 20 and 40 minutes, the production of $PGE_2$ increased in both OC and OB groups, as the time span increased.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.3
• /
• pp.210-216
• /
• 2021

Pollution of agricultural soil by alkaline salts, such as Na₂CO₃, is a critical and long-lasting problem in cultivable land. The aim of the study was to examine the putative role of citric acid (CA) in alleviating Na₂CO₃-stress in alfalfa. In this study, Na₂CO₃ significantly induced leaf chlorosis, inhibited plant growth and photosynthesis related parameters, increased hydrogen peroxide (H₂O₂) and reduced major antioxidant enzymes (SOD, CAD, APX) in alfalfa. However, the presence of CA these negative effects of Na₂CO₃-stress largely recovered. Interestingly, expression of antioxidant and ion transporter genes (Fe-SOD, CAT, APX, DHAR and NHX1) involved in Reactive oxygen species (ROS) homeostasis and oxidative stress tolerance in alfalfa. These findings suggest that CA-mediated Na₂CO₃ stress alleviation is an ecofriendly approach that would be useful to local farmer for alfalfa and other forage crop cultivation in alkaline soils.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.4
• /
• pp.43-48
• /
• 2011

Electroless nickel platings on carbon substrate were investigated for porous MCFC electrode applications. Acidic bath and alkaline bath were used in electroless nickel plating on carbon substrates. The rate of electroless plating in alkaline bath was faster than that in acidic bath. As pH was increased, the deposition rate was increased in both baths and the content of phosphorus in nickel deposit was decreased. The residual stresses of nickel deposit from acidic bath showed the compressive stress and on the other hand those from alkaline bath showed the high tensile stress. High tensile internal stress in nickel deposit caused the cracks over pH 11. Thiourea was added to both acidic and alkaline bath. The deposition rate of nickel was increased upto 0.5 ppm of thiourea and decreased. The maximum concentration of thiourea for the electroless nickel plating on carbon substrate was 1.5 ppm in both acidic and alkaline bath. Succinic acid was added to acidic bath. Addition of succinic acid up to 5 g/L increased the deposition rate of nickel and beyond which the deposition rate was decreased and maintained.

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.291-299
• /
• 1996

Orthodontic force is a mechanical stress controlling both of tooth movement and skeletal growth. The mechanical stress stimulate bone cells that may exert some influence on bone remodeling. The purpose of this study was to evaluate the difference in cellular activity depending on mechanical stresses such as compressive and tensile force by determining the alkaline phosphatase(ALP) activity. A clonal osteogenic cell line MC3T3-E1 was seeded into a 24-well plate($2{\times}10^4/well$). At the confluent phase, a continuous compressive hydrostatic pressure($25g/cm^2$, $300g/cm^2$) and continuous tensile hydrostatic pressure($-25g/cm^2$, $-300g/cm^2$) were applied for 4, 6, 10, 14, 18, 20 days respectively by a diaphgragm pump. At the end of the stimulation period, cell layers were prepared for ALP activity assay. The ALP activity of the compressive group increased more than that of the tensile group at same force magnitude, whereas the cells responded to a similar pattern regardless of the type of mechanical stress The ALP activity of the compressive and tensile group turned into the level of the control group as the length of time increased. These results indicated that a mechanical stress may be more effective on cellular activity during active cellular proliferation and differentiation periods. The time to achieve maximum ALP activity was delayed as the mechanical stress increased in both the compressive and the tensile group. Accordingly, the magnitude of the stress rather than the type of mechanical stress may have more influence on cellular activity.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.10
• /
• pp.1122-1126
• /
• 2009

The exogenously added cadaverine is effective in protecting Vibrio vulnificus from methyl viologen (MV)-induced superoxide stress at pH 8.5. Such a protective effect by cadaverine was not observed at pH 7.5. Consistently, the accumulated level of intracellular cadaverine at pH 8.5 is approximately four times as much as that of the control cell at pH 7.5. Cadaverine accumulation is not affected by MV. The protection of V. vulnificus by cadaverine from superoxide stress was abolished when cadB coding for the lysine-cadaverine antiporter was interrupted. However, the cadaverine-mediated protection was complemented with cadB DNA. Therefore, CadB of V. vulnificus not only acts as a lysine-cadaverine antiporter at acid pH to neutralize the external medium, but also mediates cadaverine uptake at alkaline pH to result in cell protection from superoxide stress.

• YAKHAK HOEJI
• /
• v.39 no.5
• /
• pp.548-553
• /
• 1995

Effects of restraint stress and its modulations by ursodeoxycholic acid(UDCA) were evaluated on some biochemical and biophysical parameters in rats. Restraint stress induced elevations in blood alkaline phosphatase (ALP). cholesterol (CHOL), aspartate transaminase (GOT), alanine transaminase (GPT), lactate dehydrogenase (LDH) levels. It was also caused adrenal hypertrophy, decrease in weight of spleen and contents of ascorbic acid in stressed rats. As a results, stress indicators such as spleen, ascorbic acid, GOT, GPT, LDH were fastly changed after imposing stress, but those such as ALP, CHOL, adrenal were induced relatively later. UDCA was tested if it has an inhibitory effect against 18-hr restraint induced stress. UDCA lowered ALP, CHOL, LDH level and also effectively elevated the ascorbic acid contents in 25 mg/kg dosage of UDCA. In organ weights. the restraint stress induced increases in spleen and adrenal were attenuated by UDCA in 50 mg/kg dosage. However. stress-induced GOT and GPT levels were unaffected by UDCA.

• Nuclear Engineering and Technology
• /
• v.45 no.1
• /
• pp.67-72
• /
• 2013

Stress corrosion cracking (SCC) behaviors of Alloy 690 were studied in lead-containing aqueous alkaline solutions using the slow strain rate tension (SSRT) tests in 0.1M and 2.5M NaOH with and without PbO at $315^{\circ}C$. The side and fracture surfaces of the alloy were then examined using scanning electron microscopy after the SSRT test. Microstructure and composition of the surface oxide layer were analyzed by using a field emission transmission electron microscopy, equipped with an energy dispersive X-ray spectroscopy. Even though Alloy 690 was almost immune to SCC in 0.1M NaOH solution, irrespective of PbO addition, the SCC resistance of Alloy 690 decreased in a 2.5M NaOH solution and further decreased by the addition of PbO. Based on thermodynamic stability and solubility of oxide, high Cr of 30wt% in the Alloy 690 is favorable to SCC in mild alkaline and acidic solutions whereas the SCC resistance of high Cr Alloy 690 is weakened drastically in the strong alkaline solution where the oxide is not stable any longer and solubility is too high to form a passive oxide locally.

• Membrane and Water Treatment
• /
• v.7 no.5
• /
• pp.417-431
• /
• 2016

Poly(vinylidene fluoride) (PVDF) powder was treated with aqueous sodium hydroxide to obtain partially defluorinated fluoropolymers with expected properties such as improving hydrophilicity and fouling resistance. Raman spectrum and FT-IR results confirmed the existence of conjugated carbon double bonds after alkaline treatment. As the concentration increased, the degree of defluorination increased. The morphology and structure of membranes were examined. The permeation performance was investigated. The results showed that membrane's hydrophilicity increased with increase of the percentage of alkaline treated PVDF powder. Moreover, in terms of the water contact angle, it decreased from $92^{\circ}$ to a minimum of $68^{\circ}$; while water up take increased from 128 to 138%. Fluxof pure water and the cleaning efficiency increased with the increase of alkaline treated PVDF powder. The fouling potential also decreased with the increase of the percentage of alkaline treated PVDF powder. The reason that makes blending PVDF show different characteristics because of partial defluorination, which led the formation of conjugated C = C bonds and the inclusion of oxygen functionalities. The polyene structure followed by hydroxide attack to yield hydroxyl and carbonyl groups. Therefore, the hydrophilicity of blending membrane was improved. The SEM and porosity measurements showed that no obvious variations of the pore dimensions and structures for blend membranes were observed. Mechanical tests suggest that the high content of the alkaline treated PVDF result in membranes with less tolerance of tensile stress and higher brittleness. TGA results exhibited that the blend of alkaline treated PVDF did not change membrane thermal stability.

• Corrosion Science and Technology
• /
• v.17 no.3
• /
• pp.116-122
• /
• 2018

The secondary coolant of a nuclear power plant has small amounts of various impurities (S, Pb, and Cl, etc.) introduced during the initial construction, maintenance, and normal operation. While the concentration of impurities in the feed water is very low, the flow of the cooling water is restricted, so impurities can accumulate on the Top of Tubesheet (TTS). This environment is chemically very complicated and has a very wide range of pH from acidic to alkaline. In this study, the characteristics of the oxide and the mechanism of stress corrosion cracking (SCC) are investigated for Alloy 690 TT in alkaline solution containing Pb, Cl, and S. Reverse U-bend (RUB) specimens were used to evaluate the SCC resistance. The test solution comprises 3m NaCl + 500ppm Pb + 0.31m $Na_2SO_4$ + 0.45m NaOH. Experimental results show that Alloy 690 TT of the crevice environment containing Pb, S, and Cl has significant cracks, indicating that Alloy 690 is vulnerable to stress corrosion cracking under this environment.