• Textile Coloration and Finishing
• /
• v.25 no.3
• /
• pp.215-222
• /
• 2013

The purpose of this study is to minimize fading fabrics of surgical gown by repeated severe laundering and sterilization condition. The study showed that the best conditions were reduction cleaning using sulphinic acid derivatives or glucose organic chemicals at $98^{\circ}C$ alkaline solutions. In these conditions, color difference values(dE) were below 1.0 that means unrecognizable color change by repeated laundering and sterilization. If it treated with only laundering, reduction cleaning conditions may adjust over $80^{\circ}C$ alkaline solution. In conclusion, it is needed to select the high-washing fastness dye and reduction cleaning using sulphinic acid derivatives or glucose organic chemicals at $98^{\circ}C$ alkaline solutions for removal unfixed dyes.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1145-1152
• /
• 2013

The rate constant of alkaline fading of methyl green ($ME^{2+}$) was measured in the presence of non ionic (TX-100), cationic (DTAB) and anionic (SDS) surfactants. $ME^{2+}$ hydrolyses and fades in neutral water and in this work we search the effects of surfactants on its fading rate. The rate of reaction showed remarkable dependence on the electrical charge of the used surfactants. It was observed that the reaction rate constant decreased in the presence of DTAB and SDS and increased in the presence of TX-100. Binding constants of $ME^{2+}$ to TX-100, DTAB and SDS and the related thermodynamic parameters were obtained by classical (or stoichiometric) model. The results show that binding of $ME^{2+}$ to TX-100 and DTAB are two-region and that of SDS is three-region. Also, the binding constants of $ME^{2+}$ to surfactant molecules in DTAB/TX-100 and SDS/TX-100 mixed solutions and their stoichiometric ratios were obtained.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.2051-2056
• /
• 2009

The rate constants of alkaline fading of malachite green ($MG^+$) was measured in the presence of nonionic (TX-100), cationic (DTAB) and anionic (SDS) surfactants. This reaction was studied under pseudo-first-order conditions at 283∼303 K. The rate of fading reaction showed noticeable dependence on the electrical charge of the used surfactants. It was observed that the reaction rate constants were increased in the presence of TX-100 and DTAB and decreased in the presence of SDS. According to Hughs-Ingold rules for nucleophilic substitution reactions, the electric charge of MG/surfactant compound along with decrease in dielectric constant of $MG^+$ micro-environment in this compound varies the rate of fading reaction. Binding constants of surfactant molecules to $MG^+$ were calculated using cooperativity, pseudo-phase ion exchange and classical models and the related thermodynamic parameters were obtained by classical model. The results show that the binding of $MG^+$ to TX-100 is exothermic and binding of $MG^+$ to DTAB and SDS in some concentration ranges of the used surfactants is endothermic and in the other ones is exothermic.

• KSBB Journal
• /
• v.26 no.5
• /
• pp.471-476
• /
• 2011

Nowadays biodiesel (fatty acid methyl ester, FAME) has been becoming an important issue as a desired alternative of energy products because of non-toxic, biodegradable properties, and lower exhaust emissions. During esterification of fatty acids or transesterification of oils and fats with short chain alcohols by the alkali-catalyzed methanolysis, FAME and unrefined glycerol are generated. Quantification of glycerol as a by-product is important because of a determinant of biodiesel quality. However, the glycerol analysis by gas chromatography (GC) method has laborious works with sample preparation, long time and cost of sample analysis. Thus, there is a need to analyze glycerol more simply. Herein we demonstrate that the colorimetric assay for glycerol analysis conducted by UV-vis spectrophotometer at the wavelength 617 nm whose peak is maximum intensity of malachite green, resulting in the red-shift occurred proportionally as a function of glycerol amount. Thus, it is considered the solvent media for malachite green fading for biodiesel production: (1) water, (2) MeOH, and (3) EtOH. The resulting findings show that the peak intensity at 617 nm in glycerol-malachite green mixture had a relationship between glycerol concentration and degree of peak shift as increase in pure glycerol concentration approximately at pH 7.0. However, when it was measured the unrefined glycerol concentration by diluting and adjusting with water to buffer (pH 7.0), it was not observed the absorption peak at 617 nm because of impurities and OH ions. In case of glycerol from biodiesel production factories, glycerol concentration could be successfully measured.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.1
• /
• pp.41-52
• /
• 2021

NiO and Co3O4-doped porous La(CoNi)O3 perovskite oxides were prepared from excess Ni addition by a hydrothermal method using porous silica template, and characterized as bifunctional catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) for Zn-air rechargeable batteries in alkaline solution. Excess Ni induced to form NiO and Co3O4 in La(CoNi)O3 particles. The NiO and Co3O4-doped porous La(CoNi)O3 showed high specific surface area, up to nine times of conventionally synthesized perovskite oxide, and abundant pore volume with similar structure. Extra added Ni was partially substituted for Co as B site of ABO3 perovskite structure and formed to NiO and Co3O4 which was highly dispersed in particles. Excess Ni in La(CoNi)O3 catalysts increased OER performance (259 mA/㎠ at 2.4 V) in alkaline solution, although the activities (211 mA/㎠ at 0.5 V) for ORR were not changed with the content of excess Ni. La(CoNi)O3 with excess Ni showed very stable cyclability and low capacity fading rate (0.38 & 0.07 ㎶/hour for ORR & OER) until 300 hours (~70 cycles) but more excess content of Ni in La(CoNi)O3 gave negative effect to cyclability.

• Journal of the Korean Chemical Society
• /
• v.38 no.12
• /
• pp.880-884
• /
• 1994

An indirect spectrophotometric method, presumably heretofore unmentioned, for the rapid determination of COD in the presence of chloride of high concentration is described. The alkaline sample is refluxed to react with a definite amount of permanganate, present in excess. A photometric measurement at 535 nm for the extent of the fading of the permanganate color after refluxing completes the procedure. The optimum conditions which give the absorbance-concentration plot the maximum linearity and slope in the range of 0∼5 ppm COD are as follows: reflux at $100\circC$ for 10 min in the presence of 0.15 mM permanganate and 0.2% NaOH with a sample size of 5 ml. An overall running time was less than 15 min. The t-test reveals that the proposed method is not significantly different from the official method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1963-1970
• /
• 2008

Natural indigo dye in powder form was prepared by modifying traditional Niram method, using $Ca(OH)_2$ instead of baked oyster powder for precipitating indigo dye. The prepared dye was applied to dyeing Tencel fabrics to investigate the effect of experimental conditions for the optimization of dyeing process. The indigo dye powder contained 15.2%(w/w) of indigo content and 0.757%(w/w) of indirubin content on the basis of HPLC analysis. Maximum dye uptake was obtained at $60^{\circ}C$ for 20min. Almost saturated dye uptake was obtained at 2g/L of sodium hydrosulfite concentration up to 4g/L of indigo dye and then slowly increased for further increase of sodium hydrosulfite. Whereas at higher indigo dye concentration(8g/L) more than 3g/L of reducing agent concentration was required for obtaining the maximum dye uptake. At the same indigo dye and reducing agent concentration, K/S value of the sample dyed without sodium hydroxide(pH 5.75) was 15.19, much higher than one dyed in alkaline condition(K/S 5.76). There was no difference in colorfastness ratings among samples with different color strength. However, more fading was occurred for the sample with low color strength.