• 한국세라믹학회지
• /
• 제28권4호
• /
• pp.338-346
• /
• 1991

The alumina-titania composite powders coated with Al2O3 were prepared by the method of hydrolysis-deposition of mixed aluminium salt solution of Al2(SO)4-Al(NO3)3-Urea. The effects of coating-process parameters on the characteristics of coated composite powders were also investigated. As the content of TiO2 dispersed in deionized water increased, the coated composite powders were found to be more uniform in size and unagglomerated. When TiO2 powders were coated for 30 min, the optimum TiO2 content in the coating process was 400 mg/ι. The size of TiO2 particle was increased approximately from 0.7${\mu}{\textrm}{m}$ to 1.0${\mu}{\textrm}{m}$ through coating of Al2O3. The IEP of coated composite powders was pH=8.3 identical to the value of aluminium hydroxides and the zeta-potential showed nearly similar values each other. When heat treating coated composite powders at 130$0^{\circ}C$, only two phases of TiO2(rutile) and Al2TiO5 were observed. These results showed that the suface of TiO2 could be uniformly coated with the aluminium hydroxide.

• 한국결정성장학회지
• /
• 제11권4호
• /
• pp.170-175
• /
• 2001

It was possible to grow the $Al_{2}O_{3}$ based $Y_{3}A_{5}O_{12}(YAG),ZrO_{2}$ binary and ternary eutectic fibers using micro-pulling down method with a growing rate of 0.1~15 mm/min. While $Al_{2}O_{3}/ZrO_{2}$ showed cellular-lamellar structure, $Al_{2}O_{3}$/YAG and $Al_{2}O_{3}$/YAG/$ZrO_{2}$ternary eutectic fibers showed homogeneous Chinese script lamellar structures. The microstructures of $Al_{2}O_{3}/ZrO_{2}$ binary eutectic fibers changed with solidification rate from lamellar pattern to cellular structure. The interlamellar spacing agreed with the inverse-square-root dependance on pulling rate according to $\lambda$=$kv_p\;{-1/2}$. $Al_{2}O_{3}/ZrO_{2}$ binary eutectic fibers recorded the highest tensile strength of about 1560MPa at room temperature. $Al_2O_3/YAG/ZrO_2$ternary eutectic fiber showed excellent thermal stability to $1200^{\circ}C$ without significant decrease. The maximum strength of ternary eutectic fibers recorded were 1100MPa at $25^{\circ}C$ and 970MPa at $1200^{\circ}C$, respectively.

• 한국재료학회지
• /
• 제28권5호
• /
• pp.268-272
• /
• 2018

An $Al_2O_3/AlN$ bilayer deposited on GaN by atomic layer deposition (ALD) is employed to prepare $Al_2O_3/AlN/GaN$ metal-insulator-semiconductor (MIS) diodes, and their interfacial properties are investigated using X-ray photoelectron spectroscopy (XPS) with sputter etch treatment and current-voltage (I-V) measurements. XPS analyses reveal that the native oxides on the GaN surface are reduced significantly during the early ALD stage, indicating that AlN deposition effectively clelans up the GaN surface. In addition, the suppression of Al-OH bonds is observed through the ALD process. This result may be related to the improved device performance because Al-OH bonds act as interface defects. Finally, temperature dependent I-V analyses show that the barrier height increases and the ideality factor decreases with an increase in temperature, which is associated with the barrier inhomogeneity. A Modified Richardson plot produces the Richardson constant of $A^{**}$ as $30.45Acm^{-2}K^{-2}$, which is similar to the theoretical value of $26.4Acm^{-2}K^{-2}$ for n-GaN. This indicates that the barrier inhomogeneity appropriately explains the forward current transport across the $Au/Al_2O_3/AlN/GaN$ interface.

• 공업화학
• /
• 제8권5호
• /
• pp.844-852
• /
• 1997

균일계 티타늄 촉매를 이용한 결정성 폴리에틸렌 왁스의 중합에서 중합온도, 중합 시간, 공촉매, 수소분압, 공단량체 등의 중합인자가 촉매성능과 폴리에틸렌 왁스의 물성(분자량, 분자량 분포, 밀도, 결정화도 등)에 미치는 영향을 조사하였다. $(C_2H_5)_3Al$, $(i-C_4H_9)_3Al$, $(C_2H_5)_2AlCl$, $(C_2H_5)_3Al_2Cl_3$을 사용하여 공촉매의 영향을 조사한 결과 $(C_2H_5)_3Al/(C_2H_5)_3Al_2Cl_3$의 혼합 공촉매계가 가장 효과적이었다. 중합시간, 중합온도, 수소분압은 촉매의 활성과 생성 폴리에틸렌 왁스의 물성에 영향을 주고, 이러한 중합인자의 조합에 의해 다양한 물성을 갖는 결정성 폴리에틸렌 왁스를 얻을 수 있음을 확인할 수 있었다. 또한 부텐-1과의 공중합에 의해 0.91 g/cc까지의 저밀도형 왁스를 얻을 수 있었다.

• 한국재료학회지
• /
• 제12권6호
• /
• pp.493-498
• /
• 2002

$Al_2O_3$ is a promising gate dielectric because of its high dielectric constant, high resistivity and low leakage current. Since $OH^-$ radical in $Al_2O_3$ films deposited by ALD using TMA and $H_2O$ degrades the good properties of $Al_2O_3$, TMA and $O_3$ were used to deposite $Al_2O_3$ films and the effects of $O_3$ on the properties of the $Al_2O_3$ films were investigated. The growth rate of the $Al_2O_3$ film under the optimum condition was 0.85 $\AA$/cycle. According to the XPS analysis results the $OH^-$ concentration in the $Al_2O_3$ film deposited using $O_3$ is lower than that using $H_2O$. RBS analysis results indicate the chemical formula of the film is $Al_{2.2}O_{2.8}$. The carbon concentration in the film detected by AES is under 1 at%. SEM observation confirms that the step coverage of the $Al_2O_3$ film deposited by ALD using $O_3$ is nearly 100%.

• 대한환경공학회지
• /
• 제37권6호
• /
• pp.325-331
• /
• 2015

낙동강 하류부의 상수원수를 대상으로 Al(III)염과 Fe(III)염계 응집제를 이용한 응집제의 특성 실험 결과, alum과 $FeCl_3$의 경우는 모노머성 화학종이 각각 98%와 93.3%로 응집제내에 함유된 주된 가수분해종은 모노머성 화학종임을 알 수 있었다. 염기를 첨가하여 제조한 염기 첨가비 r=1.2인 PACl의 경우 폴리머성 Al(III)종은 31.2%이었으며, r=2.2인 PACl의 경우 함유된 폴리머성 Al(III)종은 85.0%로 r 값이 증가함에 따라 더 많은 폴리머성 Al(III)종이 함유되어 있는 것으로 나타났다. 응집제별 응집실험 결과, 원수의 탁도가 높고 낮음에 관계없이 응집제별 탁도 및 유기물 제거정도는 $FeCl_3$ > PACl (r=2.2) > PACl(r=1.2) > alum의 순으로 나타났다. Al(III)계 응집제 보다 $FeCl_3$의 경우 응집효율이 우수한 것으로 나타났다. 그리고 Al(III)계 응집제의 경우 염기도가 높은 응집제의 경우 polymeric Al(III)종을 많이 함유함에 따라 응집효율이 향상됨에 따라 염기도가 높은 응집제일수록 응집효율이 높은 것으로 나타났다. 실험에 적용된 응집 pH 범위(pH 4.0~9.5)에서 모든 응집제의 최적 응집 pH는 약 7.0으로 나타났다. 특히 고염기도 PACl (r=2.2)과 $FeCl_3$의 경우 pH 7.0 이상에서도 높은 탁도 응집효율을 유지하였다. 따라서 pH가 높은 상수원수의 경우 탁도 제거에서는 고염기도 PACl이나 $FeCl_3$ 응집제가 더 적합한 것으로 판단된다.

• 한국표면공학회지
• /
• 제34권2호
• /
• pp.105-114
• /
• 2001

$Al_2$$O_3$ coatings were deposited on M2 high speed steels by the plasma enhanced chemical vapor deposition (PECVD) process, using a gas mixture of AlC1$_3$, $H_2$, $CO_2$ and Ar $Al_2$$O_3$ coatings had interference color and showed amorphous phase. $A1_2$X$A1_3$/($Ti_{0.5}$ /$Al_{0.5}$ )N double layer coatings were produced in the sequence of substrate $NH_3$ plasma pretreatment, ($Ti_{0.5}$$Al_{0.5}$)N depoition process, $Al_2$$O_3$ deposition process. $Al_2$ $O_3$/( $Ti_{0.5}$A $l_{0.5}$)N double layer coatings showed NaCl structure in ( $Ti_{0.5}$A $l_{0.5}$)N layer and amorphous phase in A1$_2$ $O_3$ layer. It was shown that $Al_2$ $O_3$ columns continuously grew onto ( $Ti_{0.5}$A $l_{0.5}$)N columns. ( $Ti_{0.5}$A $l_{0.5}$)N single coating and $Al_2$ $O_3$/( $Ti_{0.5}$A $l_{0.5}$)N double layer coating were oxidized at $700^{\circ}C$, 80$0^{\circ}C$, 90$0^{\circ}C$ for 1hr, 3hr in atmosphere. At 80$0^{\circ}C$, single layer coatings were oxidized, which were examined substrate oxide particle. But $Al_2$ $O_3$/ ( $Ti_{0.5}$A $l_{0.5}$)N double layer coatings maintained the asdeposited state. Therefore, $Al_2$ $O_3$/ ( $Ti_{0.5}$A $l_{0.5}$)N double layer coatings have moreexcellent oxidation resistance than ( $Ti_{0.5}$A $l_{0.5}$)N single layer coatings.X> 0.5/)N single layer coatings.s.

• 한국세라믹학회지
• /
• 제22권6호
• /
• pp.42-52
• /
• 1985

Several $Al_2O_3$-based polycrystalline which had different dopant ratio in the range of 0.5mol% were prepared by doping pure $Cr_2O_3$ $HfO_2$. Single crystalline which had same composition with above polycrystalline were made by means of floating zone method. This study examined the role of each dopant for enhancing the mechanical properties of $Al_2O_3$-based Ceramics. Optical micrographs $({ imes}200)$ of $Al_2O_3-Cr_2O_3$ single crystal showing not only radial crack (rc) on the specimen surface but median crack(mc) and lateral crack(lc) under surface at the edge of indentation mark. Fracture toughness of Al2O3-based Ceramics was increased with $ZrO_2$ content. Alloying effect of $Cr_2O_3$ contributed to the hardness of $Al_2O_3$ based ceramics.

• 열처리공학회지
• /
• 제9권3호
• /
• pp.219-227
• /
• 1996

The purpose of this research is to develop the technology for the synthesis of (Ti,Al)N powder, which shows simultaneously the excellent properties of TiN and AlN, from the Ti-Al intermetallic compounds by the direct nitriding method. The effects of variables such as temperature, Ti-Al intermetallic compounds ($TiAl_3$, TiAl and $Ti_3Al$) were investigated by TG, XRD and SEM. The (Ti,Al)N powder can be easily synthesized from the intermetallic compounds by the direct nitriding method. Among the intermetallic compounds, the nitriding behavior increased with TiAl> $Ti_3Al$ > $TiAl_3$, as the difference of diffusion coefficient for nitrogen in each materials. The ternary nitride such as $Ti_2AlN$ and $Ti_3Al_2N_2$ can be synthesized by the direct nitriding method, although the ternary nitride coexist with TiN and AlN. The ternary nitrides are stable below $1400^{\circ}C$, but these are gradually decomposed into TiN and AlN above $1400^{\circ}C$.

• 한국세라믹학회지
• /
• 제37권4호
• /
• pp.359-367
• /
• 2000

Particulate composites of Al2O3/SiC, Al2O3/ZrO2 and Al2O3/ZrO2/SiC have been fabricated to investigate their R-curve behaviors and toughening mechanisms. Al2O3 containing 30 vol% SiC particles of 3${\mu}{\textrm}{m}$ showed rising R-curve behavior owing to the strong crack bridging by SiC particles. The fracture toughness reached 9.1 MPa {{{{ SQRT {m} }} at the crack length of 1000${\mu}{\textrm}{m}$. On the other hand, ZrO2-toughened Al2O3 had a high flat R-curve since it rose steeply in the short crack region due to the well known transformation toughening. For Al2O3/ZrO2/SiC composites, the R-curve behavior was similar to that of Al2O3/SiC but with slightly higher toughness. The SiC particles in this composite decreased the amount of transformable tetragonal phase to reduce the effect of transformation toughening by 50%. It was also found that the fracture toughness of this composite with two different toughening mechanisms was markedly lower than that estimated by the simple addition of two contributions.