• Environmental Engineering Research
• /
• v.11 no.2
• /
• pp.84-90
• /
• 2006

UV-catalytic oxidation technique was applied for the treatment of bio-refractory character of the leachate, which is generally present in the form of adsorbable organic halogens (AOX). Destruction of AOX was likely to be governed by pH adjustment, quantitative measurement of oxidants, and the selection of oxidation model type. Peroxide induced degradation ($UV/H_2O_2$) facilitated the chemical oxidation of organic halides in acidic medium, however, the system showed least AOX removal efficiency than the other two systems. Increased dosage of hydrogen peroxide (from 0.5 time to 1.0 time concentration) even did not contribute to a significant increase in the removal rate of AOX. In ozone induced degradation system ($UV/O_3$), alkaline medium (pH 10) favored the removal of AOX and the removal rate was found 11% higher than the rate at pH 3. Since efficiency of the $UV/O_3$ increases with the increase of pH, therefore, more OH-radicals were available for the destruction of organic halides. UV-light with the combination of both ozone and hydrogen peroxide ($UV/H_2O_2$ 0.5 time/$O_3$ 25 mg/min) showed the highest removal rate of AOX and the removal efficiency was found 26% higher than the removal efficiency of $UV/O_3$. The system $UV/H2O_2/O_3$ got the economic preference over the other two systems since lower dose of hydrogen peroxide and relatively shorter reaction time were found enough to get the highest AOX removal rate.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.57-64
• /
• 2008

In general, the entire of paper mulberry bark, which is not cut into pieces with an appropriate length, have been used in the pulping. This kind of pulping method couldn't accomplish the improvement of beating and sheet forming efficiency. For this reason, we investigated the effects of the cutting length of paper mulberry bast fiber on pulping and Hanji (Korean traditional paper) properties, in order to develop high quality Hanji manufacturing process. The cutting length variation of paper mulberry white bast did not great effects on pulp yields. The pulp yields based on pulping methods were sulfomethylated pulping av. 57.4%, alkali-hydrogen peroxide pulping av. 55.4%, and alkaline pulping av. 53.5% respectively. The optical properties such as brightness, opacity, scattering coefficient, and absorption coefficient were slightly improved by the increase of paper mulberry white bast cutting length. The increase of paper mulberry white bast cutting length resulted in poor sheet formation. Physical properties such as breaking length, TEA, tear index, burst index, and folding endurance were slightly improved by the increase of cutting length. The modified pulping processes, which used sulfomethylated method and alkali-hydrogen peroxide method, showed better pulp and sheet properties than conventional alkaline pulping.

• Analytical Science and Technology
• /
• v.31 no.1
• /
• pp.47-56
• /
• 2018

Finding the blood left at a crime scene is very important to reconstruct or solve a criminal case. Although numerous reagents have been developed for use at crime scenes, luminol is the most representative. Bluestar Forensic has been used in recent years, but is expensive and cannot be stored after preparation. This study aims to develop a new luminol reagent that can be stored for a long period of time while maintaining the chemiluminescence intensity at the level of Bluestar Forensic. Because luminol dissolves well in aqueous alkaline solutions, the use of sodium hydroxide in the preparation of luminol reagents can promote the decomposition of hydrogen peroxide. Magnesium sulfate, sodium silicate, and potassium triphosphate have been used as hydrogen peroxide stabilizers. The effects of the addition of these substances on the chemiluminescence emission intensity and the storage period of the luminol reagents were confirmed. The addition of a hydrogen peroxide stabilizer was shown to have no significant affect on the chemiluminescence emissions intensity or stabilized pH of the luminol reagent during storage. It also greatly increases the shelf life of the reagents. The use of magnesium sulfate as a hydrogen peroxide stabilizer is the most appropriate. When sodium perborate is used instead of hydrogen peroxide as an oxidizing agent, there is no significant change in the sensitivity and chemiluminescence emissions intensity, but the storage period is shortened. However, after the reaction with blood, the pH of the mixed solution does not increase significantly, and is judged to be more suitable than a reagent made of hydrogen peroxide.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.84-99
• /
• 2001

This study was carried out to acquire basic data necessary for the use of rice-straw chemical pulp. It investigated the proper bleaching conditions when rice-straw chemical pulp(alkaline sulfite-${Na_2}{S_2}{O_4}$) was bleached using the various kinds of bleaching agents by the two-stages bleaching methods. And, physical properties of pulps bleached with eight kinds of two-stages bleaching methods were tested. The results of this study were as follow; 1. The first-stage bleaching was conducted under the proper conditions with chlorine(C). And then, the proper conditions related to the calcium chlorite(H), hydrogen peroxide(P) and sodium hydrosulfite(Y) bleaching as the second-stage bleaching were investigated. The proper conditions of CH stage were determined to be 0.3% concentration of calcium chlorite, $30^{\circ}C$ of reaction temperature and 20min. of reaction time. For CP stage, the proper conditions of concentration of hydrogen peroxide, reaction temperature and reaction time were 1.5%, $60^{\circ}C$ and 90min., respectively. And for CY stage, the proper conditions were 0.5% concentration of sodium hydrosulfite, $40^{\circ}C$ of reaction temperature and 90min. of reaction time. 2. The first-stage bleaching was conducted under the proper conditions with chlorine dioxide(D). And then, the proper conditions related to the calcium chlorite(H), hydrogen peroxide(P) and sodium hydrosulfite(Y) bleaching as the second-stage bleaching were investigated. The proper conditions of DH stage were determined to be 0.5% concentration of calcium chlorite, $25^{\circ}C$ of reaction temperature and 5min. of reaction time. For DP stage, the proper conditions of concentration of hydrogen peroxide, reaction temperature and reaction time were 1.0%, $70^{\circ}C$ and 90min., respectively. And for DY stage, the proper conditions were 0.3% concentration of sodium hydrosulfite, $50^{\circ}C$ of reaction temperature and 20min. of reaction time. 3. The first-stage bleaching was conducted under the proper conditions with calcium chlorite(H). kAnd then, the proper conditions related to the hydrogen peroxide(P) and sodium hydrosulfite(Y) bleaching as the second-stage bleaching were investigated. The proper conditions of HP stage were determined to be 0.3% concentration of hydrogen peroxide, $30^{\circ}C$ of reaction temperature and 60min. of reaction time. For HY stage, the proper conditions of concentration of sodium hydrosulfite, reaction temperature and reaction time were 2.5%, $60^{\circ}C$ and 30min., respectively. 4. When the rice-straw chemical pulps were bleached with eight kinds of two-stages bleaching methods in the proper conditions mentioned above, respectively, the final brightnesses after CH, CP, CY, DH, DP, DY, HP, and HY bleachings were 62.0, 74.3, 61.4, 58.9, 66.9, 62.9, 50.4 and 60.1, respectively. And strengthes of pulps bleached with DP and DH methods were comparatively higher than those of pulps bleached with other bleaching methods.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.4
• /
• pp.558-563
• /
• 2001

A new alkalophilic strain of Bacillus pumilus JB¬05 producing bleach-stable and halo-tolerant alkaline protease was isolated from cement industry effluents in Karnataka, India. The effects of carbon and nitrogen sources on protease production by this alkalophilic strain were observed after a 30-h incubation. A high level of alkaline protease activity was obtained in the presence of starch as the carbon and peptone as the nitrogen sources. The partially purified enzyme showed an optimum temperature and pH activity at $58^{\circ}C$ and 10.5, respectively. The enzyme was completely inhibited by PMSF (95.0%) indicating it as a serine protease. It is bleach-stable as it retained 35% original activity in the presence of 10% (v/v) hydrogen peroxide at $30^{\circ}$C after 2 h and is halo-tolerant as it retained 70% original activity in the presence of 2.5 M sodium chloride at $30^{\circ}C$ after 2 h incubation.

• Journal of Electrochemical Science and Technology
• /
• v.5 no.3
• /
• pp.73-81
• /
• 2014

This paper describes the continuous flow operation of membraneless sodium perborate fuel cell using acid/alkaline bipolar electrolyte. Here, hydrazine is used as a fuel and sodium perborate is used as an oxidant under Alkaline-acid media configuration. Sodium perborate affords hydrogen peroxide in aqueous medium. In our operation, the laminar flow based microfluidic membranleless fuel cell achieved a maximum power density of $27.2mW\;cm^{-2}$ when using alkaline hydrazine as the anolyte and acidic perborate as the catholyte at room temperature with a fuel mixture flow rate of $0.3mL\;min^{-1}$. The simple planar structured membraneless sodium perborate fuel cell enables high design flexibility and easy integration of the microscale fuel cell into actual microfluidic systems and portable power applications.

• Applied Biological Chemistry
• /
• v.37 no.5
• /
• pp.326-333
• /
• 1994

Pleurotus florida with high cellulase activity as well as lignin degradability was selected out among strains for fermentation of the rice straw to improve the nutritive value. When the rice straw was fermented by P. florida, the contents of hemicellulose, cellulose and lignin were decreased to 22.5%, 11.4% and 28.1%, respectively, whereas the contents of rice straw fermented after pretreatment with $H_2O_2$ or alkaline hydrogen peroxide were decreased much in the lower concentration. The content of T-N (total-nitrogen) and crude fat was increased with the longer fermentation period. The amino acid content of rice straw fermented by P. florida in 30 days was increased to 28.9% and 35.1% as the rice straw was fermented after pretreatment without and with 4% $H_2O_2$, respectively. The crystalline intensity of rice straw was decreased by pretreatment with 4% $H_2O_2$ and fermentation by P. florida. However, the crystall intensity was increased by treatment with alkaline hydrogen peroxide and the more when the straw was washed after the treatment. When the rice straw was fermented by P. florida for 30 days, the in vitro organic matter digestibility was increased up to 6% of $H_2O_2$ pretreatment.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.1
• /
• pp.55-63
• /
• 1995

Alkaline solutions such as $NH_4$OH, choline and TMAH (($CH_3$)$_4$NOH) have been introduced in semiconductor wet processing of silicon wafers to control ionic and particulate impurities following etching in acidic solutions. These chemicals usually mixed with hydrogen peroxide and/or surfactants to control the etch rate of silicon. The highest etch rate was observed in $NH_4$OH solutions at a pH in alkaline solutions. It indicates that the etch rate depends on the content of $OH^{-}$ as well as cations of alkaline solutions. STM/AFM techniques were used to characterize the effect of alkaline solutions on silicon surface roughness. In SC1 (mixture of $NH_4$OH : $H_2$$O_2$ : $H_2$O) solutions, the reduction of the ammonium hydroxide proportion from 1 to 0.1 decreased the surface roughness ($R_{rms}$) from 6.4 to $0.8\AA$. The addition of $H_2$$O_2$ and surfactants to choline and TMAH reduced the values of $R_{p-v}$ and $R_{rms}$ significantly. $H_2$$_O2$ and surfactants added in alkaline solutions passivate bare silicon surfaces by the oxidation and adsorption, respectively. The passivation of surfaces in alkaline solutions resulted in lower etch rate of silicon thereby provided smoother surfaces.s.ces.s.

• Journal of Animal Science and Technology
• /
• v.63 no.4
• /
• pp.841-853
• /
• 2021

This study aimed to investigate the effects of Kimchi cabbage by-products either treated or untreated with calcium oxide (CaO) and alkaline hydrogen peroxide (AHP) as substitutional ingredient of total mixed ration (TMR) on in vitro fermentation, in situ disappearance and growth performance of Holstein steers. Cannulated Holstein (600 ± 47 kg) was used for both the in vitro and in situ experiments. The treatments used were TMR only (CON), TMR + 30% Kimchi cabbage by-products fresh matter (FM) basis (TC), TMR + 30% Kimchi cabbage by-products FM basis + 5% CaO FM basis (TCC), and TMR + 30% Kimchi cabbage by-products FM basis + 5% CaO FM basis + 3.22% AHP FM basis (TCCA). For in vivo experiment, thirty-four Holstein steers (273 ± 45 kg) were subjected to a 150-day feeding trial, divided into two groups: CON and TC. In the in vitro experiment, pH of TCCA was greatest (p < 0.05) among other treatments at all incubation times. Ammonia nitrogen and volatile fatty acid concentrations were not significantly different for each treatment. However, butyrate was greater (p < 0.05) in TCC and CON than in both TC and TCCA. During in situ experiment, the dry matter (DM) disappearance was greatest (p < 0.05) in TCCA among other treatments. Also, disappearance of neutral detergent fiber (NDF) and acid detergent fiber (ADF) were observed greatest (p > 0.05) in TCCA treatment. In the in vivo experiment, average daily gain (ADG) did not differ between CON and TC. In blood profile analysis, alanine aminotransferase, aspartate aminotransferase, glucose, total cholesterol, high-density lipoprotein cholesterol, low-density lipoprotein cholesterol, and total protein concentration were not significantly different between treatments. But, creatinine concentration was greater (p < 0.05) in TC than in CON. Overall results suggest that Kimchi cabbage by-products either treated or untreated with CaO and AHP can be used as substitutional ingredient in TMR for Holstein steers.

• Journal of Korea Soil Environment Society
• /
• v.4 no.1
• /
• pp.49-55
• /
• 1999

The treatment of petroleum contaminated soil requires various physico-chemical remediation technologies which are efficient in time and can reduce the possibility of secondary contamination by themselves In this study, an innovated soil washing process was proposed to treat the diesel-contaminated soil. Micro-bubbles, which were generated by hydrogen peroxide, deserted and floated the contaminants. Soils less than #60(0.25mm) were artificially contaminated by 6,500mg TPH/kg dry soil initially. The process was examined for pH, the soil to water mixing ratio, concentration of $H_2O$$_2$, and contacting times. In the case of less than #60 soil, maximum removal efficiency(60%) was obtained at pH 12. 1.0% hydrogen peroxide, and 1 : 5 soil to water mixing ratio for 1 hour.