• BMB Reports
• /
• v.41 no.4
• /
• pp.305-309
• /
• 2008

Cobalt is an essential microelements in many biological processes involving enzymatic activity. We found that $Zn^{2+}$ and $Mg^{2+}$, which are in the active site of native calf intestine alkaline phosphatase (CIP), can be replaced by $Co^{2+}$ directly in solution. The effect of $Co^{2+}$ concentration on the substitution reaction was examined at ratios of [$Co^{2+}$]/[CIP] from 0:1 to 8:1. The quantity of $Zn^{2+}$ in CIP decreased progressively as the ratio was increased, but the amount of $Mg^{2+}$ changed in irrregular fashion. A series of active site models of the reaction mechanism of CIP are proposed. Low pH was found to promote the replacement of $Mg^{2+}$ by $Co^{2+}$. To understand how the substitution affects the enzyme, we also solved the secondary structure of CIP after reaction with $Co^{2+}$ in different conditions.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.119-129
• /
• 1992

The rates of mass transfer with the alkaline hydrolysis of ethyl acetate and n-butyl acetate were measured by using a modified Lewis cell. The rates of mass transfer with chemical reaction were independent of the speed of agitation, and the reaction enhancement factors were independent of the ionic strength. The second order reaction rate constants of ethyl acetate and n-butyl acetate could be obtained from an approximate solution of a diffusion equation by film theory, and their values were $0.041m^3/kg\;mol{\cdot}s$ and $0.338m^3/kgmol{\cdot}s$, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.3
• /
• pp.1-7
• /
• 1995

The crystal transformation from cellulose I to cellulose II during alkaline swelling of waste wood, which has been used for cultivating oak mushroom(Cortinellus edodes (Berk.) Ito et Imai), was investigated and compared to that of normal wood by a series of X-ray diffraction analysis. When the sapwood of cultivated wood was treated with 20% NaOH solution for 2 hours, the cellulose I can be easily transformed into Na-cellulose I than normal wood or heartwood of cultivated wood. Certainly the formation of Na-cellulose in wood is proportional to alkali swelling duration, and the formation of cultivated sapwood was faster than that of the other woods. Cellulose I in the sapwood of cultivated wood was easily transformed into cellulose II during mercerization, but the sapwood of normal wood and the heartwood of cultivated wood hardly converted to cellulose II. Namely, most of Na-cellulose I in normal wood can be reconverted to cellulose I in the process of washing and drying. Therefore, it can be concluded from this study that in cell wall lignin and hemicellulose can prevent the alkaline swelling of cellulose in wood and the transformation from cellulose I to cellulose II as well.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.2
• /
• pp.43-46
• /
• 2002

Commercial titanium rod was anodized in three types of electrolytes such as 0.06 mol/L $\beta-glycerophosphate+0.3mol/L$ calcium acetate, 0.06mol/L $\beta-glycerophosphate+0.3mol/L$ sodium acetate and 0.06 mol/L $\beta-glycerophosphate+5mol/L$ calcium phosphate. The titanium oxide layer $(TiO_2)$ was characterized by scanning electron microscope (SEM), X-ray diffraction (XRD) and electron spectroscopy chemical analysis (ESCA). Numerous micropores were observed on the titanium oxide layer by SEM. The diameter of micropores increased with the increase of electrolytic voltage. The titanium oxide layer was composed of anatase structure. The phosphorous element was detected at 130 eV binding energy, but calcium was not found in the oxide layer because of lower contents. After anodizing the oxide layer was etched in the 30g/L NaOH solution at $80^{\circ}C$ for 1hr. The surroundings of micropores were much more smoothed and rounded than before alkaline etching.

• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.427-437
• /
• 2013

Generation rate of construction wastes in Korea has occupied preponderantly in recent years. To understand chemical properties of recycled concrete aggregate (RCA), RCA samples were tested for their leaching characteristics. Leaching tests were conducted according to Korean Standard Leaching Test (KLT) and Toxicity Characteristics Leaching Procedure (TCLP) respectively. The RCA samples were characterized using X-ray fluorescence (XRF). Alkalinity of the leachate was determined using a pH meter titration method. The XRF analysis result shows that the calcium oxide (CaO) content in the RCA sample is 25.3~50.4 %. When the RCA sample was mixed with water in a batch reactor, pH in the solution was rapidly increased, and 70% of the total pH change was found in 1 hour. The TCLP showed slightly higher efficiency for leaching heavy metals than the KLT. The leaching efficiency was also higher as the particle size of RCA sample was smaller. The leaching test results suggest that RCA can be generally classified as nonhazardous waste.

• Journal of the Korean Chemical Society
• /
• v.15 no.2
• /
• pp.45-48
• /
• 1971

The various eluents have been used for the separations of alkaline earth metals by elutions through cation exchange resin column by many investigators. We find, the mixed solution of 1M HAc and 1M NaAc (pH 4.75) is the best eluent for this purpose, becouse the one step elution through 7cm Dowex 50w${\times}$8(100~200mesh) resin column with this eluent, gives the quantitative separation. When 2M NaAc is used as a eluent Sr(II) and Ba(II) is separated easily without any contamination of Mg(II) andCa(II). The Ca-Pb alloy which is composed of Cu, Ca, Sr, Ba and abundance of Pb metal is separated quantitatively into its components by the two step elution with 0.3M HAc + 0.3M NaAc(PH 4.75) and 0.5M HAc + 0.5M NaAc(PH 4.75) as eluents through 10cm resin column.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.6
• /
• pp.1341-1348
• /
• 2009

Electrocatalytic oxidation of two anti-inflammatory drugs (Mefenamic acid and Indomethacin) was investigated on a cobalt hydroxide modified glassy carbon (CHM-GC) electrode in alkaline solution. The process of oxidation and its kinetics were established by using cyclic voltammetry and chronoamperometry techniques as well as steady state polarization measurements. Voltammetric studies indicated that in the presence of under study drugs, the anodic peak current of low-valence cobalt species increased, followed by a decrease in the corresponding cathodic current. This result indicates that the drugs were oxidized via cobalt hydroxide species immobilized on the electrode surface via an E$\acute{C}$ mechanism. A mechanism based on the electrochemical generation of Co (IV) active sites and their subsequent consumption by the drugs in question was also investigated. The constants rate of the catalytic oxidation of the drugs and the electron-transfer coefficients reported.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.709-712
• /
• 2008

This study evaluated a mechanical performance of recycled polyethylene terephthalate(PET) fiber reinforced concrete on chemical environment. This study applied to three types of environmental condition including alkaline, salt, $CaCl_2$ in water solution and measured a reduction of mechanical performance of recycled PET fiber reinforced concrete for 30, 60, 90 days under chemical solutions. The mechanical performance of recycled PET fiber reinforced concrete evaluated to carried out a compressive strength test. As the result of test, it was found that the mechanical performance decreased as the exposure time to alkaline environment and indicated a excellence performance under salt, $CaCl_2$ environment conditions.

• Journal of Hydrogen and New Energy
• /
• v.29 no.5
• /
• pp.458-465
• /
• 2018

This study reports the fabrication of anion exchange membranes (AEMs) containing two kinds of functional groups: i) trimethylphosphite (TMP) and ii) trimethylamine (TMA). We carried out the synthesis of polymers to enhance thermal stability and ion conductivity. The alternative polymer was prepared using 2,2-bis(4-hydroxy-3-methylphenyl)propane and decafluorobiphenyl. The membrane was fabricated by solution casting method. The thermal stability of membranes was examined by TGA. The physiochemical properties of membranes were also investigated in terms of water uptake, swelling ratio, ion exchange capacity, and ion conductivity. The hydroxide ion conductivity of the membranes reached about 20.2 mS/cm for quaternary ammonium poly(arylene ether) (QA-PAE) containing TMA moiety and 5.1 mS/cm for quaternary phosphonium PAE (QP-PAE) containing TMP moiety at $90^{\circ}C$.

• Journal of Periodontal and Implant Science
• /
• v.38 no.3
• /
• pp.453-466
• /
• 2008

Purpose: The purpose of this research is to study about initial adhesion, proliferation and activation of osteoblast to titanium surface treated with machined, hydroxyapatite coating, resorbable blast material blasting and anodizing method. Material and Methods: After treating the titanium surface of each block with machined, impurities were removed and sterilized. The number of cells attached from cultured osteoblast of respective experimental groups were measured at 1, 4, 7, and 14day and alkaline phosphatase, calcium, and inorganic phosphate concentration of cultured solution was measured. Result: Anodizing group showed the highest rate of cell attachment and proliferation activity. RBM treated group showed the highest increasing on their alkaline phosphatase activity, on the calcium apposition, on inorganic phosphate apposition of 1 and 4 days in cultured osteoblast to compare with other groups. Conclusion: On the basis of these findings, we conclude that surface modification of titanium was profoundly effected on the attachment, proliferation and activation of osteoblast in initial stage osseointegration.