• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.700-708
• /
• 1996

Electroless plating technique was utilized to flip chip bonding to improve surface mount characteristics. Each step of plating procedure was studied in terms pf pH, plating temperature and plating time. Al patterned 4 inch Si wafers were used as substrstes and zincate was used as an activation solution. Heat treatment was carried out for all the specimens in the temperature range from room temperature to $400^{\circ}C$ for $30^{\circ}C$ minutes in a vacuum furnace. Homogeneous distribution of Zn particles of size was obtained by the zincate treatment with pH 13 ~ 13.5, solution concentration of 15 ~ 25% at room temperature. The plating rates for both Ni-P and Au electroless plating steps increased with increasing the plating temperature and pH. The main crystallization planes of the plated Au were found to be (111) a pH 7 and (200) and (111) at pH 9 independent of the annealing temperature.

• Korean Journal of Occupational Health Nursing
• /
• v.8 no.1
• /
• pp.22-41
• /
• 1999

This study intended to analyze the health promoting behaviors, compare their factors according to the shift pattern of duties of women workers who were working in the industrial workplace and present basic data in planning systematic and effective programs of health promotion for three-shift system and day-duty. Using Quota Sampling, 219 women workers were selected as subjects from 5 workshops which had 50 settled workers up to 300 and 10 factories which had more than 300 located in Taegu and Kyung-Book Province. Data were collected by means of questionnaire from September 12 to September 30, 1998. As the instruments of the study were used Health Promotion Lifestyle Profile(HPLP) which was adapted and adjusted by Seo, Y. O. for health promoting behavior, the one developed by Moon, J. S. (1990) for health-belief, the one developed by Sherer et al.(1982) and then adapted by Oh, H. S. for self-efficacy, and the one developed by Park, J. W. (1985) for social support. The analysis of data were performed with Cronbach's ${\chi}^2$-test, t-test, ANCOVA, Kendal tau, Pearson correlation, Stepwise Multiple Regression test using SPSS program. The results of the study are as follows : 1. There was a significant difference in age(${\chi}^2=32.46$, p=0.000), career (${\chi}^2=18.47$, p=0.000), working day(t=-3.18, p=0.000) by the shift pattern of duties in terms of socio-demographic characteristics. 2. There was a statistically significant difference between the two groups on the health promoting behaviors (t=2,52, p=0.012). The score of three-shift group on health promoting behaviors was 2.27, showing that it was lower by .13 than that of day-duty group(2.40). 3. ANCOVA involving age, career and working day as covariables, which had revealed significant difference before, showed that health promoting behaviors by the shift patterns of duties was significantly different(F=4.88, p=0.028). 4. In consideration of variables that have an influence on health promoting behavior by the shift pattern of duties, social support occupied 19.4% of health promoting behavior in the three-shift group and 22.5% including the sense of self-efficacy. In the day-duty group, social support occupied 34.4% of health promoting behavior. 5. The score of three-shift group(2.94) was significantly lower than that of day-duty group(3.12) in the perceived benefit of health-belief(t= -3.29, p=0.001), while the score of three-shift group (2.48) was significantly higher than that of day-duty group(2.24) in the perceived barrier (t=4.22, p=0.000). In the sense of self-efficacy(t=-4.20, p=0.000), the score of three-shift group(3.24) was significantly lower than that of day-duty group(3.53) while in social support(t=-4.56, p=0.000) the one of three-shift group(2.64) was significantly lower than that of day-duty group(2.88). The suggestions are as follows on the basis of the results of this study : 1. It is required to develop health promoting program that takes the shift pattern of duties of women workers into consideration. In addition, there are special demands on developing nursing strategies for health promoting behavior of three-shift workers. 2. It is required to develop specific strategies for social support which is the most significant factor to the health promoting behavior for women workers. 3. It is necessary to develop some programs for improving the sense of self-efficacy, social support, and health-belief of three-shift workers. To achieve these tasks, industrial nurses should play an active role and improve the ability of self-health care of women workers.

• Journal of Periodontal and Implant Science
• /
• v.26 no.2
• /
• pp.448-468
• /
• 1996

To maintain its functional integrity, bone is continuously remodelled by a process involving resorption by osteoeclasts and formation by osteoblasts, In order to respond to changes in the physical environment or to trauma with the relevant action, this process is strictly regulated by locally synthesized or systemic fators, Prostaglandin $E_2(PGE_2$) is perhaps one of the best studied factors, having been known to affect bone cell function for several decades.$PGE_2$ has both anabolic and catabolic activities. Excess of $PGE_2$ has been implicated in a number of pathological states associated with bone loss in a number of chronic inflammatory conditions such as periodontal disease and rheumatoid arthritis. $PGE_2$ and other arachidonic acid metabolites have been shown to be potent stimulators of osteoclastic bone resorption in organ culture. The anabolic effects of $PGE_2$ were first noticed when an increase in periosteal woven bone formation was seen after the infusion of $PGE_2$ into infants in order to prevent closure of the ductus arteriosus. The cellular basis for the catabolic actions of $PGE_2$ has been well characterized. $PGE_2$increases osteoclast recruitment in bone marrow cell cultures. Also $PGE_2$ has a direct action on osteoclast serving to inhibit activity and can also indirectly activate osteoclast via other cells in the vicinity, presumably osteoblast. The cellular mechanisms for the anabolic actions of $PGE_2$ are not nearly so well understood. The purpose of this paper was to study the effects of $PGE_2$ and dibutyl(DB)cAMP on osteoblastic clone MC3T3El cells and on the generation of osteoclasts from their precursor cells. The effect of $PGE_2$ and DBcAMP on the induction of alkaline phoaphatase(AlP) was investigated in osteoblastic clone MC3T3El cells cultured in medium containing 0.4% fetal bovine serum. $PGE_2$ and DBcAMP stimulated ALP activity and MTT assay in the cells in a dose-dependent manner at concentrations of lO-SOOng/ml. Cycloheximide, protein synthesis inhibitor, inhibited the stimulative effect of $PGE_2$ and DBcAMP on ALP activity in the cells. $PGE_2$also increased the intracellular cAMP content in a dose-dependent fashion with a maximal effect at 500ng/ml. The effect of $PGE_2$ on the generation of osteoclasts was investigated in a coculture system of mouse bone marrow cells with primary osteoblastic cells cultured in media containing 10% fetal bovine serum.After cultures, staining for tartrate-resistant acid phosphatase(TRAP)-marker enzyme of osteoclast was performed. The TRAP(+) multinucleated cells(MNCs), which have 3 or more nuclei, were counted. More TRAP(+) MNCs were formed in coculture system than in control group. $PGE_2(10^{-5}10^{-6}M)$ stimulated the formation of osteoclast cells from mouse bone marrow cells in culture. $PGE_2(10^{-6}M)$ stimulated the formation of osteoclast cells from mouse bone marrow cells in coculture of osteoblastic clone MC3T3E1 cells This results suggest that $PGE_2$ stimulates the differentiation of osteoblasts and generation of osteoclast, and are involved in bone formation, as well as in bone resorption.

• Korean Journal of Poultry Science
• /
• v.30 no.2
• /
• pp.119-128
• /
• 2003

The two experiments in this study compared litter nitrogen (N) contents after broiler chicks were raised for 42 days. Experiment I compared litter treated with aluminum sulfate (alum) [Al$_2$(SO$_4$)$_3$ㆍ14$H_2O$] (T$_1$) with nontreated litter (T$_2$) when the broiler chicks were fed the same levels of dietary protein (23% for 0∼3 weeks, 21% for 4∼6 weeks) Experiment 2 compared the alum treated litters of broiler chicks fed high protein diets (T$_3$) having 20.4% protein for 0∼3 weeks and 19.3% for 4∼6 weeks, with lower protein diets (T$_4$) having protein levels of 18.0% for 0∼3 weeks and 17.0% for 4 6 weeks. Each treatment had four replicate cages. As shown in Table 1, T$_1$ had a significantly (P<0.0l) lower pH and significantly (P<0.05) higher total N (TN), NH$_4$-N and inorganic N (IN) than T$_2$. T$_1$ and T$_2$ had similar moisture, organic carbon (OC), NO$_3$-N and organic N (ON). Alum treatment increased available N (AN) significantly (P<0.05) from 13.75$\pm$0.0l mg/g to 14.90$\pm$0.01 mg/g and predicted available N (PAN) significantly (P<0.05) from 15.00$\pm$0.0l to 16.50$\pm$0.02. The C : N ratios were 18.84$\pm$0.40 (T$_1$) and 19.46$\pm$0.10 (T$_2$) while the C : ON ratios were 28.49$\pm$1.15 (T$_1$) and 28.34$\pm$0.20 (T$_2$) although C : N ratios or C : ON ratios did not show any difference between T$_1$ and T$_2$. In Table 2, T$_3$ had significantly (P<0.05) higher moisture, TN, NH$_4$-N, ON and IN than T$_4$, while the pH, OC and NO$_3$-N were similar in both groups. The AN of T$_3$ increased significantly (P<0.05) from 10.99$\pm$0.0l mg/g to 12.98$\pm$0.03 mg/g, while the PAN increased significantly (P<0.05) from 12.39$\pm$0.10 mg/g (T$_4$) to 14.68$\pm$ 0.30 mg/g (T$_3$). The C : N ratios increased significantly (P<0.0l) from 20.07$\pm$0.20 (T$_3$) to 24.40$\pm$0.10 (T$_3$). The C : ON ratios also increased significantly (P<0.0l) from 28.99$\pm$1.15 (T$_3$) to 35.51$\pm$0.20 (T$_4$). These current research results show increased AN contents and PAN contents in alum treated litter or with increased CP levels regardless of alum treatment. However, none of the litters in this study could initially increase mineralization.

• Journal of Korean Philosophical Society
• /
• v.105
• /
• pp.49-74
• /
• 2008

Le but de notre recherche est $d^{\prime}{\acute{e}}clairer$ la nature du $d{\acute{e}}passement$ de soi aux actes humaines dnas le Thomisme. Dans le Thomisme la nature humaine qui a la raison et la $volont{\acute{e}}$ a une $intentionnalit{\acute{e}}$ ver la fin ultime. De sorte que les actes humaines qui $corr{\grave{e}}spondent$ cette nature humaine a un $caract{\grave{e}}re$ du $d{\acute{e}}passement$ de soi visant toujours plus que le $pr{\acute{e}}sent$. Le fondement de cet acte du $d{\acute{e}}passement$ de soi est $l^{\prime}{\hat{a}}me$ rationelle qui est la forme substantielle de l'homme et de soi subsistante. Chez st. Thomas ce $caract{\grave{e}}re$ du $d{\acute{e}}passement$ a trois ${\acute{e}}taps$ distinctes : (1)le $d{\acute{e}}passement$ dans l'ordre du $progr{\grave{e}}s$ naturel (2)le $d{\acute{e}}passement$ de soi dans l'ordre morale (3)le $d{\acute{e}}passement$ de soi dans l'ordre de la religion. Le $d{\acute{e}}passement$ dans l'ordre du $progr{\grave{e}}s$ naturel apparaît d'abord au $caract{\grave{e}}re$ de $l^{\prime}{\hat{a}}me$ rationelle. St. Thomas $d{\acute{e}}finit$ les vertus rationelles comme $^{\prime}pl{\acute{e}}nitude$ dans le $f{\acute{e}}blesse$, parce qu'il $consid{\grave{e}}re$ la vertu rationelle comme $finalit{\acute{e}}$ des $facult{\acute{e}}s$ du sens $ext{\acute{e}}rieur$. L'homme par le sens $ext{\acute{e}}rieur$ reçoit des $esp{\grave{e}}ces$ sensibles(especies sensibilis), et $poss{\grave{e}}de$ les images. Puis cette images sensible devenant la $r{\acute{e}}alit{\acute{e}}$ spirituelle sous forme du $m{\acute{e}}moire$ et du souvenir, devient aussi la partie de son existence. Donc chez st. Thomas la vertue rationnelle n'est pas simplement un $facult{\acute{e}}$ $sp{\acute{e}}culative$, mais elle est dans l'ordre du devenir et du $pl{\acute{e}}nitude$. A cette raison st. Thomas compare la raison(ratio) comme $g{\acute{e}}n{\acute{e}}ration$(generatio) et l'intelleigence(intellectus) comme ${\hat{e}}tre$(esse). C'est-${\grave{a}}$-dire la raison $d{\acute{e}}passe$ le sensible et l'intelligence $d{\acute{e}}passe$ la raison. Le $d{\acute{e}}passement$ de soi dans l'ordre morale $li{\acute{e}}$ au $progr{\grave{e}}s$ de la conscience. Chez st. Thomas la perception de l'objet $ext{\acute{e}}rieur$ ayant pour but d'avoir conscience de soi, se perfectionne ${\grave{a}}$ ceci. D'avoir conscience de soi signifie d'avoir $l^{\prime}identit{\acute{e}}$ de soi, et de-$l{\grave{a}}$ apparaît l'acte moral en tnat qu'acte $sp{\acute{e}}cifique$ humain. La raison pour laquelle la vie morale elle-$m{\hat{e}}me$ a un $caract{\grave{e}}$ du $d{\acute{e}}passement$, c'est que l'acte humaine qui corresfonde ${\grave{a}}$ $l^{\prime}identit{\acute{e}}$ du soi est une vie qui vise toujours plus que le $pr{\acute{e}}sent$ ou $l^{\prime}id{\acute{e}}al$. Quant au problem du $d{\acute{e}}passement$ dans l'ordre de la religion, chez st. Thomas en raison de $l^{\prime}affinit{\acute{e}}$ entre Dieu et l'homme, $o{\grave{u}}$ il y a des vertues infuses(virtutes infusas), il y a une sorte du $d{\acute{e}}passement$ religieux. Car ces vertues infuses signifie la communication entre Dieu(${\hat{E}}tre$ absolu) et l'homme(${\hat{e}}tre$ fine) et cela signifie le $d{\acute{e}}passement$ de l'humain vers le divin. Cette $id{\acute{e}}e$ thomiste permet de penser que $o{\grave{u}}$ il y a un $d{\acute{e}}passement$ de soi dans la vie religuse d'une personne, il y a une intervention $r{\acute{e}}elle$ de la providence divine. Cette $pens{\acute{e}}e$ thomiste sera alors un $caract{\grave{e}}$ $r{\acute{e}}aliste$ face ${\grave{a}}$ la $pens{\acute{e}}e$ $id{\acute{e}}aliste$ qui n'admette que le $d{\acute{e}}passement$ absolu comme $d{\acute{e}}passement$ religieux.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.3
• /
• pp.241-246
• /
• 2007

Purpose: $[^{11}C]6-OH-BTA-1$ ([N-methyl-$^{11}C$]2-(4'-methylaminophenyl)-6-hydroxybenzothiazole, 1), a -amyloid imaging agent for the diagnosis of Alzheimer's disease in PET, can be labeled with higher yield by a simple loop method. During the synthesis of $[^{11}C]1$, we found the formation of by-products in various solvents, e.g., methylethylketone (MEK), cyclohexanone (CHO), diethylketone (DEK), and dimethylformamide (DMF). Materials and Methods: In Automated radiosynthesis module, 1 mg of 4-aminophenyl-6-hydroxybenzothiazole (4) in 100 l of each solvent was reacted with $[^{11}C]methyl$ triflate in HPLC loop at room temperature (RT). The reaction mixture was separated by semi-preparative HPLC. Aliquots eluted at 14.4, 16.3 and 17.6 min were collected and analyzed by analytical HPLC and LC/MS spectrometer. Results: The labeling efficiencies of $[^{11}C]1$ were $86.0{\pm}5.5%$, $59.7{\pm}2.4%$, $29.9{\pm}1.8%$, and $7.6{\pm}0.5%$ in MEK, CHO, DEK and DMF, respectively. The LC/MS spectra of three products eluted at 14.4, 16.3 and 17.6 mins showed m/z peaks at 257.3 (M+1), 257.3 (M+1) and 271.3 (M+1), respectively, indicating their structures as 1, 2-(4'-aminophenyl)-6-methoxybenzothiazole (2) and by-product (3), respectively. Ratios of labeling efficiencies for the three products $([^{11}C]1:[^{11}C]2:[^{11}C]3)$ were $86.0{\pm}5.5%:5.0{\pm}3.4%:1.5{\pm}1.3%$ in MEK, $59.7{\pm}2.4%:4.7{\pm}3.2%:1.3{\pm}0.5%$ in CHO, $9.9{\pm}1.8%:2.0{\pm}0.7%:0.3{\pm}0.1%$ in DEK and $7.6{\pm}0.5%:0.0%:0.0%$ in DMF, respectively. Conclusion: The labeling efficiency of $[^{11}C]1$ was the highest when MEK was used as a reaction solvent. As results of mass spectrometry, 1 and 2 were conformed. 3 was presumed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.1
• /
• pp.1-17
• /
• 2002

The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.