• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.326-329
• /
• 2002

In this paper, we investigated a feasibility of cerium oxide(CeO$_2$) films as a buffer layer of MFIS(metal ferroelectric insulator semiconductor) type capacitor. CeO$_2$ layer were Prepared by two step process of a low temperature film growth and subsequent RTA (rapid thermal annealing) treatment. By app1ying an ultra thin Ce metal seed layer and N$_2$ Plasma treatment, dielectric and interface properties were improved. It means that unwanted SiO$_2$ layer generation was successfully suppressed at the interface between He buffer layer and Si substrate. The lowest lattice mismatch of CeO$_2$ film was as low as 1.76% and average surface roughness was less than 0.7 m. The Al/CeO$_2$/Si structure shows breakdown electric field of 1.2 MV/cm, dielectric constant of more than 15.1 and interface state densities as low as 1.84${\times}$10$\^$11/ cm$\^$-1/eV$\^$-1/. After N$_2$ plasma treatment, the leakage current was reduced with about 2-order.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 센서 박막재료
• /
• pp.27-31
• /
• 2001

We fabricated organic electroluminescent(EL) devices with mixed emitting layer of poly(N-vinylcarbazole)(PVK), 2,5-bis(5'-tert-butyl-2-benzoxazoly)thiophene(BBOT), N,N'-diphenyl-N,N'-(3-methyphenyl)-1,1'-biphenyl-4, 4'-diarnine(TPD) and poly(3-hexylthiophene)(P3HT). To improve the external quantum efficiency of EL devices, we added the functional layer to the devices such as LiF insulating layer, carrier confinement layer(BBOT) and hole injection layer(CuPc). In the ITO/emitting layer/Al device, the maximum quantum efficiency at 15V was $1.88{\times}10^{-5}%$. And then, it is increased by a factor of 27 to $5.2{\times}10^{-3}%$ in ITO/CuPc/emitting layer/BBOT/LiF/Al device at 15V.

• 한국전기전자재료학회논문지
• /
• 제27권9호
• /
• pp.589-593
• /
• 2014

AlNO multi-layer thin films on aluminum substrates were prepared by DC reactive magnetron sputtering method. $Al_2O_3$/AlNO(LMVF)/AlNO(HMVF)/Al/substrate of 4 multi-layer has been prepared in an Ar and ($N_2+O_2$) gas mixture, and $Al_2O_3$ of top layer is anti-reflection layer on double AlNO(LMVF)/AlNO(HMVF) layers and Al metal of infrared reflection layer. In this study, the roughness and surface properties of AlNO thin films were estimated by field emission scanning electron microscopy(FE-SEM). The grain size of AlNO thin films increased with increasing sputtering power. The composition of thin films has been systematically investigated using electron probe microanalysis(EPMA). The optical properties with wavelength spectrum were recorded by UV-Vis-NIR spectrophotometry at a range of 200~1,500 nm. The absorptance of AlNO films shows the increasing trend with swelling ($N_2+O_2$) gas mixture in HMVF and LMVF deposition. The excellent optical performance showed above 98% of absorptance in visible wavelength region.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.164-169
• /
• 2000

The remote measurement system(RMS) as a new experimental method is limited in its application to crack measurements at elevated temperatures because of the oxide layer on the specimen surface. Since TiAlN and Cr coating layers have a high resistance to oxidation and wear, this paper proposed a TiAlN and Cr coating technique for specimens to facilitate the measurement of crack growth behavior using RMS. To investigate the effects of the coating layer, tension and fatigue tests were carried out at room temperature and at 538$^{\circ}C$, using specimens of 1Cr-1Mo-0.25V steel. From the experimental results, it was found that the mechanical properties of the TiAlN and Cr coated specimens were similar to those of the substrate. Accordingly, the TiAlN and Cr coated layer had hardly any influence on the fatigue crack propagation.

• 대한전자공학회논문지
• /
• 제25권10호
• /
• pp.1202-1208
• /
• 1988

n-AIGaAs/GaAs 계면에서의 2 차원 전자가스(2DEG)의 밀도와 전자상태를 각각 고전역학적인 방법과 양자역학적인 방법으로 계산하였다. Spacer두께와 AIGaAs층의 도핑농도가 2DEG 밀도에 주는 영향과 온도와 GaAs층의 불순물 농도가 전자상태에 미치는 영향을 조사하였다.

• 한국재료학회지
• /
• 제28권5호
• /
• pp.268-272
• /
• 2018

An $Al_2O_3/AlN$ bilayer deposited on GaN by atomic layer deposition (ALD) is employed to prepare $Al_2O_3/AlN/GaN$ metal-insulator-semiconductor (MIS) diodes, and their interfacial properties are investigated using X-ray photoelectron spectroscopy (XPS) with sputter etch treatment and current-voltage (I-V) measurements. XPS analyses reveal that the native oxides on the GaN surface are reduced significantly during the early ALD stage, indicating that AlN deposition effectively clelans up the GaN surface. In addition, the suppression of Al-OH bonds is observed through the ALD process. This result may be related to the improved device performance because Al-OH bonds act as interface defects. Finally, temperature dependent I-V analyses show that the barrier height increases and the ideality factor decreases with an increase in temperature, which is associated with the barrier inhomogeneity. A Modified Richardson plot produces the Richardson constant of $A^{**}$ as $30.45Acm^{-2}K^{-2}$, which is similar to the theoretical value of $26.4Acm^{-2}K^{-2}$ for n-GaN. This indicates that the barrier inhomogeneity appropriately explains the forward current transport across the $Au/Al_2O_3/AlN/GaN$ interface.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.255-255
• /
• 2015

나노압침방법을 적용하여 arc ion plating을 통해 제조된 TiAlSiN 코팅층의 질소 함량에 따른 나노 기계적 특성을 평가하였다. 코팅층의 질소 함량은 28~30 [at.%] 이었다. 코팅층에는 AlN, TiSi, $Al_5Ti_3$, $Ti_3AlN$, $Al_5Ti_2$ 상이 형성되었다. 질소 함량이 더 작은 코팅층의 나노경도, 마찰계수, 피로한계의 값이 높아짐을 알 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.710-713
• /
• 2002

In order to improve the power efficiency of multi-layer organic light emitting diodes (OLEDs), electron injection into ETL(electron transport layer) from cathode at the interface between ETL and cathode was enhanced by interposing a proper electron injection layer at the interface. The HTL(hole transport layer) and ETL materials used were N, N'diphenyl- N, N' - bis(3-methylphenyl-1, 1'- biphenyl - 4, 4 'diamine (TPD) and tris (8-hydroxyquinoline) aluminum ($Alq_3$) respectively. Cathodes using co-evaporated Al-CsF, Al-KF, and Al-NaF composites are adopted to enhance the electrical and optical properties of OLEDs. OLEDs with alkaline metal-doped cathode show a luminance of as high as 35,000 cd/$m^2$, and external quantum efficiency about 1.35 %. In addition, they show higher power efficiency at all bias conditions and good reproducibility.

• 한국진공학회지
• /
• 제11권1호
• /
• pp.50-58
• /
• 2002

Si 기판 위에 GaN의 성장은 Si이 사파이어보다 값이 저렴하고, 기존의 Si의 직접회로 공정에 GaN를 쉽게 접목시킬 수 있는 측면에서 다양한 장점이 있다. 그러나, Si은 GaN와의 격자상수와 열팽창계수의 차이가 사파이어보다 크며, 이로 인해 격자부정합에 의한 여러 결함을 발생시킨다. 따라서, Si 기판 위에 고품질의 GaN를 얻기 위해서는 AlN과 같은 완충층을 사용하여 격자부정합에 의한 결함을 줄여야 한다. 본 연구에서는 Si (111) 기판 위에 MOCVD, 스퍼터링과 MOMBE의 3가지 방법으로 결정성이 다른 3가지 유형의 AlN 완충층을 얻은 후, MOCVD법으로 GaN를 증착시켜 각각의 성장특성을 비교하였다. AlN 완충층과 GaN의 격자결합, 완충층의 표면 거칠기가 격자결함에 미치는 영향, 결정성, 성장방향, 결함(공공, 적층결함, 전위) 등을 TEM, XRD를 이용해 비교 분석하였다. AlN완충층의 결정성은 GaN의 성장에 있어 매우 큰 영향을 미치는 것을 확인할 수 있었다. 초기 성장과정에서 MOCVD과 MOMBE 법으로 성장시킨 AlN 완충층은 GaN 초기 성장에서 out-of-plane의 성장방향이 틀어지는 것을 감소시켜 주었다.

• 센서학회지
• /
• 제5권5호
• /
• pp.79-84
• /
• 1996

$n^{+}$형 GaAs 기판위에 MBE로 $1\;{\mu}m$ 두께의 GaAs층과 AlAs층 및 GaAs cap 단결정층을 차례로 성장시켰다. AlAs/GaAs epi층을 $400^{\circ}C$에서 각각 2시간 및 3시간동안 $N_{2}$로 bubbled된 $H_{2}O$ 수증기(水蒸氣)($95^{\circ}C$)에서 산화시켰다. 산화시간에 따른 산화막의 XPS 분석결과, 작은 양의 $As_{2}O_{3}$ 및 AlAS 그리고 원소형 As들이 2시간동안 산화된 시편에서 발견되었다. 그러나 3시간동안 산화시킨 후에는, 2시간동안 산화시켰을 때 산화막내에 존재하던 소량의 As 산화물과 As 원자들은 발견되지 않았다. 따라서 As-grown된 AlAs/GaAs epi층은 3시간동안 $400^{\circ}C$의 산화온도에서 선택적으로 $Al_{2}O_{3}/GaAs$으로 변화되었다. 그러므로 산화온도 및 산화시간은 AlAs/GaAs 계면에서 결함이 없는 표면을 형성하고 기판쪽으로 산화가 진행되는 것을 멈추기 위해서는 매우 결정적으로 작용하는 것으로 조사되었다.