• 한국세라믹학회지
• /
• 제37권4호
• /
• pp.314-319
• /
• 2000

Microstructueral development and electrical properties in ZnO-Bi2O3-ZnAl2O4 system were investigated with ZnAl2O4 content(0.1~1.0 mol%). The shrinakge of specimens started around $700^{\circ}C$ and finished at 110$0^{\circ}C$, reaching a maximum shrinkage rate at 80$0^{\circ}C$. The shrinkage rate is strongly related to the fromation of a Bi-rich liquid. The increase of the ZnAl2O4 content inhibited the grain growth of ZnO. Most of ZnAl2O4 particles located at the grain boundaries were about 2~3${\mu}{\textrm}{m}$. ZnO grain size changed little up to 110$0^{\circ}C$, but increased markedly above 115$0^{\circ}C$, especially at lower ZnAl2O4 content. Drastic decreasing in breakdown voltage(Vb) with increasing temperature is expected to be dependent on the ZnO grain size and the distribution of the largest grains between the electrode. The nonlinear I-V characteristic was significantly influenced by the ZnAl2O4 content, which exhibited a maximum value at about 15${\mu}{\textrm}{m}$ of ZnO grain size.

• 한국결정성장학회지
• /
• 제18권2호
• /
• pp.68-71
• /
• 2008

승화법에 의하여 AlN 결정을 성장하였다. 성장된 결정의 상은 미세한 단결정상이 응집된 다결정상이었으며, 약 2${\sim}$3mm의 길이와 직경 1인치의 크기로 증착되어진 성상을 얻었다. 성장된 결정의 표면에 탄소의 흡착이 관찰되었으며, 광학현미경과 SEM을 통하여 AlN 결정의 성장 거동에 대하여 고찰하여 보았다.

• 한국의학물리학회지:의학물리
• /
• 제5권2호
• /
• pp.3-12
• /
• 1994

$Na^{+}$ 이온을 주입시킨 후, $^{17}$ Cs 감마선으로 조사된 $Al_2$O$_3$ 및, $Na^{+}$ 이 주입된 $Al_2$O$_3$의 열자극 발광을 340K～620K의 온도 구간에서 측정하였다. $Na^{+}$ 이온을 주입시킨 후, $^{137}$Cs 감마선으로 조사된 $Al_2$O$_3$의 열자극 발광 곡선은 415K, 452K, 508K, 및 568K에서 TL peak를 가지는 곡선으로 분해되었다. $Na^{+}$ 이온 주입 후 $^{137}$Cs 감마선 조사된 $Al_2$O$_3$는, $Na^{+}$ 이온만 주입된 $Al_2$O$_3$와 $^{137}$Cs 감마선 만 조사된 $Al_2$O$_3$보다 각각 defect traps에 구속된 전하운반체의 밀도와 defect traps의 밀도가 증강되었기 때문에, $Na^{+}$ 이온 주입 후 $^{137}$Cs 감마선 조사된 $Al_2$O$_3$보다 각각 20배, 5배 증가되었다. 주입 이온 선량과 에너지의 증가는 defect trap 밀도의 증가를 초래함으로, 이온 주입된 시료의 열자극 발광 세기는 이온의 선량과 에너지에 의존함을 알았다. 입사 이온의 질량이 증가함에 따라 열자극 발광 세기는 기하급수적으로 급격히 감소하였고, 이것은 열자극 발광 세기가 결함 생성률 뿐만 아니라, 이온의 주입 깊이에도 밀접한 관계가 있음을 보여주었다.

• 한국재료학회지
• /
• 제22권2호
• /
• pp.97-102
• /
• 2012

The microstructure and tensile properties of Al-Mn/Al-Si hybrid aluminum alloys prepared by electromagnetic duocasting were investigated. Only the Al-Mn alloy showed the typical cast microstructure of columnar and equiaxed crystals. The primary dendrites and eutectic structure were clearly observed in the Al-Si alloy. There existed a macro-interface of Al-Mn/Al-Si alloys in the hybrid aluminum alloys. The macro-interface was well bonded, and the growth of primary dendrites in Al-Si alloy occurred from the macro-interface. The Al-Mn/Al-Si hybrid aluminum alloys with a well-bonded macro-interface showed excellent tensile strength and 0.2% proof stress, both of which are comparable to those values for binary Al-Mn alloy, indicating that the strength is preferentially dominated by the deformation of the Al-Mn alloy side. However, the degree of elongation was between that of binary Al-Mn and Al-Si alloys. The Al-Mn/Al-Si hybrid aluminum alloys were fractured on the Al-Mn alloy side. This was considered to have resulted from the limited deformation in the Al-Mn alloy side, which led to relatively low elongation compared to the binary Al-Mn alloy.

• 한국세라믹학회지
• /
• 제33권10호
• /
• pp.1147-1155
• /
• 1996

• The Korean Journal of Ceramics
• /
• 제1권3호
• /
• pp.147-151
• /
• 1995

Porous composite of $Al_2O_3$ and AIN based mullite and SiC can be prepared by alumium reaction synthesis and atmosphere controllied sintering in order to improve the durability of a gas filter body. The porous $Al_2O_3$-AIN-mullite, which has a strength of 168 kg/$\textrm{cm}^2$ and porosity of 51.59%, could be obtained by stmospheric firing at $1600^{\circ}C$ and the porous $Al_2O_3$-AIN-SiC with a porosity of 33% and strength of 977 kg/$\textrm{cm}^2$, could also be prepared. The average pore size has been changed from 0.2$\mu\textrm{m}$ in a reduction atmosphere and to 2$\mu\textrm{m}$ in an air atmosphere, respectively.

• 한국세라믹학회지
• /
• 제23권2호
• /
• pp.38-42
• /
• 1986

The adsorption behavior of 3CaO.$Al_2O_3$-sodium gluconate-$H_2O$ system by measuring adsorp-tion isotherm DTA and IR sepctra. The adsorbed amount of sodium gluconate on 3CaO.$Al_2O_3$ is exceedingly larger than 3CaO.$SiO_2$ and portland cement. From the DAT experiment the formation of complex is observed by the characteristic exothermic peak of the complex at 45$0^{\circ}C$ It is now strong deduced that the chemical bonding between gluconate anion and 3CaO.$Al_2O_3$ should be coordinative due to the complex formation on the surface 3CaO.$Al_2O_3$ from the IR spectra of sod-ium gluconate only and 3CaO.$Al_2O_3$ -sodium gluconate-$H_2O$.

• 한국세라믹학회지
• /
• 제38권1호
• /
• pp.56-60
• /
• 2001

90.24 mol% ZrO$_2$-5.31 mol% $Y_2$O$_3$-4.45 mol% Nb$_2$O$_{5}$ 조성의 (Y,Nb)-TZP와 (Y,Nb)-TZP/Al$_2$O$_3$복합체를 155$0^{\circ}C$~1$600^{\circ}C$에서 1~2시간 소결하여 제조하였다. 시편의 결함에 대한 저항성을 조사하기 위하여 R-curve, Weibull modulus, slow crack growth 변수 등을 조사하였다. 실험결과, (Y,Nb)-TZP와 (Y,Nb)-TZP/Al$_2$O$_3$복합체 모두 상용 3Y-TZP 보다 우수한 결함 저항성이 관찰되었다. (Y,Nb)-TZP/Al$_2$O$_3$복합체의 결함 저항성은 $Al_2$O$_3$첨가에 의한 결정립 가교 인화, 분산강화, R-curve 효과에 의한 것으로 추정된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.95-96
• /
• 2000

The effect of $Al_2O_3$ on the dielectric constant and the coefficient of thermal expansion of lead borosilicate glasses for the application of PDP glass paste was investigated. Measurements were made theoretically by using empirical equations on the composition of the of glasses in which the $PbO/Al_2O_3$, $B_2O_3/Al_2O_3$ and $SiO_2/Al_2O_3$ ratios were systematically varied. As a result, with increasing $PbO/Al_2O_3$ the thermal expansion coefficient and the dielectric constant noticeably increased, while the change of $B_2O_3/Al_2O_3$ and $SiO_2/Al_2O_3$ ratios did not affect those properties of the glasses.

• 한국재료학회지
• /
• 제29권12호
• /
• pp.757-763
• /
• 2019

A stacked high-voltage (900 V) Al electrolytic capacitor made with ZrO₂ coated anode foils, which has not been studied so far, is realized and the effects of Zr-Al-O composite layer on the electric properties are discussed. Etched Al foils coated with ZrO₂ sol are anodized in 2-methyl-1,3-propanediol (MPD)-boric acid electrolyte. The anodized Al foils are assembled with stacked structure to prepare the capacitor. The capacitance and dissipation factor of the capacitor with ZrO₂ coated anode foils increase by 41 % and decrease by 50 %, respectively, in comparison with those of Al anode foils. Zr-Al-O composite dielectric layer is formed between separate crystalline ZrO₂ with high dielectric constant and amorphous Al₂O₃ with high ionic resistivity. This work suggests that the formation of a composite layer by coating valve metal oxide on etched Al foil surface and anodizing it in MPD-boric acid electrolyte is a promising approach for high voltage and volume efficiency of capacitors.