• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.3
• /
• pp.217-223
• /
• 2016

In this research, a continuous roll-to-roll screen printing system was developed using a flat screen. It has a newly devised sliding mechanism of screen printing module, which can be controlled accurately in sync with a moving web, driven by a roll-to-roll tension control and web-guiding system. In addition, the real-time precision alignment module that consists of a vision camera and an $X-Y-{\theta}$ alignment stage was implemented. With this developed system, the feasibility of continuous printing with minimum pattern width below $60{\mu}m$ was verified, and an overlay of ${\pm}60{\mu}m$ between the laser-patterned reference mark and the printed mark on a 300-mm-wide film was achieved.

• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.14-20
• /
• 2020

In OLED panel production process, it is necessary to cut a part of protective film as a preprocess for lighting inspection. The current method is to recognize only the fiducial mark of the cut-out panel. Bare Glass Cutting does not compensate for machining cumulative tolerances. Even though process defects still occur, it is necessary to develop technology to solve this problem because only the Align Mark of the panel that has already been cut is used as the reference point for alignment. There is a lot of defective lighting during panel lighting test because the correct protective film is not cut on the panel power and signal application pad position. In laser cutting process to remove the polarizing film / protective film / TSP film of OLED panel, laser processing is not performed immediately after the panel alignment based on the alignment mark only. Therefore, in this paper, we performed real time inspection which minimizes the mechanism tolerance by correcting the laser cutting path of the protective film in real time using Machine Vision. We have studied calibration algorithm of Vision Software coordinate system and real image coordinate system to minimize inspection resolution and position detection error and edge detection algorithm to accurately measure edge of panel.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.32-35
• /
• 1997

A recent development in the Flat Panel Display(FPD) industry requires an auto-alignment system which is operated in high speed and high precision. In the FPD production process, aligning photo-mask with respect to guide mark printed in the glass should be accomplished in the accuracy of sub-micron order. So the system has high bandwidth and needs a dedicated control system which is fast and robust enough to control linear motors in precise manner. Proposed auto-alignment system structure in this presentation which consists of the master controller board, the DSP position controller board which controls 3 axis precision linear motors, the servo system and the man machine interface software. Designed and tuned under repeated experiments, the proposed system showed a reasonable performance in the aspect of rise time and steady state error.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.88-95
• /
• 2003

This paper presents the measurement and correction method of PCB alignment errors for PCB screen printer. Electronic equipment is getting smaller and yet must satisfy high performance standard. Therefore, there is a great demand for PCB with high density. However conventional PCB screen printer doesn't have enough accuracy to accommodate the demand fur high-resolution circuit pattern and high-density mounting capacity of electronic chips. It is because the alignment errors of PCB occur when it is loaded to the screen printer. Therefore, this study focuses on the development of the system which is able to measure and correct alignment errors with high-accuracy. An automatic optical inspection part measures the PCB alignment errors using machine vision, and the high-accuracy 3-axis stage makes correction for these errors. This system used two CCD cameras to get images of two fiducial marks of PCB. The geometrical relationship between PCB, cameras, and xy$\theta$ stage is derived, and analytical equations for alignment errors are also obtained. The unknown parameters including camera declining angles and etc. can be obtained by initialization process. Finally, the proposed algorithm is verified by experiments by using test bench.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.2
• /
• pp.117-123
• /
• 2006

The purpose is to study the identification method of Huangjinju powder for injection and the medicinal materials by the fingerprint off-ray Diffraction Fourier (XRDF). We used the same method on both the studying of Huangjinju and the medicinal materials. Then we selected a few components alignment to compare. We analyzed the data by setting up the deviation $d({\AA})$ as ${\pm}0.05$ to calculate the rate of special mark on the sample (Px) and on the patent (P). The special XRDF of Huangjinju$[d({\AA})/(I/I_0)]$ have 5 peaks that have not expressed in medicinal materials. Therefore Px is 22.73%. Flos Trollii Chinensis has 3 special marks and Px is 17.65%. Flos Chrysanthemi Indici has 1 special mark and Px is 3.57%. Its coincided interplanar spacing with the patent is $2.907{\AA}$. Flos Lonicerae Japonicae has 6 special marks and Px is 23.08%. Its special mark in the patent are 4.95/14 and 4.50/15, respectively. The P is 9.09%. Its coincided interplanar spacing with the patent is $2.910{\AA}\;and\;3.05{\AA}$, respectively. The number of special XRDF mark peaks of baicalin is 9 and Px is 18.37%. Its coincided interplanar spacing with the patent is $2.910{\AA}$. It has visible mark and specificity adopting XRDF fingerprint to identify Huangjinju and medicinal materials. Establishing the quality standard is a synthetic index that depends both on special marks in the medicinal materials of the patent and on the coincidence peak data.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.193-197
• /
• 2004

The effect of the temperature dependence of the smectic layer spacing in the smectic-A (SmA) phase on the formation of defects in the ferroelectric smectic-$C^{\ast}$ ($SmC^{\ast}$) phase is investigated with x-ray scattering technique. The study is based on thin parallel-aligned surface stabilized ferroelectric liquid crystal cells with two different alignment conditions, high pretilt $SiO_x$, alignment and low pretilt polyimide films. It is found that defects observed in the $SmC^{\ast}$ phase have much more profound dependence on the layer changes and chevron formation in the SmA phase than in the $SmC^{\ast}$ phase. We find that thermal layer expansion with decreasing temperature in the SmA phase suppresses the formation of defects observed in the SmC phase.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.99-102
• /
• 2002

Pinholes on the thermally grown oxide, which is called gate oxide, on silicon substrate under polysilicon layer are found and its mechanism is analyzed in this paper. The oxide under a polysilicon layer is broken during the plasma etching process of other polysilicon layer. Both polysilicon layers are separated with 0.8${\mu}{\textrm}{m}$ thick oxide deposited by CVD (Chemical Vapor Deposition). Since broken oxide points are found scattered around an arc occurrence point, it is assumed that an extremely high electric field generated near the arc occurrence point makes the gate oxide broken. 1'he arc occurrence point has been observed on the alignment key and is the mark of low yield. It is found that any arc occurrence can cause chips to fail by breaking the gate oxide, even if are occurrence points are found on scribeline.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3012-3014
• /
• 1999

CCD 카메라를 이용한 화상처리가 최근 많은 분야에서 활용되고 있다. 특히 반도체 장비, 정밀 위치결정 시스템, 그리고 정밀 Alignment시스템과 같이 정밀한 제어가 요구되는 시스템에서 정화한 화상처리 기술이 요구되고 있다. 본 논문은 화상처리를 이용한 마크 인식에 관한 방법으로 CCD카메라로 부터 얻은 영상에 노이즈가 상당히 포함되어 있는 경우와 마크의 일부분만 보이는 경우에 마크를 정화히 찾는 방법에 관한 연구이다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4903-4929
• /
• 2018

In this study, a fully automatic pose and expression invariant 3D face alignment algorithm is proposed to handle frontal and profile face images which is based on a two pass course to fine alignment strategy. The first pass of the algorithm coarsely aligns the face images to an intrinsic coordinate system (ICS) through a single 3D rotation and the second pass aligns them at fine level using a minimum nose tip-scanner distance (MNSD) approach. For facial recognition, multi-view faces are synthesized to exploit real 3D information and test the efficacy of the proposed system. Due to optimal separating hyper plane (OSH), Support Vector Machine (SVM) is employed in multi-view face verification (FV) task. In addition, a multi stage unified classifier based face identification (FI) algorithm is employed which combines results from seven base classifiers, two parallel face recognition algorithms and an exponential rank combiner, all in a hierarchical manner. The performance figures of the proposed methodology are corroborated by extensive experiments performed on four benchmark datasets: GavabDB, Bosphorus, UMB-DB and FRGC v2.0. Results show mark improvement in alignment accuracy and recognition rates. Moreover, a computational complexity analysis has been carried out for the proposed algorithm which reveals its superiority in terms of computational efficiency as well.

• Journal of Korean Society of Transportation
• /
• v.9 no.2
• /
• pp.101-120
• /
• 1991

The Subject of this research work is to study the driver's vision and eye-movement ch-aracteristics under the diffrent condiction of road traffic and driving. The analysis of this investigation was conducted spatially or temporaly into three parts'eye-mark distribution, viewing-time percentage and fixation duration. This dissertation focuses on analysis of dr-iver's visual characteristics to improve road circumstamces. In this study driver's ch-aracteristics are measured with eye-mark recorder and analyzed statistically The main features of this study are : 1st Duration distribution of fixation point is significant in 87% at 5% of the significant level in Gamma Distribution. The average of fixation duration by road are 0.33sec on streets 0.45sec on Roads and 0.86sec on highways. The average of fixation duration by visual objects are 0.4sec on road surface 0.26sec on road shoulder 0.49sec on traffic sign 0.37sec on warning sign and 0.67sex on gwide sign. 2st Moving anglrs of a fixation point are fit in the Exponential Distribution. The average moving angle is appeared to be 3.85。 on streets 2.81。 on roads 2.73。 on highway and 5 。 on intersecyion. 3st As a result of examining alignment of guide and warning sign in traffic signs cxisting foundation methods are less affected by lane than by apeed of a vehicle.