• The Korean Journal of Ecology
• /
• 제18권1호
• /
• pp.1-15
• /
• 1995

Alakline phosphatase activity (AP A) as a phosphorus deficiency measurement in flowing waters and of microhabitats (rocks, wood, leaves, and sediments) was measured and its relationship to flux of nutrients and response to rainfall events were determined for two geologically different streams in west Alabama from August to November. Results indicated water column AP A in both streams had a low correlation with levels of orthophosphate, total organic phosphorus, nitrate, ammonia, dissolved organic carbon, and discharge (r=0.075-0.583; n=g-IU. Communities on rock surfaces showed a higher AP A level than those on wood and leaves. Sediment passed through a $106{\mu}m$ sieve showed 2-9 times higher AP A level than material passed through $425{\mu}m$ sieve. The first storm after drought at Yellow Creek introduced substantial quantities of DOC (2.5 times baseflow concentrations) and $N0_3-N$ (5.8 times baseflow concentrations) which did not affect AP A significantly. The second storm at Little Schultz Creek caused minor changes in nutrient cocentrations; however $N0_3-N$ levels and AP A were drastically lower due to the dilution effect. Retention of stream water AP A at Yellow Creek and Little Schultz Creek on $0.45{\mu}m$ filter (54 and 43%, respectively) and $0.22{\mu}m$ (83 and 77% of total APA. respectively) indicated more free dissolved portion of the enzyme was present at Little Schultz Creek. Little Schultz Creek (with carbonate and with a higher productivity and biomass) showed a consistantly greater AP A activity $(132{\pm}54\;{\mu}M{\cdot}1^{-1}{\cdot}min^{-I};\;n=g)$ than Yellow Creek $(41{\pm}23\;{\mu}M{\cdot}1^{-I}{\cdot}min^{-I}$, with a sandstone substrate; n=l1, $p{\leq}O.OO1)$. Overall, a greater APA on all microhabitats and the presence of more dissolved enzyme in Little Schultz Creek during the study period may indicates it is more P deficient than Yellow Creek.

• 한국수소및신에너지학회논문집
• /
• 제27권6호
• /
• pp.677-684
• /
• 2016

Various commercially available gas diffusion layers (GDLs) from different manufacturers were used to prepare an air electrode using $La_{0.8}Sr_{0.2}CoO_3$ perovskite (LSCP) as the catalyst for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in an alkaline solution. Various GDLs have different physical properties, such as porosity, conductivity, hydrophobicity, etc. The ORR and OER of the resulting cathode were electrochemically evaluated in an alkaline solution. The electrochemical properties of the resulting cathodes were slightly different when compared to the physical properties of GDLs. Pore structure and conductivity of GDLs had a prominent effect and their hydrophobicities had a minor effect on the electrochemical performances of cathodes for ORR and OER.

• 자원리싸이클링
• /
• 제17권1호
• /
• pp.66-72
• /
• 2008

폐알칼리망간전지로부터 침출과 공침반응을 이용하여 Mn-Zn ferrite 분말을 제조하기 위한 기초실험을 수행하였다. 100g/L 광액 농도 3.0M $H_2SO_4$, $60^{\circ}C$ 및 교반속도 200 rpm의 조건에서 과산화수소 30ml를 첨가하여 얻어진 아연과 망간의 침출율은 각각 97.9%, 93.9% 이상이었으며, 침출용액을 가지고 반응시간, 반응온도, $O_2$ 가스량을 조절하며 공침반응을 진행하였다. 공침반응 결과 pH 12, $80^{\circ}C$, $O_2$ 1.3L/min, 교반속도 400 rpm의 조건에서 Mn-Zn ferrite를 저온 합성할 수 있었다. 합성된 Mn-Zn ferrite분말은 $0.143{\mu}m$의 구형 ferrite로서 80 emu/g의 포화자화값을 가지고 있었다.

• Computers and Concrete
• /
• 제24권5호
• /
• pp.453-458
• /
• 2019

Today, concrete remains the most important, durable, and reliable material that has been used in the construction sector, making it the most commonly used material after water. However, cement continues to exert many negative effects on the environment, including the production of carbon dioxide (CO2), which pollutes the atmosphere. Cement production is costly, and it also consumes energy and natural non- renewable resources, which are critical for sustainability. These factors represent the motivation for researchers to examine the various alternatives that can reduce the effects on the environment, natural resources, and energy consumption and enhance the mechanical properties of concrete. Geopolymer is one alternative that has been investigated; this can be produced using aluminosilicate materials such as low calcium (class F) FA, Ultra-Fine GGBS, and high calcium FA (class C, which are available worldwide as industrial, agricultural byproducts.). It has a high percentage of silica and alumina, which react with alkaline solution (activators). Aluminosilicate gel, which forms as a result of this reaction, is an effective binding material for the concrete. This paper presents an up-to-date review regarding the important engineering properties of geopolymer formed by FA and slag binders; the findings demonstrate that this type of geopolymer could be an adequate alternative to ordinary Portland cement (OPC). Due to the significant positive mechanical properties of slag-FA geopolymer cements and their positive effects on the environment, it represents a material that could potentially be used in the construction industry.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권6호
• /
• pp.845-854
• /
• 2016

Characteristics and properties of gelatin from goat skin pretreated with NaOH solutions (0.50 and 0.75 M) for various times (1 to 4 days) were investigated. All gelatins contained ${\alpha}$-chains as the predominant component, followed by ${\beta}$-chain. Gelling and melting temperatures of those gelatins were $23.02^{\circ}C$ to $24.16^{\circ}C$ and $33.07^{\circ}C$ to $34.51^{\circ}C$, respectively. Gel strength of gelatins increased as NaOH concentration and pretreatment time increased (p<0.05). Pretreatment for a longer time yielded gelatin with a decrease in $L^*$-value but an increase in $b^*$-value. Pretreatment of goat skin using 0.75 M NaOH for 2 days rendered the highest yield (15.95%, wet weight basis) as well as high gel strength (222.42 g), which was higher than bovine gelatin (199.15 g). Gelatin obtained had the imino acid content of 226 residues/1,000 residues and the gelatin gel had a fine and ordered structure. Therefore, goat skin gelatin could be used as a potential replacer of commercial gelatin.

• 한국수소및신에너지학회논문집
• /
• 제26권3호
• /
• pp.206-211
• /
• 2015

For the hydrogen production, Gas Lab and Gnc make alkaline watrer electrolyzer and found optimized condition of experimental parameters of cell material and operating procedures. For the commercial production, we saved electric power consumption and caloric based efficiency with over 70%. Used cell pressures are 10 bar, 30 bar and consumed electricity is $4,000A/m^2$, 4.19 kW ($T=100^{\circ}C$) at 10 bar. Another data is $2,000A/m^2$, 3.92 kW ($T=95^{\circ}C$) at 30 bar. Applied voltage is 1.75 V ($100^{\circ}C$, 10 bar), 1.64 V ($95^{\circ}C$, 10 bar), 1.81 V ($85^{\circ}C$, 30 bar), 1.76 V ($95^{\circ}C$, 30 bar). As cell temperature increase, applied voltage has been decreased and current has been increased. The concentration of KOH solution is 30 weight %.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3595-3600
• /
• 2014

Monitoring of pH, especially under highly alkaline conditions, is necessary in various processes in the industrial, biotechnological, agricultural, and environmental fields. However, few pH indicators that can function at highly alkaline levels are available, and most of which are organic-based pH indicators. Several years ago, it was reported that gold nanoparticles prepared using trisodium citrate dihydrate were rapidly aggregated at pH values higher than ~12.7. A shift of surface plasmon resonance for such aggregated gold nanoparticles can be applied to pH indicators, allowing for the substitution of traditional organic-based pH indicators. The most important characteristic of pH indicators is the transition pH range. Herein, gold and silver nanoparticles are prepared using different reducing agents, and their transition pH ranges are examined. The results showed that all nanoparticles prepared in this study exhibit similar transition pH ranges spanning 11.9-13.0, regardless of the nanoparticle material, reducing agents, and concentration.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.129-136
• /
• 2006

Although cleaner and cheaper deinking of ONP could be performed at the neutral or low alkaline condition excessive loss from froth-flotation is unavoidable and so reduction of alkali or caustic soda dosage sacrifices recycling yield. Now the new trade-off regarding alkali dosage versus flotation yield is urgently required in order to set the optimized neutral or low alkaline deinking process of ONP. Lipase from Thermomyces Lanuginosus has an effect on desizing and deacetylation reaction and it could be applied to the stock of pre flotation secondary stage in order to reduce the flotation reject without the sacrifice of optical properties of flotation accepts. Instead of inorganic base, lipase could be applied as a biochemical catalyst for the selective modification of valuable hydrophobic particles in deinking stock, for example cellulose fines and inorganic fillers covered by hydrophobic additives or contaminants. When the enzymatic hydrolysis of ester bond could be made on the surface of hydrophobic particulates, unwanted float of fine particles could be prevented. Now the enhancement of flotation selectivity or the modification of the hydrophobicity of deinking stock is expected to be promoted by the enzymatic pre treatment. And the reduction of recycling cost with the saves of raw material, recovered paper would be possible as a result.

• Journal of Yeungnam Medical Science
• /
• 제37권3호
• /
• pp.217-225
• /
• 2020

Background: This study was performed to provide a long-term bacterial seal through the formation of reparative dentin bridge, calcium silicate-based pulp capping materials have been used at sites of pulpal exposure. The aim of this study was to evaluate the mineralization-inducing potentials of calcium silicate-based pulp capping materials (ProRoot MTA [PR], Biodentine [BD], and TheraCal LC [TC]) in human dental pulp cells (HDPCs). Methods: Specimens of test materials were placed in deionized water for various incubation times to measure the pH variation and the concentration of calcium released. The morphology of HDPCs cultured on the specimens was examined using a confocal laser scanning microscope (CLSM). Alizarin red S staining and alkaline phosphatase assays were used to evaluate mineralization-inducing potentials of the capping materials. Results: BD showed the highest calcium release in all test periods, followed by PR and TC. (p<0.05). All experimental groups showed high alkalinity after 1 day, except at 14 days. BD showed the highest cell viability compared with PR and TC after 1 and 3 days, while TC showed the lowest value (p<0.05). The CLSM analysis showed that cells were well adhered and expressed actin filaments for all pulp capping materials. Mineralization by PR and BD groups was higher than that by TC group based on alizarin red S staining. BD showed significantly higher alkaline phosphatase activity than PR and TC, while TC showed the lowest value (p<0.05). Conclusion: Within the limitations of the in vitro study, BD had higher mineralization-inducing potential than PR and TC.

• Journal of the Korean Wood Science and Technology
• /
• 제25권1호
• /
• pp.23-27
• /
• 1997

Alkali-soluble extracts were prepared from barks of Japanese larch(Larix leptolepis). Siberian larch(Larix gmelineii) and Radiata pine(Pinus radiata) The effect of various factors, such as particle size, liquor ratio, extraction temperature, and reaction time, on the extracts yield was investigated. Particle sizes affected the alkali-soluble extracts; the finer the particle size, the higher extracts and extract efficiency. High temperature and high liquor ratio were more effective. In the range of 0.25% to 1% NaOH concentration, alkali extracts were increased with the increasing alkali concentration. However, extract yields were leveled off above 0.5% alkali concentration. Extractions with NaHCO3 were almost equivalent to those of NaOH extraction. 1% NaOH and 1% NaHCO3 resulted in the highest yields of alkaline extracts. Extracts from Japanese larch were lower than those from Siberian larch and Radiata pine barks. Siberian larch bark was the best raw material for tannin adhesives, because its extractive yield was higher than those of the other barks. Concerning pH of alkaline media during extraction, small increases of the extract yields were resulted at range of pH 7 to pH 9, while a large increases from pH 9.0 to pH 12. This phenomenon is attributed to higher alkalinity.