• 한국세라믹학회지
• /
• 제36권7호
• /
• pp.734-741
• /
• 1999

Al2O3와 t-ZrO2 분말의 압분체를 공기중 150$0^{\circ}C$ 및 1$600^{\circ}C$에서 2시간 소결하여 제조된 입자복합체의 미세구조와 기계적 성질을 조사하였다. 소수의 미세한 구상의 ZrO2입자는 Al2O3의 입내에 존재하였으나 대분분은 입계에 존재하여 Al2O3의 입계를 고정시키는 것이 가능하였고, 따라서 Al2O3의 입성장을 둔화시켰다. 소결할 동안 입계 ZrO2 입자의 조대회는 응집된 ZrO2 입자내에서의 입계의 소멸과 Al2P3 입계의 이동에 의해서 끌어 당겨진 ZrO2 입자의 합체(coalescence)에 의해서 일어날 수 있었다. ZrO2의 첨가에 의한 Al2O3의 기계적 성질의 변화는 기지상인 Al2O3의 미세구조와 분산된 ZrO2 입자의 크기와 구조에 의존하였다.

• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.423-437
• /
• 1989

Al2O3/ZrO2 composites were prepared by precipitation method using Al2(SO4)3.18H2O, ZrOCl2.8H2O and YCl3.6H2O as starting materials and NH4OH as a precipitation agent. Al2O3/ZrO2 composites(series A) were prepared by mixing Al2O3 powder obtained by single precipitation method with ZrO2(＋3m/o Y2O3) powder obtained by co-predipitation method. Al2O3/ZrO2 composites (series B) were prepared by co-precipitation method using the three starting materials. In all cases, the composition was controlled as Al2O3-15v/o ZrO2(＋3m/o Y2O3). The composites of series A showed higher final relative densities than those of series B and tetagonal ZrO2 in all cases was retained to about 95% at room temperature. ZrO2 particles were coalesced more rapidly in grain boundary of Al2O3 than within Al2O3 grain. ZrO2 particles were located at 3-and 4-grain junction of Al2O3 and limited the grain growth of Al2O3. It was observed that MgO contributed to densification of Al2O3 but limited grain growth of Al2O3 by MgO was not remarkable. In all Al2O3/ZrO2 composites, exaggerated grain growth of Al2O3 was not observed and Al2O3/ZrO2 composites were found to have homogeneous microstructures.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.573-580
• /
• 1998

MgO와 Al 분말을 자전고온연소합성법으로 $MgAl_2O_4$ 스피넬 상을 합성하였다. MgO 와 Al을 테르밋 반응으로 생성하였으며, 가열반응생성으로 $800^{\circ}C$ 예열온도에서 반응시켰다. DTA/TG, 합성생성물, 최고온도 공정조건에 대해 연구하였고, MgO와 Al은 MgO+2Al+ 3/$2O_3$ $\rightarrow$ $MgAl_2O_4$ 로 합성되었다. 미반응된 재료로부터 MgAl2O4 스피넬의 활성화 에너지는 -264.8kcal/mol의 발생열량과 5634K의 최고 반응온도로 계산되었다. 테르밋 반응후의 시험편의 체적느 6% 증가하였다.

• 한국분말재료학회지
• /
• 제10권2호
• /
• pp.97-102
• /
• 2003

The powder-in sheath rolling was applied to the fabrication of $Al/Al_2O_3$ composite. A stainless steel tube with outer diameter of 12 mm and wall thickness of 1 mm was used as a sheath. Mixture of aluminum powder and $Al/Al_2O_3$ particles of which volume content was varied from 5 to 20 vol.% was filled in the tube by tap filling and then rolled to 75% reduction at ambient temperature. The re]]ed specimen was sintered at 56$0^{\circ}C$ for 0.5 hr. The $Al/Al_2O_3$ composite fabricated by the sheath rolling and subsequent sintering showed the relative density higher than 0.96. The tensile strength of the composite increased with the volume content of $Al_2O_3$ particles, and it reached a maximum of 90 MPa which is 1.5 times higher than unreinforced material. The elongation decreased with the volume content of $Al_2O_3$ particles. It is concluded that the powder-in sheath rolling is an effective method for fabrication of $Al/Al_2O_3$ composite.

• 한국재료학회지
• /
• 제11권12호
• /
• pp.1080-1085
• /
• 2001

Dielectric properties and leakage current characteristics of 100 nm-thick $Ta_2O_5/Al_2O_3$multilayer thin films, which were fabricated by reactive sputtering of$Al_2O_3$and$Ta_2O_5$ successively on top of each other for total 9 layers, have been investigated with variation of the$Al_2O_3$content$(i.e,\;Ta_2O_5/Al_2O_3 \;thickness\;ratio)$.$Ta_2O_5/Al_2O_3$films were amorphous regardless of the$Al_2O_3$content. With increasing the$Al_2O_3$content from 0% to 100%, refractive index of the $Ta_2O_5/Al_2O_3$films decreased linearly from 2.03 to 1.56 and dielectric constant was lowered from 23.9 to 7.7 Variation of the dielectric constant with the$Al_2O_3$content was in good agreement with the behavior that was obtained by assuming parallel capacitors of$Al_2O_3$and Ta_2O_5$. Leakage current characteristics of $Ta_2O_5/Al_2O_3$ multilayer films were superior to those of $Ta_2O_5$ and$Al_2O_3$films. $Ta_2O_5/Al_2O_3$ films of 5% and 10%$Al_2O_3$content exhibited excellent leakage current densities which were lower than $10^{-7} A/cm^2$ at 1MV/cm.

• 한국재료학회지
• /
• 제29권8호
• /
• pp.463-468
• /
• 2019

The electrical and interfacial properties of $HfO_2/Al_2O_3$ and $Al_2O_3/HfO_2$ dielectrics on AlN/p-Ge interface prepared by thermal atomic layer deposition are investigated by capacitance-voltage(C-V) and current-voltage(I-V) measurements. In the C-V measurements, humps related to mid-gap states are observed when the ac frequency is below 100 kHz, revealing lower mid-gap states for the $HfO_2/Al_2O_3$ sample. Higher frequency dispersion in the inversion region is observed for the $Al_2O_3/HfO_2$ sample, indicating the presence of slow interface states A higher interface trap density calculated from the high-low frequency method is observed for the $Al_2O_3/HfO_2$ sample. The parallel conductance method, applied to the accumulation region, shows border traps at 0.3~0.32 eV for the $Al_2O_3/HfO_2$ sample, which are not observed for the $Al_2O_3/HfO_2$ sample. I-V measurements show a reduction of leakage current of about three orders of magnitude for the $HfO_2/Al_2O_3$ sample. Using the Fowler-Nordheim emission, the barrier height is calculated and found to be about 1.08 eV for the $HfO_2/Al_2O_3$ sample. Based on these results, it is suggested that $HfO_2/Al_2O_3$ is a better dielectric stack than $Al_2O_3/HfO_2$ on AlN/p-Ge interface.

• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1266-1273
• /
• 1998

Al2O3/(5~20vol%)LaAl11O18 composites in which the second phase was dispersed with a elongated grain shape were fabricated using Al2O3 and La2O3 composition by hot-pressing. In order investigate the in-fluence of LaAl11O18 on the toughening of LaAl11O18 on the toughening of Al2O3 matrix composites AE(acoustic emission) analysis was con-ducted together with an evaluation of fracture toughness using of SEPB technique. The degree of AE events occurred in composites were more than those in monolithic alumina. The occurrences of AE event increased with increasing the amount of LaAl11O18 phase in the Al2O3/LaAl11O18 composite is two times higher compared to monolithic alu-mina. The main toughening mechanism was attributed to the bridging of LaAl11O18 grains at tip of pro-pagating crack.

• 연구논문집
• /
• 통권26호
• /
• pp.103-112
• /
• 1996

$Al_2O_3/SiC$ Hybrid-Composite이 일반적인 분말공정에 의하여 제조되었다. 소결시 $\gamma-Al_2O_3에서 $\alpha-Al_2O_3$로의 전이에 seed역할을 하는 $\alpha-Al_2O_3의 첨가는 균일한 미세구조를 발달시켜 강도의 증진을 가져왔다. nano size의 SiC의 첨가는 $Al_2O_3$의 소결성과 입성장에 영향을 미쳐 파괴강도의 증진을 가져왔다. $Al_2O_3/SiC$ nano-Composite에 SiC plates의 첨가는 파괴강도의 감소를 가져왔지만, 상대적으로 파괴인성은 증진되었다. SiC plates에 nitride (BN, $Si_3N_4$ 코팅을 할 경우 crack deflection을 더욱 유발하여 파괴인성이 증진되었다.

• 한국세라믹학회지
• /
• 제38권5호
• /
• pp.412-417
• /
• 2001

본 연구는 습식법으로 수산화 알루미늄과 티타니아를 출발물질로 하여 $Al_2$O$_3$-TiO$_2$복합분체를 제조하였으며, 2 mol의 Al(OH)$_3$분말에 대하여 TiO$_2$분말량을 1, 3, 5, 7, 9, 11 wt%로 첨가하여 $Al_2$O$_3$-TiO$_2$복합분체의 특성을 조사하였다. 제조된 $Al_2$O$_3$-TiO$_2$계 복합분체는 $700^{\circ}C$~140$0^{\circ}C$까지 하소하여 XRD 분석을 한 결과 100$0^{\circ}C$까지는 TiO$_2$(rutile)상과 η-Al$_2$O$_3$상이 공존하다가 110$0^{\circ}C$부터 130$0^{\circ}C$까지는 η-Al$_2$O$_3$에서 $\alpha$-Al$_2$O$_3$로의 상전이가 일어나서 $\alpha$-Al$_2$O$_3$상과 TiO$_2$(rutile)상이 나타났으며 하소온도 140$0^{\circ}C$, TiO$_2$첨가량이 5 wt%일 때부터 $Al_2$TiO$_{5}$가 생성되기 시작하였다. TiO$_2$첨가량에 따른 비표면적값은 첨가량이 7 wt%까지는 감소하였으나 그 이상 첨가시 증가하였다. 입도분석 결과 평균입경은 15.74~23.21$mu extrm{m}$로서 TiO$_2$첨가량이 3 wt%일 때 가장 작은 값을 가졌으며 TiO$_2$첨가량은 5 wt% 이상부터 점차 감소하였다.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.100-108
• /
• 1989

Aluminum hydroxides were prepared by the alkoxide hydrolysis method using Al-isopropoxide as a starting material and NH4OH as a catalytic agent. When Al-isopropoxide was hydrolyzed in a H2O-NH3 system, only Al(OH)3 was obtained over all pH values. However, AlOOH was formed besides Al(OH)3 when Al-isopropoxide was hydrolyzed in a H2O-NH3-isopropyl alcohol system. The AlOOH/Al(OH)3 ratio was increased as the isopropyl alcohol content was increased. The hydroxides, Al(OH)3 and AlOOH, obtained in this study and the commerical products, $\alpha$-Al2O3 and AlOOH were subjected to the carbothermal reduction and nitridation reaction to product AlN powder, using carbon black as a reducing agent under N2 atmosphere at various temperatures. AlN was synthesized from the obtained Al(OH)3 and the commercial AlOOH at 145$0^{\circ}C$, however, synthesized from the obtained AlOOH and the commercial alpha-alumina at 135$0^{\circ}C$. The temperature difference is assumed to be attributed to the reactivity of those powders. AlN powder prepared from the Al-isopropoxide was observed to have the narrower particle size distribution than that prepared from the commercial $\alpha$-Al2O3 or AlOOH.