• Journal of the Korea Institute of Building Construction
• /
• v.11 no.1
• /
• pp.83-90
• /
• 2011

The purpose of this research is to investigate the effect of AFm formation on the stiffening process of cement paste. High and low alkali sulfate clinkers were used for the experiments. The flow and stiffening behavior of cement paste was investigated using modified ASTM C403 penetration resistance test and oscillatory shear rheology. X-ray powder diffraction (XRD) was used for phase identification associated with stiffening of the paste. It was found from the results that low alkali clinker mixture produced very strong premature stiffening whereas high alkali clinker mixture did not cause premature stiffening. This is because of the large amount of alkali sulfate present in the clinker. Addition of calcium and sodium chloride to the high alkali clinker mixture caused faster stiffening and set.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.4
• /
• pp.321-329
• /
• 2016

The use of ternary blended cement consisting of Portland cement, granulated blast-furnace slag (GGBFS) and fly ash has been on the rise to improve marine concrete structure's resistance to chloride attack. Therefore, this study attempted to investigate changes in chloride attack resistibility of concrete through NT Build 492-based chloride migration experiments and test of concrete's ability to resist chloride ion penetration under ASTM C 1202(KS F 2271) when 1.5-2.0% of alkali-sulfate activator (modified alkali sulfate type) was added to the ternary blended cement mixtures (40% ordinary Portland cement + 40% GGBFS + 20% fly ash). Then, the results found the followings: Even though the slump for the plain concrete slightly declined depending on the use of the alkali-sulfate activator, compressive strength from day 2 to day 7 improved by 17-42%. In addition, the coefficient from non-steady-state migration experiments for the plain concrete measured at day 28 decreased by 36-56% depending on the use of alkali-sulfate. Furthermore, total charge passed according to the test for electrical indication of concrete's ability to resist chloride ion penetration decreased by 33-62% at day 7 and by 31-48% at day 28. As confirmed in previous studies, reactivity in the GGBFS and fly ash improved because of alkali activation. As a result, concrete strength increased due to reduced total porosity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.865-871
• /
• 2009

Chondroitin sulfate was extracted by alkali method and enzyme method from shark cartilage. In extract system, various processing parameters such as concentration of alkali and alcarase, temperature etc, have been investigated for optimization condition. The pure chondroitin sulfate was obtained by UF membrane separation. The characteristics was also investigated with gel permeation chromatograpy(GPC). The molecular weight of chondroitin sulfate was $2.7\times10^4$ Da.

• Cement Symposium
• /
• no.20
• /
• pp.119-125
• /
• 1992

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.94-101
• /
• 2016

This paper presents an investigation into the durability alkali-activated materials(AAM) mortar and paste samples manufactured using fly-ash(FA) and ground granulated blast furnace slag(GGBFS) exposed to a sulfate environment with different GGBFS replace ratios(0, 30, 50 and 100%), sodium silicate modules($Ms[SiO_2/Na_2O]$ 1.0, 1.5 and 2.0) and initial curing temperatures($23^{\circ}C$ and $70^{\circ}C$). The tests involved immersions for a period of 6 months into 10% solutions of sodium sulfate and magnesium sulfate. The evolution of compressive strength, weight, length expansion and microstructural observation such as x-ray diffraction were studied. As a results, as higher GGBFS replace ratio or Ms shown higher compressive strengths on 28 days. In case of immersed in 10% sodium sulfate solution, the samples shows increase in long-term strength. However, for samples immersed in magnesium sulfate solutions, the general observation was that the compressive strength decreased after immersion. The most drastic reduction of compressive strength and expansion of weight and length occurred when GGBFS or Ms ratios were higher. Also, the XRD analysis of samples immersed in magnesium sulfate indicated that expansion of AAM caused by gypsum($CaSO_4{\cdot}2H_2O$); the gypsum increased up to 6 months continuously.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.3
• /
• pp.271-275
• /
• 1999

The chemical and gelling properties of porphyran from Porphra yezoensis collected from Buan and Wido in Korea at different months of the year were studied. Crude porphyran was prepared by hot-water extraction and further purified by cetylpyridinium chloride precipitation, Crude porphyran and porphyran were modified by alkali treatment to eliminate sulfate. The yields of alkali-modified crude porphyran (AMCP) and porphyran(AMP) were between $4.9\~10.9\%$ and $4.0\~6.7\%$ of the dried algae weight and were maximum in February for Buan and January for Wido, respectively. Gel strength of AMCP were highest in February ($790g/cm^2$) for Buan and January ($740 g/cm^2$) for Wido. Alkali modification increased 3,6-anhydro galactose content and the molar ratio of galactose and 3,6-anhydrogalactose of AMCP and AMP showed 1 : 0,8$\~$1.1. GLC and FT-IR measurement of AMP showed that most of sulfate residues were combined to C-6 of galactose, Thus, results of this study suggest that crude porphyran extracted from Porphra yezoensis produces an agar of a reasonably good quality after alkali treatment.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.215.1-215
• /
• 2003

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.391-399
• /
• 2013

For high strength concrete of 40~60 MPa, the effects on the early strength and concrete dry shrinkage properties replacing 60~80% of Ordinary Portland Cement with Blast Furnace Slag Powder and using the Alkali Activator (Modified Alkali Sulfate type) are considered in this study. 1% Alkali Activator to the binder, cumulative heat of hydration for 72 hours was increased approximately 45%, indicating that heat of hydration contributes to the early strength of concrete, and the slump flow of concrete decreased slightly by 3.7~6.6%, and the 3- and 7- strength was increased by 8~12%, which that the Alkali Activator (Modified Alkali Sulfate type) is effective for ensuring the early strength when manufacturing High Strength Concrete (60%) of Blast Furnace Slag Powder. Furthermore, the dry shrinkage test, both 40 MPa and 60 MPa specimens had level of length changes in order of BS40 > BS60 > BS60A > BS80A, and the use of the Alkali Activator somewhat improved resistance to dry shrinkage.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.161-169
• /
• 2008

Purpose: To better understand the corneal regeneration after alkali burn regarding the initial clinical progression and the therapy, we investigated the changes of the multi factors following chemical injury in cornea. Methods: This study was performed to observation on the healing process of alkali burned cornea in aspect of immunohistochemistry by immunofluorescence or H-E staining and TUNEL assay. Results: The results showed that although a healing process occurred after alkali burn, apoptosis of epithelial, stromal and endothelial cells in the cornea was continuously observed. Neovascularization and expression of ${\alpha}$-smooth muscle actin (${\alpha}$-SMA) from limbus and from injured cornea, respectively, were observed after 3 days of alkali burn. Formation of collagen III in corneal stroma and increased expression of chondroitin sulfate are coincident with expression of ${\alpha}$-SMA and transforming growth factor-${\beta}$ (TGF-${\beta}$). Conclusions: These data suggest that medical treatment within 3 days of alkali burn will be effective to inhibit neovascularization and formation of collagen III and chondroitin sulfate. This study extends our immumohistochemical understanding of healing process in alkali burned cornea, and the results get in this study will be cornerstones in the development of therapeutic agent for accelerating renewal of chemical damaged cornea.

• Korean Journal of Materials Research
• /
• v.18 no.4
• /
• pp.218-221
• /
• 2008

A $Fe(OH)_2$ suspension was prepared by mixing iron sulfate and a weak alkali ammonia solution. Following this, iron oxides were synthesized by passing pure oxygen through the suspension (oxidation). The effects of different reaction temperatures ($30^{\circ}C$, $50^{\circ}C$, $70^{\circ}C$) and equivalent ratios ($0.1{\sim}10.0$) on the formation of iron oxides were investigated. An equilibrium phase diagram was established by quantitative phase analysis of the iron oxides using the Rietveld method. The equilibrium phase diagram showed a large difference from the equilibrium phase diagram of Kiyama when the equivalent ratio was above 1, and single $Fe_3O_4$ phase only formed above an equivalent ratio 2 at all reaction temperatures. Kiyama synthesized iron oxide using iron sulfate and a strong alkali NaOH solution.