• Economic and Environmental Geology
• /
• v.30 no.1
• /
• pp.35-49
• /
• 1997

The coal formation of the Deokpyeong area are interbedded along metapelites of the Ogcheon Supergroup, which are composed mainly of graphite, quartz, muscovite and associated with small amounts of biotite, chlorite, pyrite and barite. The ratios of $SiO_2/Al_2O_3$, $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ of the coaly metapelite are variable and wide range from 1.80 to 10.21, from 27.8 to 388.8 and from 7.6 to 61.8, respectively. These coal formation were deposited in basin of marine environments, and the REE of these rocks are not influenced with metamorphism and hydrothermal alterations on the basis of $Al_2O_3$ versus La, La against Ce, the ratios of La/Ce (0.19 to 0.99) and Th/U (0.02 to 4.75). These rocks also show much variation in $La_N/Yb_N$ (1.19 to 22.89), Th/Yb (0.14 to 21.43) and La/Th (0.44 to 13.67), and their origin is explained by derivation from a mixture of sedimentary and igneous rocks. The wide range in trace and REE element characteristics as Co/Th (0.12 to 2.78), La/Sc (0.33 to 10.18), Sc/Th (0.57 to 5.73), V/Ni (8 to 2347), Cr/V (0.02 to 0.67) and Ni/Co (1.56 to 32.95) of these coaly metapelites argues for inefficient mixing of the various source lithologies during sedimentation. Deep to pale green barium-vanadium muscovites (vanadium-oellacherite) have been found in this coal formations. Modes of occurrence and grain size of muscovite are heterogeneous, but most of the barium and vanadium-bearing muscovites occur along the boundaries between graphite and quartz grains, ranging from 200 to $350{\mu}m$ in length and from 40 to $60{\mu}m$ in width. Results of X-ray diffraction data of the minerals characterized to be monoclinic system with $a=5.249{\AA}$, $b=8.939{\AA}$, $c=20.924{\AA}$ and ${\beta}=95.894^{\circ}$. Representative chemical formula of the muscovite was $(Na_{0.09}K_{1.44}Ba_{0.46})(Al_{2.75}Ti_{0.07}V_{0.56}Fe_{0.08}Mg_{0.50})(Si_{6.12}Al_{1.88})O_{22}$. The V possibly substitute octahedral Al, and the Ba is coupled substitution of $K^+Si^{4+}=Ba^{2+}Na^+Ca^{2+}$, which compositional ranges of V and Ba are from 0.42 to 0.69 and from 0.34 to 0.56 based on $O_{22}$, respectively. Formation mechanism of the barium-vanadium muscovites in the coaly metapelite is shown that the formed by high pressure and temperature from regional metamorphism origanated during diagenesis at the interface between a basinal brine and organic matter.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.157-157
• /
• 2003

수평 전기로에서 CdIn2Te4 다결정을 용융법으로 합성하고 Bridgman법으로 tetragonal structure의 c축에 평행한 CdIn2Te4 단결정을 성장시켰다. c축에 평행한 시료의 광흡수와 광전류 spectra를 293K에서 10K까지 측정하였다. 광흡수 spectra에 의해 band gap Eg(T)는 varshni공식에 따라 계산한 결과 1.4753eV-(7.78$\times$$10^{-3}$eV/K)T$^2$/(T+2155K)임을 확인하였다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293K에서 각각 9.01$\times$$10^{16}$ /㎤, 219 $\textrm{cm}^2$/V.S였다. 광전류 스펙트럼으로부터 Hamilton matrix(Hopfield quasicubic mode)법으로 계산한 결과 crystal field splitting $\Delta$cr값이 0.2704 eV이며 spin-orbit $\Delta$so 값은 0,1465 eV임을 확인하였다. 10K일 때 광전류 봉우리들은 n=1일때 Al-, Bl-와 Cl-exciton 봉우리임을 알았다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.10
• /
• pp.108-113
• /
• 1994

The characteristics of the oxidation prevention layers for the copper metallization were investigated. The thin films such as Cr, TiN and Al were used as the oxidation prevention layers for copper. Ultra thin aluminum films were found to prevent the oxidation of copper up to the highest oxidation annealing temperature among the barrier layers examined in this study. It was found that oxygen did not diffuse into copper through aluminum films because of the aluminum oxide layer formed on the aluminum surface and the ultra thin aluminum film could be a good oxidation barrier layer for the copper metallization.

• 한국해양학회지
• /
• v.30 no.5
• /
• pp.371-381
• /
• 1995

To investigate the concentrations and transport patterns of particulate metals in river suspended matters, eighteen samples were collected from a fixed station located in the upper part of the Keum River through one year, and analysed for major elements (AI, Fe, P, Mn) and trace elements (Cr, Co, Ni, Cu, Zn, Cd, Pb, U). The contents of metals in suspended particulate matters (SPM) varied greatly with season and SPM load; maximum value in winter with low SPM level and minimum value in flood period and in spring Yangtze SPMs. The different trace metal level between rivers of Korea and China may be caused by the different geology of drainage basin(U) and by the different extent of anthropogenic input (Mn, Pb). Most of all particulate metals (>70%) except Mn, P and Cd were transported in the flood period with high water discharge and high suspended load. The magnitude of each transport phase (dissolved, non-detrital and detrital metals) was compared. The portions of labile metals (dissolved plus non-detrital metals) in the aquatic environment were in the range of 50%(Co) to 92%(Mn) of total metal transport and in the rank of Mn>Cd, U>Cu>Zn>Ni>Pb>Co.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.371.1-371.1
• /
• 2016

다양한 물질계의 2차원 나노구조는 그래핀과 함께 그 고유특성으로 최근 광전소자, 전자소자, 센서, 에너지 생성 및 저장과 수소에너지 생성 등의 응용으로 매우 많은 관심을 받고 있다. 특히 층상이중수산화물 (layered-double hydroxide; LDH) 2차원 나노구조는 생성의 용이성과 층상 내 금속 이온의 교환을 통한 특성의 자유로운 제어가 가능하므로 많은 관심을 받고 있다. 층상이중수산화물 화합물은 [Zn(1-x) MIII(x)(OH)2][$An-x/n{\cdot}mH2O$] (MIII = Al, Cr, Ga; An- = CO32-, Cl-, NO3-, CH3COO-) 구조로써, Brucite-type 구조 내에서 3가 양이온의 상태에 따라서 다양한 특성을 제어할 수 있는 장점이 있다. 이러한 장점으로 인해 층상이중수산화물 화합물은 촉매나, 에너지 저장, 음이온 교환 및 흡착, 화학적 촉매, 바이오 소자 등에 응용이 연구되고 있으며, 다양한 금속 산화물을 제조하기 위한 중간자 precursor로써도 연구되고 있다. 하지만, 이러한 대부분의 연구들을 통한 결과물들이 분말 및 수용액 상태로 남게 되며, 이러한 화합물의 특성을 제어하기 어려운 문제점이 있다. 더욱이 이러한 나노구조물들을 다양한 소자로 응용하기 위해서는 상용의 실리콘이나 glass 등의 기판형태의 물질상에 성장시킬 수 있어야 하며, 그러한 기판 위에서의 형상 및 특성 제어가 용이해야 한다. 따라서 본 연구에서는 실리콘 기판을 적용한 Zn기반의 층상이중 수산화물 화합물을 성장하고, 하부물질의 조성제어를 통한 층상이중수산화물 화합물의 형상제어가 가능한 기술에 관한 연구를 보고하고자 한다. 이를 위한 하부물질의 조성은 Zn와 Al을 통해 이루어지며, 기형성된 Al2O3박막을 핵형성층으로 활용한다. 이러한 방법으로 형성된 층상이중수산화물 화합물에 대해 이차전자주사현미경, 투과전자현미경 및 X-ray회절기법을 통해 구조분석을 하고, Raman 및 광발광스펙트럼 분석을 통해 광학적 분석을 시행함으로써, 층상이중수산화물이 기판상에서 형성되는 메커니즘에 관한 규명을 시행하였다. 이러한 분석연구를 통해 핵형성층의 에칭 따라 실리콘 기판상에서 성장하는 층상이 중수산화물 화합물의 형상 및 조성이 제어되는 메커니즘을 구명하였다.

• The Korean Journal of Malacology
• /
• v.28 no.3
• /
• pp.233-244
• /
• 2012

Goseong bay, located in southeast sea of Korea with an area of 2,100 ha, is a semi-enclosed bay well-known for oyster farming cultured in an extended range of 148 ha. The objective of this study is to provide the fundamental data in order to manage the effective sea area. A total 26 of surface sediment were collected from Goseong bay to evaluate their sedimentary environment and heavy metals. The loss on Ignition (LOI), C/N ratio, acid volatile sulfide (AVS) and heavy metals were analyzed. loss on ignition (LOI) of surface sediment range from 1.00% to 3.03% (average 2.00%). The carbonate content ranges from 0.52% to 4.29% (average 2.37%). C/N ratio of organic matter showed that most part of organic matter comes from neighboring continent. Acid volatile sulfide (AVS) value of surface sediment from 0.02 mg/g to 1.43 mg/g (average 0.24 mg/g). A ten element of surface sediments (Al, As, Cd, Cr, Cu, Hg, Ni, Pb, V, Zn) were calculated by enrichment factor (Ef) and the results show that some areas are highly polluted with respect Cu and Hg. The correlation matrix displays the existence of remarkable levels of correlation with both positive and negative values among different variable pairs. LOI and AVS showed both positive values. LOI and AVS values falls under 2% and 1%. Therefore, Goseong bay showed good in quality of sediment.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.701-717
• /
• 2003

The objective of this study was to extensively estimate the air quality trends of the study area by surveying con-centration trends in months or seasons, after analyzing the mass concentration of PM-10 samples and the inorganic lements, ion, and total carbon in PM-10. Also, the study introduced to apply the PMF (Positive Matrix Factoriza-tion) model that is useful when absence of the source profile. Thus the model was thought to be suitable in Korea that often has few information about pollution sources. After obtaining results from the PMF modeling, the existing sources at the study area were qualitatively identified The PM-10 particles collected on quartz fiber filters by a PM-10 high-vol air sampler for 3 years (Mar. 1999∼Dec.2001) in Kyung Hee University. The 25 chemical species (Al, Mn, Ti, V, Cr, Fe, Ni, Cu, Zn, As, Se, Cd, Ba, Ce, Pb, Si, N $a^{#}$, N $H_4$$^{+}$, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, TC) were analyzed by ICP-AES, IC, and EA after executing proper pre - treatments of each sample filter. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols. the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided source profiles (scaled F matrix). So, 11 sources were qualitatively identified, such as secondary aerosol related source, soil related source, waste incineration source, field burning source, fossil fuel combustion source, industry related source, motor vehicle source, oil/coal combustion source, non-ferrous metal source, and aged sea- salt source, respectively.ively.y.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.409-412
• /
• 2003

Total extraction of stream sediments in the Kwangyang mine area shows their significant pollution with most trace metals such as Cr, Co, Fe, Pb, Cu, Ni, Zn and Cd, due to sulfide oxidation in waste dumps. Calculations of enrichment factor shows that Chonam-ri creek sediments are more severely contaminated than Sagok-ri sediments. Using the weak acid (0.1N HCl) extraction and sequential extraction techniques, the transport and sediment-water partitioning of heavy metals in mine drainage were examined for contaminated sediments in the Chonam-ri and Sagok-ri creeks of the Kwangyang Au-Ag mine area. Calculated distribution coefficient (Kd) generally decreases in the order of Pb $\geq$Al > Cu > Mn > Zn > Co > Ni $\geq$ Cd. Sequential extraction of Chonam-ri creek sediments shows that among non-residual fractions the Fe-Mn oxide fraction is most abundant for most of the metals. This indicates that precipitation of Fe hydroxides plays an important role in regulating heavy metal concentrations in water, as shown by field observations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.244.2-244.2
• /
• 2014

금속, 플라스틱, 유리 등의 재료 표면에 다양한 색상을 표현하기 위해 일반적으로 습식 도금을 많이 적용하고 있다. 하지만 습식 도금은 공정 수가 많을 뿐만 아니라 위험물질 및 오염물질을 많이 사용하기 때문에 산업사고, 환경오염 등을 야기 시킨다. 따라서 본 연구에서는 친환경적 방법인 물리적기상증착(PVD ; Physical Vapor Deposition) 방식의 한 종류인 스퍼터링(Sputtering)으로 색상을 구현하였다. PVD 방식의 증착은 습식 도금 방식에 비해 친환경적이며, 전처리에서 후처리까지 한 공정으로 가능하다는 점이다. 스퍼터링은 PVD의 다른 방식인 E-beam 방식에 비해 대량생산을 할 수 있다는 장점이 있다. 양산형 스퍼터링 장비(${\Phi}1200mm{\times}H1400mm$)로 실험을 진행하였으며, 증착 물질은 Ti, Al, Cr 을 사용하였고, 반응성 가스(Reactive Gas) 로는 N2, C2H2 가스를 사용하였다. 전처리는 LIS (Linear Ion Source)로 식각(Etching) 하였고, 펄스직류전원공급장치(Pulsed DC Power Supply)를 사용하여 증착 하였으며, 증착시 기판에 bias (-100 V)를 인가 하였다. 그 결과 회색계열, 갈색계열 등 여러가지 색을 구현할 수 있었으며, 증착된 박막의 특성을 알아보기 위하여 색차계, 내마모 시험기, 연필경도 시험기를 사용하였다. 향후 후처리 공정으로 내지문(AF ; anti fingerprint coating) 박막 등과 같은 실용적인 박막을 증착할 계획이다.

• Korean Journal of Materials Research
• /
• v.24 no.7
• /
• pp.381-387
• /
• 2014

The ${\beta}$-transus temperature in titanium alloys plays an important role in the design of thermo-mechanical treatments. It primarily depends on the chemical composition of the alloy and the relationship between them is non-linear and complex. Considering these relationships is difficult using mathematical equations. A feed-forward neural-network model with a back-propagation algorithm was developed to simulate the relationship between the ${\beta}$-transus temperature of titanium alloys, and the alloying elements. The input parameters to the model consisted of the nine alloying elements (i.e., Al, Cr, Fe, Mo, Sn, Si, V, Zr, and O), whereas the model output is the ${\beta}$-transus temperature. The model developed was then used to predict the ${\beta}$-transus temperature for different elemental combinations. Sensitivity analysis was performed on a trained neural-network model to study the effect of alloying elements on the ${\beta}$-transus temperature, keeping other elements constant. Very good performance of the model was achieved with previously unseen experimental data. Some explanation of the predicted results from the metallurgical point of view is given. The graphical-user-interface developed for the model should be very useful to researchers and in industry for designing the thermo-mechanical treatment of titanium alloys.