• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 가을 학술발표회 논문집
• /
• pp.50-53
• /
• 1992

The damages due to alkali-aggregate reaction between the reactive silicia constituents of the aggregate and the alkalies in cement have been frequently reported since 1923 in America . Recently alkali-aggregate reaction, especially alkali-silica reaction, can be found all over the area using crushed stones. The first research, in 1990, was performed to identify the alkali-silica reactivity of 18 sets of crushed stones used in domestic ready-mixed concrete plant as coarse aggregates by 4 petrollgical, chemical and mortar bar method, And the study was continued with 10 sets of crushed stones in this research. It was found that all the aggregates used in this study are innocuous at alkali-silica reaction.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.195-196
• /
• 2020

This study evaluated the mechanical properties and alkali silica reaction of mortar according to the mixing ratio of waste glass. As a result, as the mixing ratio of the waste glass increased, the compressive and flexible strength of the mortar decreased due to the slip of aggregate, and the alkali-silica reaction(ASR) increased. So, it is considered that research is needed to prevent slip and ASR of the waste glass aggregate in order to use the waste glass as a fine aggregate for concrete.

• International Journal of Concrete Structures and Materials
• /
• 제1권1호
• /
• pp.75-81
• /
• 2007

The concrete pavement of the Seohae Highway in Korea has suffered from serious distress, only four to seven years after construction. Deterioration due to Alkali-Silica Reaction (ASR) has seldom been reported per se in Korea, because the aggregate used for the cement concrete has been considered safe against alkali-silica reaction so far. The purpose of this study is to examine the deterioration caused by an alkali-silica reaction of concrete pavement in Korea. The investigation methods included visual inspection and Automatic Road Analyzer (ARAN) analysis of surface cracks, coring for internal cracks, stereo microscopic analysis, scanning electronic microscope (SEM) analysis, and electron dispersive X-ray spectrometer (EDX) analysis. The results are presented as follows: the crack pattern of the concrete pavement in Korea was longitudinal cracking, map cracking or D-cracking. Local areas of damage were noticed four to five years after construction. The cracks started from edges or joints and spread out to slabs. The most intensive cracking was observed at the intersection of the transverse and longitudinal joints. Where cracking was the most intense, pieces of concrete and aggregate had spalled away from top surface and joint interface area. The progress of deterioration was very fast. The reaction product of alkali-silica gel was clearly identified by its generally colorless, white, or very pale yellow hue seen through a stereo optical microscopy. The typical locations of the reaction product were at the interface between aggregate and cement paste in a shape of a rim, within aggregate particles in the cracks, and in the large void in the cement paste. Most of the white products were found at interface or internal aggregates. SEM and EDX analysis confirmed that the white gel was a typical reaction product of ASR. The ASR gel in Korea mainly consisted of Silicate (Si) and Potassium (K) from the cement. The crack in the concrete pavement was caused by ASR. It seems that Korea is no longer safe from alkali-silica reaction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.103-107
• /
• 1993

The Alkali Aggregate Reaction(AAR), reported first by T. E. Stanton in 1940, is a reaction between certain siliceous aggregate and hydroxyl ions present in the pore fluid of a concrete. The damage of concrete structures, deteriorated by AAR, have been reported since using the crushed stones caused by the exhaustion of natural aggregates. This study was performed to investigate the AAR of crushed stones using chemical analysis, polarization microscope, XRD, chemical method(KS F 2545, ASTM C 289), mortar bar method(KS F 2546, ASTM C 227) and Scanning Electron Microscope(SEM) and Energy Dispersive X-ray Analysis (EDXA) of reaction products by AAR in mortar bar.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.155-156
• /
• 2017

Borosilicate glass was incorporated to improve the neutron shielding capability of concrete. Boron is a typical neutron shielding material, and it is contained in borosilicate glass. However, borosilicate glass causes alkali-silica reaction, which damages the concrete. Therefore, studied to reduce the expansion due to alkali-silica reaction and to improve the neuton shielding capability. The measurement of the expansion due to the alkali-silica reaction was based on ASTM C 1260. Experimental results show that the expansion due to alkali-silica reaction is reduced when borosilicate glass powder incorporated. In addition, the neutron shielding capability was significantly improved when the fine aggregate replaced with borosilicate glass.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.31-32
• /
• 2020

This study measured the mechanical performance and residual strength of high strength/normal strength mortar mixed with waste glass fine aggregate after alkali-silica reaction and alkali-silica reaction. As a result, the effect of improving the slip phenomenon of the waste glass fine aggregate in the high-strength mortar was not significant, but rather the amount of ASR was increased.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 봄 학술발표회 논문집
• /
• pp.93-98
• /
• 1991

The damages due to alkali-aggragate reaction between the reactive silica constituents of the aggregate and the alkalies in cement have been frequently reported since 1923 in America. Recently, alkali-aggregate reaction, especially alkali-silica reaction, can be found all over the area using crushed stones. This research was performed to indentify the alkali-silica reactivity of 18 sets of crushed stones being used currently in domestic reacy-mixed concrete plant as coarse aggregates by petrollogical, chemical and mortar bar method. It is found that all the aggregates used in this study are innocuous at alkali-silica reaction. Further study will be carried out with some aggregates in more severe conditions.

• 자원리싸이클링
• /
• 제29권2호
• /
• pp.18-27
• /
• 2020

강원도 삼척시와 평창군, 전라북도 김제시와 고창군 및 경상남도 고령군에서 채취한 62종의 산림골재와 순환골재를 대상으로 알칼리골재 잠재가능성을 평가하기 위해 화학적 실험법인 KS F 2545와 물리적 실험법인 ASTM C 1260을 수행하였다. 화학법 실험결과 규산염계 암석과 탄산염계 암석이 혼재된 경우 알칼리농도감소량이 높게 나타나 알칼리골재 잠재가능성 결과에 교란을 발생시키는 것으로 확인되었다. 62종의 골재 중 용해실리카량이 100 mmol/ℓ를 초과하는 골재는 9종이며, 이들의 물리적 실험결과 모르타르바의 길이증가율이 0.1~0.2%인 골재는 5종, 0.2% 이상인 골재는 2종으로 확인되었다. 화학법과 모르타르바법을 이용한 알칼리골재반응 시험결과, 알칼리골재 잠재반응을 보인 골재는 사암과 응회암이다. 따라서 쇄설성 퇴적암류와 화산 쇄설성 암석 골재를 사용하기 위해서는 알칼리골재 반응 시험들이 필요하다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.363-368
• /
• 2000

This paper is an introduction of pessimum program for the identification of alkali-silica reaction of alkali-aggregate reaction which is known as one of a major factor of concrete deterioration. A series of gel-pat testing program was undertaken to observe the reactivity of potentially alkali-silica reactive concrete aggregates which were found to be reactive by previous petrographic examination (ASTM C 295). And then a pessimum program was performed in accordance with mortar-bar test method (ASTM C 227) with different percentage of those reactive components included in the fine aggregate source to determine the pessimum quantity. Chert and quartzite were found to be major components of reactive mineral/rock, and the pessimum condition for chert was about 3%, even though the test was performed with up to 25% of the component. In the case of quartzite, however, the mortar-bar expansion appeared to be directly proportional to the amount of quartzite sample with increasing tested quantity up to 35%. Both of the expansion results were well 3 and 6 month specified maximum limitation of 0.05% and of 0.1% respectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 가을 학술발표회 논문집
• /
• pp.25-30
• /
• 1992

Since the first report on the damage of concrete structures due to alkali-aggregate reaction by T.E Stanton in 1940, cases of the damage are being reported in many countries. in the country, it is necessary to research the alkali-aggregate reaction of the crushed stone because of the short comings of natural aggregate and increasing needs of crushed stones. In this research, crushed stones from 63 local sites are collected and tested by ASTM C 289 chemical method.. The results show that most of the crushed stones are innocuous. However, the crushed stones from three sites are deleterious to the reaction by JIS A 5308. Petrographic and Mortar-Bar test will be carried out to find out any possibility of deleteriousness of the crushed stones