• 자원환경지질
• /
• 제43권3호
• /
• pp.269-278
• /
• 2010

우리는 단청안료의 착색제에 대한 특성을 살펴보았고, 이번 연구가 우리 전통 단청의 색을 재현하는데 기여하길 바란다. 광주 전남지역 목조 고건축물에서 자연적으로 박리가 일어난 부분의 단청안료 시료를 채취하고, 이를 XRD와 EDS-SEM분석을 이용하여 착색제를 분석하였다. 백색안료에서는 고대부터 착색제로 사용되어온 석고$(CaSO_4{\cdot}2H_{2}O)$,석영$(SiO_2)$, 백연석$(PbCO_3)$ 및 호분$(CaCO_3)$과 현대에서 많이 사용되는 산화지당$(TiO_2)$이 모든 시료에서 확인되었다. 적색안료에서는 고대부터 착색제로 사용된 석간주$(Fe_{2}O_{3})$와 연단$(Pb_{3}O_{4})$ 및 현대안료 착색제인 C. I. pigment orange $13(C_{32}H_{24}C_{12}N_{8}O_{2})$이 확인 되었지만, 진사(cinnabar, HgS)는 관찰되지 않았다. 황색안료에서는 납을 주성분으로 하는 황연인 홍연석$(PbCrO_4)$과 고대부터 사용된 밀타승(PbO)이 확인되었다. 청색안료에서는 착색제인 소달라이트 $(Na_{4}BeAlSi_{4}O_{12}Cl)$와 노제안$(Na_{8}Al_{6}Si_{6}O_{24}SO_{4})$이 확인되었으며, 현대안료 착색제인 C. I. pigment blue $29(Na_{7}Al_{6}Si_{6}O_{24}S_{3})$ 도 확인되었다. 녹색안료에서는 착색제로 카루머타이트(calumetite, $Cu(OHCI)_{2}{\cdot}2H_{2}O$), 에스콜라이트$(Cr_{2}O_{3})$, 디크롬트리옥사이드(dichromium trioxide, $Cr_{2}O_{3}$), 에머랄드그린$(C_{2}H_{3}As_{3}Cu_{2}O_{8})$ 및 현대안료 착색제인 C. I. pigment green$(C_{32}H_{16}-XCl_{x}Cu_{8})$이 확인되었다. 흑색안료에서는 먹(송연)이 확인 되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.259-259
• /
• 2010

Periodically polarity inverted (PPI) ZnO structures on (0001) Al2O3 substrates are demonstrated by plasmas assisted molecular beam epitaxy. The patterning and re-growth methods are used to realize the PPI ZnO by employing the polarity controlling method. For the in-situ polarity controlling of ZnO films, Cr-compound buffer layers are used.[1, 2] The region with the CrN intermediate layer and the region with the Cr2O3 and Al2O3 substrate were used to grow the Zn- and O-polar ZnO films, respectively. The growth behaviors with anisotropic properties of PPI ZnO heterostructures are investigated. The periodical polarity inversion is evaluated by contrast images of piezo-response microscopy. Structural and optical interface properties of PPI ZnO are investigated by the transmission electron microcopy (TEM) and micro photoluminescence ($\mu$-PL). The inversion domain boundaries (IDBs) between the Zn and the O-polar ZnO regions were clearly observed by TEM. Moreover, the investigation of spatially resolved local photoluminescence characteristics of PPI ZnO revealed stronger excitonic emission at the interfacial region with the IDBs compared to the Zn-polar or the O-polar ZnO region. The possible mechanisms will be discussed with the consideration of the atomic configuration, carrier life time, and geometrical effects. The successful realization of PPI structures with nanometer scale period indicates the possibility for the application to the photonic band-gap structures or waveguide fabrication. The details of application and results will be discussed.

• 한국환경과학회지
• /
• 제8권4호
• /
• pp.491-496
• /
• 1999

Removal of Cu(II), Cr(III) and Pb(II) ions from aqueous solutions using the adsorption process on the loesses has been investigated. Variations of contact time, pH, adsorption isotherms and selectivity of coexisting ions were experimental parameters. pH of KJ and YIK samples diluted to 1% solution, was rearly the same with each value of pH 5.58 and 5.49, and both samples showed weak acidic properties. From chemical analysis, both samples contain remarkably different amounts of ${SiO}_{2}$, ${Al}_{2}O_{3}$ and ${Fe}_{2}O_{3}$. From XRD measurement, quartz was mainly observed in both samples. Kaolinite was also observed, also in both samples, but Feldspar was only observed in KJ sample. Adsorption of metal ions on the loesses were reached at equilibrium by shaking for about 30min. The adsorption of Cr(III) ion was higher than that of Cu(II) oand Pb(II) ions. The order of amount adsorbed among the investigated ions was Cr(III)>Pb(II)>Cu(II). In acidic solution, the adsorptivity of loesses was increased as pH increased. The adsorption of Cr(III) ion on the loesses were fitted to the Freundlich isotherms. Freundlich constants(1/n) of KJ and YIK loesses were 0.54 and 0.55, respectively.

• 대한치과기공학회지
• /
• 제29권2호
• /
• pp.213-223
• /
• 2007

The success of a porcelain fused to metal (PFM) restoration depends upon the quality of the porcelain-metal bond. The adhesion between metal substructure and dental porcelain is related to the diffusion of oxygen to the reaction layer formed on cast-metal surface during firing. The purposed of this investigation was to study the effects of gold based bonding agent on Ni-Cr alloy-ceramic adhesion between porcelain matrix, gold based bonding agent and metal substructure interface. gold based bonding agent have been applied as an intermediate layer between a metal substructure and a ceramic coating. gold based bonding agent(Aurofilm NP, Metalor, Swiss) was applied on Ni-Cr alloy surface by four method. Surfaces only air abraded with 110${\beta}\neq$ Al2O3 particles were used as control. metal ceramic adhesion was evaluated by a biaxial flexure test(N=5) and volume fraction of adherent porcelain was determined by SEM/EDS analysis. Result of this study suggest that the layering sequence of gold based bonding agent is very important and can improve porcelain adherence to PFM.

• 전자공학회논문지D
• /
• 제34D권5호
• /
• pp.61-66
• /
• 1997

In this paper we report the fabrication of an InGaAs metal-semiconductor-metal (MSM) photodiode(PD) which an InAlAs barrier enhancement layer that has very low dark current and high speed chracteristics. The detector using Cr/Au schottky metal fingers with 4um spacing on a large active area of 300*300um$^{2}$ offers a low dark current of 38nA at 10V, a low capacitance of 0.8pF, and a high 3-dB bandwidth of 2.4 GHz. To our knowledge, these characteristics are better than any previously published results obtained from large area InGaAs MSM PD's. The RC equivalent model and frequency domain current response model considering transit time were also used to analyze the frequency characteristic of the fabricated device.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1996년도 제6회 학술강연회논문집
• /
• pp.131-137
• /
• 1996

HTPB/AP/Al이 주성분인 2종의 혼합형 추진제를 대상으로 4종의 금속선(Ag, Cu, Al, Ni-Cr)윰 각각 삽입하여 금속선의 직경(0.1~0.8mm)과 연소 압력에 따른 금속선에 인접한 고체 추진제의 연소 속도 증가비($r_w$/$r_sb$)와 압력 지수(n)의 변화를 고찰하였다. 금속선을 추진제에 삽입함으로써 추진제의 $r_w$/$r_sb$ 는 크게 중가하였고, 1000 psia의 압력에서의 최대 6.59배 증가하였다. 그러나 녹는 점이 비교적 낮은 Al 선이나 Ag선은 금속선 직경이 작아짐에 따라 한계 직경에서 $r_w$가 급격히 감소하는 최대값이 존재하였다. 자연 발화 온도와 금속선으로 전달되는 열원인 연소 기체 불꽃 온도로 구성된 무차원군을 Buckingham pi 정리에 의해 구해진 $r_w$/$r_sb$ 에 대한 기존의 무차원 실험식에 추가로 적용하여 계산해 본 결과, 자연 발화 온도는 고려하지 않고 금속선의 녹는 점과 연소 기체의 불꽃 온도를 무시한 Hsing 의 실험식에 의해 계산된 결과보다 표준 편차가 45%이상 줄어듬을 알 수 있었다.

• 대한화학회지
• /
• 제64권3호
• /
• pp.153-158
• /
• 2020

With the recent popularity of mobile devices, the demand for lithium-ion batteries is increasing. In this study, the surface treatment process for the development of the Al (aluminum) lead tab for positive electrode, a key component of the pouch-type lithium-ion battery, was investigated. Anodizing and sealing processes were tested as surface treatment techniques. It was found that only a sealing process is needed to obtain sufficient adhesive strength. In the present study, an adhesive strength of 17 N/12 mm was achieved by degreasing and etching pretreatment, followed by a sealing process of 10 min duration. This adhesive strength was greater than that achievable using Cr (chromium) surface treatment. Using various surface analysis techniques, the shape and composition of the surface before and after being subjected to the surface treatment were compared and analyzed. The results of this study are expected to contribute to the development of an eco-friendly lead tab.

• Tribology and Lubricants
• /
• 제23권4호
• /
• pp.170-174
• /
• 2007

Wear and scuffing tests were conducted using friction and wear measurement of piston rings and cylinder blocks in low friction diesel engine. The frictional forces, wear amounts and cycles to scuffing in boundary lubricated sliding condition were measured using the reciprocating wear tester. The cylinder blocks were used as reciprocating specimens, and the piston rings with several coatings were used as fixed pin. Several coatings were used such as DLC, TiN, Cr-ceramic and TiAlN in order to improve the tribological characteristics. From the tests wear volume of piston ring surfaces applied various coatings were compared. During the tests coefficients of friction were monitored. Test results showed that DLC coatings showed good tribological properties. TiN and Cr-ceramic coated rings showed good wear resistance properties but produced high friction.

• 한국안광학회지
• /
• 제8권2호
• /
• pp.111-117
• /
• 2003

국내외 썬글라스 반미러 코팅렌즈의 광학적 특성을 파악하기 위해, 분광광도계를 이용하여 반미러 코팅렌즈의 반사율을 측정하였으며, Macleod 프로그램을 이용해 계산한 결과와 비교 분석하였다. 또한 황금 색깔이 나는 TiN을 이용한 반미러 코팅렌즈를 설계하였고, 광학특성을 조사하였다. 반미러 코팅렌즈의 분석결과, 은색 투톤(two tone) 반미러 코팅은 금속 크롬(Cr)을 사용하였으며 경도를 증가시키기 위하여 크롬위에 $SiO_2$(또는 $Al_2O_3$)를 증착하여 사용하였다. 크롬 위에 증착되는 $SiO_2$의 두께는 10nm 정도가 적정한 것으로 판단된다. 칼라 반미러 코팅의 경우 디자인 결과는 각각 다음과 같다 ; blue 계열은 [air|$SiO_2$(66.3)|$TiO_2$(129.0)|$SiO_2$(62.9)|$SiO_2$(26.0)|$TiO_2$(120.3)|$SiO_2$(9.1)|glass]이며, gold 계열은 [air|$SiO_2$(60.6)|$TiO_2$(86.2)|$SiO_2$(13.5)|$TiO_2$(86.8)|$SiO_2$(214.38)|glass]이며, green 계열은 [air|$SiO_2$(74.3)|$TiO_2$(75.8)|$SiO_2$(44.3)|$TiO_2$(11.6)|$SiO_2$(160.8)|$TiO_2$(12.9)|$SiO_2$(183.3)|$TiO_2$(143.8)|glass]이며, silver 계열은 [air|$SiO_2$(21.2)|$TiO_2$(49.7)|$SiO_2$(149.3)|glass]이다. white 반미러 코팅인 경우는 [air|$SiO_2$(17nm)|$TiO_2$(43nm)(또는 $ZrO_2$)|$SiO_2$(87nm) polysiloxane($4.46{\mu}m$)|glass or CR-39]이며, 가시광선 영역(400~700 nm)에서 평균 19%의 반사율을 가지며 흡수가 적기 때문에 약 80%의 투과율을 보이는 white 타입의 반미러가 되게 된다. 황금빛 색깔을 띠는 반미러 코팅렌즈의 설계에 있어서 [air|$SiO_2$(170nm)|TiN(15nm)|glass]가 되면 CIE 좌표값은 거의 [air|Au(150nm)|glass]의 좌표값과 유사해지는 것을 볼 수 있었다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1991년도 춘계연구발표회 논문개요집
• /
• pp.73-74
• /
• 1991

The films with ferromagnetic fine particles dispersed in nonmagnetic matrix, such as $Fe-Al_2O_3$ and Fe-Cu have been studied for use of magnetic recording medium, optically device and sensor. Their magnetic properties depend strongly on structural parameter such as size and volume fraction of ferromagnetic particles. Fe-Cr-Ni alloy sputtered films also have microstructure with ferromagnetic -- b.c.c phase and nonmagnetic f.c.c phase grains. Magnetic properties of these films depend strongly on such a unique structure. These are depend on the ratio in volume of ferromagnetic particles to nonmagnetic ones $V_F/V_N$, the saturation magnetization Ms increased with increase of $V_F/V_N$. The coercivity Hc of the as-deposited films took maximum value of about 200 Oe at adequate $V_F/V_N$ and then Ms and Squareness S were 500 emu/cc and 0.5, respectively.(omitted)