• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.79-88
• /
• 2006

In this paper, we designed and implemented ubiquitous u-Health system using RFE and ZigBee. We made a wireless protocol Kit which combines RFE Tag recognition and ZigBee data communication capability. The software is designed and developed on the TinyOS. Wireless communication technologies which hold multi-protocol stacks with RFID and result in the wireless ubiquitous world could be Bluetooth, ZigBee, 802.11x WLAN and so on. The environments that the suggested u-Health system may be used is un-manned nursing, which would be utilized in dense sensor networks such as a hospital. The the size of devices with RFID and ZigBee will be so smaller and smaller as a bracelet, a wrist watch and a ring. The combined wireless RFID-ZigBee system could be applied to applications which requires some actions corresponding to the collected (or sensed) information in WBAN(Wireless Body Area Network) and/or WPAN(Wireless Person Area Network). The proposed ubiquitous u-Health system displays some text-type alert message on LCD which is attached to the system or gives voice alert message to the adequate node users. RFE will be used as various combinations with other wireless technologies for some application-specific purposes.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.3
• /
• pp.27-33
• /
• 2010

The goal for the CD&R system is to predict that a conflict is going to occur in the future, communicate the detected conflict to a human operator, and, in some cases, assist in the resolution of the conflict situation. To provide insight into different methods of conflict detection and resolution, a literature review of previous research models and current developmental and operational systems was performed. This paper focuses only on the specific attributes of each model, not on the depth to which a model has been analyzed, validated, or accepted. Thus, care should be taken to remember that a model that seems to be simple according to our categorization scheme may be significantly more viable than an apparently sophisticated model.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.235-238
• /
• 1998

This paper presents the detection of internal combustion engine's multiple misfire. The primary cause of air pollution by vehicles is imperfect conbustion of fuel. The CARB(California Air Resources Board) have imposed regulations for the detection of misfiring in automotive engines. The OBD-II regulations requir that misfire should be monitored by the diagnostic system, and that the goal of OBD-II is to alert the driver to the presence of a malfunction of the emission control system. Present invention based upon measurements of engine roughness as derived from crankshaft angular velocity measurements with special signal processing method. Crankshaft angular velocity signals are processed by walsh-fourier transform. Experimental work confims that it's possible to apply walsh-fourier transform for the detection of multiple misfires in no-load idle and road testing.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2457-2460
• /
• 2004

As the usage of electron electricity is rapidly increasing, corresponding accidents also take place proportionately. Although various losses occur very often because of senility of system and maintenance, only a earth leakage current breaker by a leakage current alert is used. That means it is always fraught with dander. This paper, we propose to measure and cut a leakage current and method of taking a measurement current short circuit. Besides, through keeping watch communication with server, prevent electric loss and mishap in advance.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.349-350
• /
• 2015

Traditional power tunnel monitoring and diagnosis system provides simple alert in accordance with limits which set by operator using various field installed various sensor measurements. System's algorithm is too simple and it has uncertainty of sensor with error. In this paper, proposed algorithm give operator verification using installed sensor measurements such as environmental sensors for fire prevention because of cable overheat in the power tunnel.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.1
• /
• pp.23-27
• /
• 2006

As a pervasive healthcare application to help medication of elderly patients, the smart compliance monitors have been recently proposed. In this paper, we present a new smart drug/medicine pack (SDP) for ubiquitous medication monitoring, for which the packaging is either paper packet or blister pack. This ubiquitous compliance monitor is composed of several SDPs and a Bluetooth equipped PDA phone. The SDP is a wireless module that monitors the medication consumption unobtrusively by transmitting the sensed data of 'drug removal' events to the medical center and by reminding patients when they take a dose on their mobile phone. The communication between SDP modules and PDA is realized via Bluetooth. The PDA is basically embedded to indicate the medication record and to alert every prescribed medication time during treatment. Experimental results show that the proposed system works exactly when the SDPs are far within about 2 [m] from PDA.

• Journal of Communications and Networks
• /
• v.17 no.2
• /
• pp.118-125
• /
• 2015

In this paper, we propose a method to reduce mobile social network services (SNSs) traffic using a mobile integrated SNS gateway (MISG) to improve network communication performance between the mobile client and SNS servers. The gateway connects the client and SNS servers using the contents adapter and the web service adapter and helps to improve communication performance using its cache engine. An integrated SNS application, the user's client, communicates with the gateway server using integrated SNS protocol. In addition, the gateway can alert the client to new SNS contents because of the broker server implemented by the message queuing telemetry transport protocol. We design and develop the modules of the gateway server and the integrated SNS application. We then measure the performance of MISG in terms of content response time and describe the result of the experiment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.235-237
• /
• 2017

We suggest a way to improve the performance of a target distance estimation algorithm using Kalman Filter to compensate for the error that occurs when the target track information over the Combat Radio Network is lost.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.06a
• /
• pp.208-211
• /
• 2019

뉴스, 광고, 도서에 이르는 디지털 정보들은 멀티미디어 기술로 진화하고 있다. 하지만 재난 상황에서 신속히 전달되는 재난 경보는 아직까지 멀티미디어 기술이 거의 적용되지 않았다. 이미 사람의 대응 행동을 유발하는 재난상황에서 효과적인 경보를 위한 멀티미디어 기술의 선행 연구가 있다. 본 연구는 2016년 경주지진, 2017년 포항지진 상황을 유사하게 가정하여 모바일 재난경보에서 멀티미디어 기술을 접목하는 방안을 도출하였다. 제작된 시나리오는 적용 가능한 멀티미디어 기술 중에서 국내에도 필요한 기능을 중심으로 기술 구현 가능성을 고려하여 6가지 멀티미디어 기술을 적용하였다. 본 논문에 기술은 기존의 재난문자방송과 대비하여 도입이 필요한 6가지 멀티미디어 기술의 차별적 특징을 담고 있다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.06a
• /
• pp.280-281
• /
• 2018

2017년 UHD 본방송을 시작한 후 ESG, TIVIVA와 같은 부가서비스들이 지속적으로 도입되고 있다. 최근에 UHD 재난경보방송 도입 논의가 시작되었고, 서비스 방향을 TV에서 공공미디어로 확대하는 방안에 논의가 이어지고 있다. 재난경보방송의 대상이 TV가 아닌 다른 유형의 수신기들로 달라지면 서비스 시나리오도 달라진다. 기존의 아날로그 TV재난방송은 TV 화면에 자막으로 재난 문자가 표출되었고, DMB 재난경보방송은 내비게이션에서 알람음을 동반한 팝업창에 문자 메시지 형태로 표출되었다. UHD 재난경보방송 서비스가 공공미디어로 확장되기 위해서 역시 새로운 서비스에 관련한 다양한 연구가 요구된다. 이에 본 논문은 공공미디어를 통한 UHD 재난경보방송의 서비스 요구사항에 있어 3가지 연구 과제를 점화하고 있다. 우선 기존과 다른 재난 정보전달 서비스인 만큼 공공미디어를 통한 재난경보방송의 서비스 성격 정립이 필요하다. 그리고 공공미디어 수신 환경에 적합한 다양한 메시지 형식이 연구되어야 한다. 마지막으로 공공미디어를 통한 재난경보방송 시스템과 솔루션의 원격 관리 방안을 모색하고자 한다.