• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.191-198
• /
• 2014

PURPOSES : Safety consciousness can be the first factor to hinder the acceptance of design alternative, which moderates the applied design criteria in order to adapt the road to the natural terrain condition. METHODS : The method which enables to check the safety of design alternative by using design consistency concept is suggested. The method is based on the linked or interactive analysis between terrain and road alignment. Real design example is considered as a guide how to apply the method and the analysis result is discussed with the future research. RESULTS : Suggested method can be used for designers as a tool to review their design outputs can be safe as much as the original design. So, designers have the more objective judgement on their designs and have the confidence on their designs. CONCLUSIONS : The method is expected to be used as a tool to see the safety consciousness in an objective view, so any possible conflicts between designers and design-related personnels caused by the terrain-oriented design can be solved.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.57-67
• /
• 2008

At present engineers use the highway design speed concept to develop the horizontal alignment. This concept has a strength of attaining consistent horizontal alignments because of its use of a single speed value. Yet it shows a critical weakness that when opened the operating speed for the vehicles on the road can be a lot different than the design speed. To resolve this, many countries already develop the horizontal alignment by adopting procedures that weigh vehicle operating speeds, and this research joins them by developing an operating speed based horizontal alignment design. We have collected vehicle speed samples over the nation, selected some speed influential design elements by doing a statistical analysis, provided a set of models for two-lane roads and four lane roads, and showed a stepwise feedback procedure by doing a case study. It is underscored that in the case study the proposed procedure has scaled down the speed inconsistency problem, and we are of opinion that our procedure would coin both investment efficiency and speed consistency in future highway projects.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.121-126
• /
• 2013

PURPOSES: Road Design Consistency Evaluation can guarantee road alignments with safety factors, however it can be hard work to deal with general car accident factors in only this evaluation index. Ideal Road Design Consistency Evaluation is show the mutual balance of road alignment and human factors with a variety of factors for road safety. METHODS: This study carried out overall road safety evaluations which are methods of running speeding consistency and car platoon safety analysis (driver's behaviors factors) as well. RESULTS: Out of 13 sections in a experimental road layout, safety factors of 8 sections showed 'Good' or 'Fair' status. However, 'Poor' results were found out in 5 sections. Particularly, it showed the different outcomes among the 4 evaluation methods used in this study. CONCLUSIONS: Road safety countermeasures were proposed for the potentially dangerous sections in road which failed to identify in the other methods. This study will contribute toward future study of more reliable Road Design Consistency Evaluation in the future for road safety.

• Proceedings of the KOR-KST Conference
• /
• 2007.02a
• /
• pp.306-314
• /
• 2007

This paper is to develop a model for evaluation of highway alignment design considering the driver's behavior in order to enhance the highway safety. Under the conditions, this research included a new evaluation criteria development and an analysis on how to change evaluation criteria according to roadway alignments, to evaluate safety. The vehicle spacing and speed deviation are suggested as new evaluation index The evaluation criteria model can be used to compare the anticipated safety performance of two or more geometric alternatives for a proposed highway improvement.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.63-74
• /
• 2006

It's essential to meet the expectations of drivers through reasonable road design, which makes the drivers to recognize the conditions of road sufficiently. In this case, we could say that because the roads are consistently designed, drivers can make a safe and comfortable drive. There are so many studies about the alignment design consistency methods which are previously mentioned. In this study, Firstly we categorize the studies which are concerned with the estimation of the alignment design consistency methods and then apply the method which fits for the actual condition into the practice. And we'll make a realistic method by using the data which aye collected from the National Road. The developed model in this study is the predicting model including speed($V_t$) as the variable on the upper stream 100m of the curve. This model was developed which divided to two cases in the all directions of two lanes; One case is the $R{\leq}200m$ and another case is the R>200m. In the section of the $R{\leq}200m$, this case was influenced on the road alignment(R) and($V_t$) and another section was found that is affected to the speed($V_t$) on the upper stream loom rather than the effect of road alignment(R). In the case of all directions of four lanes, however, this study is predicted divided to two sections on the 400m of R, these section have more influenced to($V_t$) than the road alignment factors. This result of the four lanes was represented to different result with the two lanes. This study will further need development of the predicting model with the higher confidence through collecting data with more the exact data, the various road alignment data and speed of the several sections on the upper stream on the curve.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.129-136
• /
• 2014

PURPOSES : This study devotes its energies to estimate greenhouse gas emissions for types of horizontal highway designs. METHODS : This paper suggested two types of road scenarios, scenario 1 is made by the lack of road design consistency. Beside scenario 1, scenario 2 is made by good road design. For comparisons of greenhouse gas emissions, driving simulator was used. RESULTS : Emission rates of road scenario 1 are 1.4 times higher than scenario 2 in the driving simulator. CONCLUSIONS : This study may have important implications for contributing to the application of road alignment technology for reduction of greenhouse gases as quantifying the correlations between greenhouse emissions and various road alignments. Consequently, this study will help road designers determine which roads are best alternatives in the process of choosing the roads in the future in terms of environmental benefits.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.127-136
• /
• 2003

Road safety is defined under the minimum design standard and design examination process is consisted of the standard according to current road design. However, road safety in practical way is correlative to not only all element of roads but also road shape, such as, between straight line and curved line and between curved lines. Also. it is related to alignments such as horizontal alignment and vertical alignment, and cross section. That is, the practical road design should be examined in both sides of 3 dimension and consecutiveness (consistency) as the actual road is a 3 - dimensional successive object. The paper presents a concept for acceleration to evaluate consistency of road considering actual road shape on 3-dimension. Acceleration of vehicle is influential to road consistency based on running state of vehicles and state of drivers. The magnitude of acceleration. especially, is a quite influential element to drivers. Based on above, the acceleration on each point on 3-D road can be calculated and then displacement can be done. Computation of acceleration means total calculation on each axis. Speed profile refers to “Development of a safety evaluation model for highway horizontal alignment based on running speed(Jeong, Jun-Hwa, 2001)” and then acceleration can be calculated by using the speed pronto. According to literature review, definition of acceleration on 3-D and g-g-g diagram are established. For example, as a result of the evaluation, if the acceleration is out of range, the road is out of consistency. The paper shows calculation for change of acceleration on imaginary road under minimum design standard and the change tried to be applied to consistency. However accurate acceleration is not shown because the speed forecasting model is limited and the paper did not consider state of vehicles (suspension, tires and model of vehicles). If speed pronto is defined exactly, acceleration is calculated on all road shapes, such as. compound curve and clothoid curve. and then it is appled to consistency evaluation. Unfortunately, speed forecasting model on 3 -D road and on compound curves have rarely presented. Speed forecasting model and speed profile model need to be established and standard of consistency evaluation need to developed and verified by experimental vehicles.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.247-255
• /
• 2008

According to "A guide Book to Highway Design", most road elements are chosen based on a certain design speed in order to ensure obtaining safe and smooth traffic operating. However, road safety in practical way is corelative to not only all element of roads but also road shape, for example, between straight line and curves line and between curved lines. Also, it is relates to alignments such as horizontal alignment, vertical alignment, and cross section. That is, the practical road design should be examined in both sides of 3 dimension and consecutiveness as the practical road is a 3-dimensional successive object. The paper presents a concept for acceleration to evaluate consistency of road considering actual road shape on 3-dimension. Acceleration of vehicle is influential to road consistency based on running state of vehicle and state of drivers. Especially, the magnitude of acceleration is a quite influential element to drivers. Based on above, the acceleration on each point 3-D road can be calculated and then displacement can be done. Computation of acceleration means total calculation on each axis.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.21-40
• /
• 2003

A traffic accident analysis method was developed and tested based on the highway alignment risk indices using geographic information systems(GIS). Impacts of the highway alignment on traffic accidents have been identified by examining accidents occurred on different alignment conditions and by investigating traffic accident risk indices(TARI). Evaluative criteria are suggested using geometric design elements as an independent variable. Traffic accident rates were forecasted more realistically and objectively by considering the interaction between highway alignment factors and the design consistency. And traffic accident risk indices and risk ratings were suggested based on model estimation results and accident data. Finally, forecasting traffic accident rates, evaluating the level of risk and then visualizing information graphically were combined into one system called risk assessment system by means of GIS. This risk assessment system is expected to play a major role in designing four-lane highways and developing remedies for highway sections susceptible to traffic accidents.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.125-133
• /
• 2008

Achieving consistent geometric design is an important goal in highway design to ensure obtaining safe, economical and smooth traffic operation. Most evaluation of consistency is based on 'speed change' in speed profile. According to literature, the speed depends on geometric elements, speed on tangent section prior to a curve, and background around roads. Especially, the radius is the most main element mentioned in various literature. Therefore, this paper shows two ways of calculating horizontal radius on real road, that is, three-dimensional road. First of all, the radius of horizontal curve is calculated based on physical method. The calculated radius contains not only superelevation but also longitudinal grade while the current minimum radius is calculated by considering superelevation and side friction according to the point-mass equation. Secondly, the problem of composed curves with distorted appearance by overlaying sag or crest vertical alignment has been known. To quantify the extent of distortion effects, the method of calculation of real seen so called 'Perspective Radius' is developed. The paper presents the perspective radius and recommended perspective radius.