• 한국재료학회지
• /
• 제8권12호
• /
• pp.1158-1164
• /
• 1998

깁사이트를 황산수용액에 용해하여 제조된 황산알루미늄 용액에 에틸알코올을 사용하여 결정을 석출시킨 후 여과, 건조를 통하여 수황산알루미늄 결정 [$Al_2(SO_4)_3$ · $nH_2O$]을 제조하였다. XRD분석 결과 수황산알루미늄에 포함된 결정수는 n=18, 16, 12, 0이었으며, TG분석 결과 평균결정수($n_{av}$)는 14.7이었다. 수황산알루미늄을 열처리한 결과 $800^{\circ}C$에서는 무수황산알루미늄, $900^{\circ}C$와 $1000^{\circ}C$에서는 $\gamma-Al_2O_3$, $1200^{\circ}C$에서는 $\alpha-Al_2O_3$의 생성을 확인할 수 있었다. $\gamma-Al_2O_3$에 니켈피착을 위하여 0.025M농도의 황산알루미늄과 황산니켈을 사용하고 $Ni^{+2}$ 이온과 $Al^{+3}$ 이온의 농도비가 0.5인 혼합용액을 제조한 후 $\gamma-Al_2O_3$ 분말을 혼합하여 슬러리를 제조하였다 제조된 혼합슬러리에 우레아와 $NH_4OH$수용액을 첨가하여 pH를 9.0로 조절하고 $80^{\circ}C$에서 니켈피착을 하였으며, 니켈피착의 진행사항은 ORP(oxidation reduction potential), 전도도 그리고 pH값을 측정하여 관찰하였다. 니켈량에 따른 니켈피착 $\gamma-Al_2O_3$의 특성을 조사하기 위하여 피착된 $\gamma-Al_2O_3$를 $900^{\circ}C$에서 열처리하고 비표면적 변화와 열확산도를 측정하였다. 또한 $1250^{\circ}C$에서 니켈피착 $\gamma-Al_2O_3$의 열안정성은 비표면적과 XRD의 결정상변화로 확인하였다 니켈피착 $\gamma-Al_2O_3$의 표면은 XPS분석으로 Ni $2P_{3/2}$의 화학결합에너지의 변화를 확인한 결과 $NiAl_2O_4$, 상의 화학결합에너지가 증가되었다. 본 연구 결과로 니켈피착 $\gamma-Al_2O_3$가 순수 $\gamma-Al_2O_3$에 비하여 열적 안정성을 지닌 것으로 확인 되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.195-195
• /
• 2008

CAS계 유리에 $CaCO_3-Al_2O_3$ 혼합물 및 화합물을 10, 30 wt% 첨가하여 저온 소걸 및 마이크로파 유전 특성을 고찰하였다. CAS계 유리의 연화온도는 $841^{\circ}C$ 이며, CAS계 유리에 $CaCO_3$ 와 30 wt%의 $CaCO_3-Al_2O_3$ 혼합물을 melting되며, 10 wt%의 $CaCO_3$, $Al_2O_3$, $1CaCO_3-1Al_2O_3$ 혼합물 및 $CaAl_2O_4$ 화합물를 10 wt% 첨가하였을 때 $900^{\circ}C$ 이하에서 소걸이 가능하였다. 복합체의 XRD 상 분석 결과, CaCO3를 첨가하였을 때에는 모든 조성이 비정질을 나타내었고, $Al_2O_3$와 $1CaCO_3-1Al_2O_3$ 혼합물은 $Al_2O_3$ 결정상이 생성되었고, $CaAl_2O_4$ 화합물은 $CaAl_2Si_2O_8$의 hexagonal와 anorthite 결정상이 생성되었다. 따라서 CAS-10 (A, C-A, CA) 복합체는 $900^{\circ}C$에서 각각 유전율 ($\varepsilon_r$) 6.4, 6.9, 5.15 와 품질계수 ($Q^*f$) 2,400, 1,500, 3,000의 마이크로파 유전 특성을 나타내어 LTCC 기판 재료로 사용이 가능하며, 특히 $CaAl_2O_4$ 화합물을 사용하였을 때 가장 우수한 유전 특성을 나타내는 것을 확인하였다.

• 한국세라믹학회지
• /
• 제23권2호
• /
• pp.7-12
• /
• 1986

As the other silicate minerals such as kaolinite and pyrophyllite kyanite ($Al_2O_3$.$SiO_2$) is transformed to mullite and free silica or glassy phase at high temperature. Therefore $Al_2O_3$ is commonly added to kyanite in order to increase the mullite-yield. In case of $Al_2O_3$-addition mullite-yield depends on the reactivity of added $Al_2O_3$ with free silica which occurs from transformation of kyanite or exists as accessory minerals. It is well known that addition of activated $Al_2O_3$Al powder is added to kyanite to utilize the aluminothermal reac-tion of Al powder in reaction of mullite-formation.

• 한국세라믹학회지
• /
• 제32권10호
• /
• pp.1212-1218
• /
• 1995

Al2O3-coated SiC composite powder and mechanically mixed Al2O3-SiC composite powder were synthesized using Al-isopropoxide and commercial SiC as the starting materials. Experiment results showed that the sinterability of Al2O3-coated SiC composite powder was more improved than the mechanically mixed Al2O3-SiC composite powder by the effect of homogeneous coating of alumina around SiC particles. Hence, the mechanical properties of the former was also much more improved than the latter.

• 한국표면공학회지
• /
• 제36권4호
• /
• pp.329-333
• /
• 2003

The high-temperature oxidation behavior of Ti39Al-10V alloy that consisted primarily of $\beta$-Ti, ${\gamma}$-TiAl, and $\alpha_2$ $-Ti_3$Al phases was studied. The relatively thick and porous oxide scales formed consisted primarily of an outermost, thin TiO$_2$ layer, and an outer, thin $Al_2$$O_3$-rich layer, and an inner, very thick (TiO$_2$, $Al_2$$O_3$) mixed layer. Vanadium was present uniformly throughout the oxide scale. The formation and subsequent evaporation of V-oxides such as VO, $VO_2$, and $V_2$O$_{5}$ deteriorated oxidation resistance and scale adherence of the TiAl alloy significantly.y.

• 한국식품과학회지
• /
• 제27권6호
• /
• pp.915-920
• /
• 1995

This study was performed to investigate the effect of aluminum compound on the aluminum contents and histological change in brain tissue of rats. Seventy five male Sprague-Dawley strains were divided into five groups consisting of the control, 250 ppm $AlCl_3$ group, 500 ppm $AlCl_3$ group, 250 ppm $Al_2(SO_4)_3$ group, 500 ppm $Al_2(SO_4)_3$ group and kept on the diet for 2 weeks. The weight gain was increased by administration of $AlCl_3$ but decreased by administration of $Al_2(SO_4)_3$ as compared to control group. The aluminum contents in brain tissue of each group; 250 ppm $AlCl_3$ group, 500 ppm $AlCl_3$ group, 250 ppm $Al_2(SO_4)_3$ group and 500 ppm $Al_2(SO_4)_3$ group were 64.63, 102.21, 132.64 and 180.41 ppm, respectively. Aluminum accumulation in brain tissue was higher with administration of $Al_2(SO_4)_3$ than with administration of $AlCl_3$. In $AlCl_3$ administration group, multiple small intracytoplasmic granules and microvacuole were seen in large pyramidal cells of cortex and granulovacuolar degeneration. In $Al_2(SO_4)_3$ administration group revealed pollagis pallor, cellular pyknosis, microcavitation resulted from edema in deeper cortical layers were observed. Blue-pigmentation which represents the accumulation of aluminum was noted In granulovacuolar degeneration site in $Al_2(SO_4)_3$ administration group.

• 한국세라믹학회지
• /
• 제36권11호
• /
• pp.1217-1227
• /
• 1999

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1763-1770
• /
• 2007

Strong solid acid catalysts, NiO/Al2O3-TiO2/WO3 for ethylene dimerization were prepared by the addition of Al2O3 and the modification with WO3. The acid sites and acid strength were increased by the inductive effect of WO3 species bonded to the surface of catalysts. The larger the dispersed WO3 amount, the higher both the acidity and catalytic activity for ethylene dimerization. The addition of Al2O3 to TiO2 up to 5 mol% enhanced acidity and catalytic activity gradually due to the interaction between Al2O3 and TiO2 and consequent formation of Al-O-Ti bond.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1039-1040
• /
• 2006

Vacuum degassing is essential in the preparation of RS P/M aluminum alloys to remove adsorbates and for the decomposition of hydrated-$Al_{2}O_3$ on the powder surface. Changes in the surface characteristics during vacuum degassing were investigated by X-ray photoelectron spectroscopy and temperature-programmed desorption measurement. Hydrated-$Al_{2}O_3$ decomposition to crystalline-$Al_{2}O_3$ and hydrogen desorption on the surface of argon gas-atomized aluminum powder occurred at 623 K and 725 K, respectively. This temperature difference suggests that the reaction converting hydrated-$Al_{2}O_3$ to crystalline-$Al_{2}O_3$ during vacuum degassing should be divided into the two reactions $"2Al+Al_{2}O_3{\cdot}3H_2O\;2Al_{2}O_3+6H_{surf}"and"6H_{surf}3H_2"$.

• 센서학회지
• /
• 제1권1호
• /
• pp.93-100
• /
• 1992

이트리아 안정화(安定化) 지르코니아(92 mole% $ZrO_{2}$+8 mole% $Y_{2}O_{3}$)에 0.5 mole% $SiO_{2}$와 $0{\sim}2.0{\;}mole%{\;}Al_{2}O_{3}$가 첨가된 소결체의 소결성, 기계적 및 전기적 성질에 대하여 조사하였다. 소결밀도(燒結密度)는 0.5 mole% $Al_{2}O_{3}$가 첨가되었을 때 가장 높게 나타났으며 1.5 mole%이상 $Al_{2}O_{3}$가 첨가됨에 따라 감소하는 경향을 나타내었다. 비커스 경도(硬度)는 소결밀도(燒結密度)에 비례하여 나타났으며, 0.5 mole% $Al_{2}O_{3}$가 첨가되었을 때 가장 높은 전도성을 나타내었다. 일정한 산소분압(酸素分壓)에 따른 기전력 측정에서도 0.5 mole% $Al_{2}O_{3}$가 첨가되었을 매 가장 높았다. 제작된 산소(酸素)센서들의 응답특성(應答特性) 결과에서 $SiO_{2}$와 $Al_{2}O_{3}$가 각각 0.5 mole% 첨가된 센서의 응답특성이 가장 좋았다.