• Transactions on Electrical and Electronic Materials
• /
• v.13 no.4
• /
• pp.171-176
• /
• 2012

As langasite $A_3BC_3D_2O_{14}$ compounds with piezoelectric properties exhibit no phase transition up to the melting point of 1,400-$1,500^{\circ}C$, many high temperature applications are expected for the SAW filter, temperature sensor, pressure sensor, and so on, based on the digital transformation of wider bandwidth and higher-bit rates. It has a larger electromechanical coupling factor compared to quartz and also nearly the same temperature stability as quartz. The $La_3Ga_5SiO_{14}$ (LGS) crystal with the $Ca_3Ga_2Ge_4O_{14}$-type crystal structure was synthesized and the crystal structure was analyzed by Mill et al. It is also an important feature that the growth of the single crystal is easy. In the case of three-element compounds such as $[R_3]_A[Ga]_B[Ga_3]_C[GaSi]_DO_{14}$ (R=La, Pr and Nd), the piezoelectric constant increases with the ionic radius of R. In this study, crystal structures of four-element compounds such as $[A_3]_A[B]_B[Ga_3]_C[Si_2]_DO_{14}$ (A = Ca or Sr, B = Ta or Nb) are analyzed by a single crystal X-ray diffraction, and the mechanism and properties of the piezoelectricity depending on the species of cation was clarified based on the crystal structure.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.1
• /
• pp.9-23
• /
• 2007

To investigate the degree of pollution using the species composition of benthic community and environments, the present study was conducted in Jinhae Bay, May of 1998. In Jinhae Bay, benthic macrofaunal community was investigated on the base of the samples from 67 stations. The main facies of the surface sediment was silty clay and clay. The total species number and the mean density of macrobenthic animals were 255 species and 984 $ind./m^2$, respectively. There were 90 species and 773 $ind./m^2$ of polychaetes as the most major faunal group in Jinhae Bay. At the region between the eastern mouth of Jinhae Bay and Gadeok Is., the species number and density were higher, while lower at the western area of Jinhae Bay. The most dominant benthic macrofauna in Jinhae Bay was the polychaetes, Lumbrineris longifolia(16.9%), and followed by polychaetes Tharyx sp.(6.7%), Clone teres(4.7%), Glycinde sp.(4.2%), bivalves Theora fragilis(4.0%), crustaceans Corophium sp.(4.0%) and so on. The most of the predominant species appeared mainly on the region between the eastern mouth of Jinhae Bay and Gadeok Is. Cluster analysis based on the macrobenthic faunal composition showed that Jinhae Bay could be divided into three station groups: The western Jinhae Bay(Station group A), the mouth of Jinhae Bay(Station groupe B), and offshore area between Gadeok Is. and Geoje Is.(Station group C). The mouth of Jinhae Bay had the highest mean species number and the mean density, and its important species was Lumbrineris longifolia. The offshore area between Gadeok Is. and Geoje Is. had medium mean species number and the mean density. The western Jinhae Bay had the lowest mean species number and the mean density. The distribution of BPI and BC values, used to assess benthic pollution, showed similar patterns. According to the classification proposed by Borja et al.(2000), the stations of the western inner-bay were heavily polluted sites, the stations between mouth of the bay and the offshore area were slightly polluted sites, and the stations of the other area were meanly polluted sites. Benthic community healthiness of the western Jinhae Bay was classified to 'Transitional to pollution' by BC values. The degree of pollution in Jinhae Bay may have extended gradually from the western Jinhae Bay to the mouth of the bay.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.5
• /
• pp.292-303
• /
• 2021

PURPOSE. The aim of this in vitro study was to evaluate the effect of silane and universal adhesive applications on the micro-shear bond strength (µSBS) of different resin-matrix ceramics (RMCs). MATERIALS AND METHODS. A total of 120 slides (14 × 12 × 1 mm) were produced from 5 different RMC materials (GC Cerasmart [GC]; Brilliant Crios [BC]; Grandio blocs [GB]; Katana Avencia [KA]; and KZR-CAD HR 2 [KZR]) and sandblasted using 50 ㎛ Al₂O₃ particles. Each RMC material was divided into six groups according to the surface conditioning (SC) method as follows: control (G1), silane primer (G2), silane-free universal adhesive (G3), silane-containing universal adhesive (G4), silane primer and silane-free universal adhesive (G5), and silane primer and silane-containing universal adhesive (G6). Three cylindric specimens made from resin cement (Bifix QM) were polymerized over the treated surface of each slide (n = 12). After thermal cycling (10000 cycles, 5 - 55℃), µSBS test was performed and failure types were evaluated using a stereomicroscope. Data were analyzed using 2-way ANOVA and Tukey tests (α = .05). RESULTS. µSBS values of specimens were significantly affected by the RMC type and SC protocols (P < .001) except the interaction (P = .119). Except for G2, all SC protocols showed a significant increase in µSBS values (P < .05). For all RMCs, the highest µSBS values were obtained in G4 and G6 groups. CONCLUSION. Only silane application did not affect the µSBS values regardless of the RMC type. Moreover, the application of a separate silane in addition to the universal adhesives did not improve the µSBS values. Silane-containing universal adhesive was found to be the best conditioning method for RMCs.

• Korean Journal of Materials Research
• /
• v.25 no.5
• /
• pp.226-232
• /
• 2015

High temperature plasma coating technology has been applied to recover damaged aluminum dies from wear by spraying pure aluminum and alumina powder. However, the coated mixed powder layer composed of aluminum and alumina often undergoes a detachment from the substrate, making the coated substrate die unable to maintain its expected life span. In this study, in order to increase the bonding strength between the substrate and the coating layer, a pure aluminum layer was applied as an intermediate bond layer. In order to prepare the specimen with variable bond coating conditions, the bond coat layers with a various gun speed from 10 cm/sec to 30 cm/sec were prepared with coating cycle variations ranging from three to nine cycles. The specimen with a bond coat layer coated with a gun speed of 20 cm/sec and three coating cycles exhibited ~13MPa of adhesion strength, while the specimen without a bond coat layer showed ~6 MPa of adhesion strength. The adhesion strength with a variation of bond coat layer thickness is discussed in terms of coating parameters.

• Journal of Sensor Science and Technology
• /
• v.6 no.5
• /
• pp.423-429
• /
• 1997

We fabricated PLT thin films on ITO substrate for flat pannel display and investigated the characteristics, then we applicated to electroluminescent device and investigated application possibility. When we fabricated PLT thin films with substrate temperature of $500^{\circ}C$, and pressure of 30 mTorr, the relative deielectric constant and breakdown electricfield of PLT thin films were 120 and 3.2MV/cm. The electric resistivity was $2.0{\times}10^{12}{\Omega}{\cdot}cm$. PLT thin films had polycrystal structure of perovskite and pyrochlore at the higher substrate temperature than $450^{\circ}C$, and had good crystallinity at higher pressure. To use PLT insulator film and ZnS:Mn phosphor, we fabricated thin film electroluminescent device of ITO/PLT/ZnS:Mn/PLT/Al structure. At the result, threshold voltage was $35.2V_{rms}$ and brightness was $2400cd/m^{2}$ at $50V_{rms}$ and 1kHz. Maximum luminescence efficiency was 0.811m/W.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.3
• /
• pp.254-261
• /
• 2005

The over-expression of Bcl-2 has greatly improved the culture period, specific growth rate, and maximum viable cell density of NS0 cells culture under low serum condition. Further analysis of these data suggests that a saturation model of the Monod type can be used to represent the relationships of specific growth rate and initial serum concentration. The ${\mu}_{max}$ and $K_s$ for the Bcl-2 cell line is $0.927day^{-1}\;and\;0.947\%(v/v)$ respectively, which are $21\%$ greate and $7\%$ lower respectively than its control counterpart. Study on the amino acid supplementation revealed that Bcl-2 cell lines possess greater improvement in the specific growth rate and maximum viable cell density compared to the control cell lines. A further increase in the amino acid supplementation has resulted a $17\%$ decrease in specific growth rate and no improvement in maximum viable cell density in the control culture. However, the Bcl-2 cell line exhibited a better growth characteristic in this culture condition compared to that of control cell lines. The higher specific growth rate and maximum viable cell density of the Bcl-2 cell line in medium fortified with serum and MEM EM suggested a more efficient nutrient metabolism compared to that in the control cell line. The low serum and amino acid utilisation rate and the higher cell yield may prove to be important in the development of serum/protein free culture.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3595-3600
• /
• 2016

Background: To investigate the association between preoperative pathological Ki-67 labeling index and serum tumor marker cancer antigen 15-3 (CA 15-3) with clinic-pathological parameters and treatment outcomes in early breast cancer. Materials and Methods: A retrospective study at 4 cancer centers in Saudi Arabia and Egypt was performed. Data were collected for female patients diagnosed with unilateral early breast cancer between March 2010 and October 2013. Cases treated with neoadjuvant chemotherapy (NACT) followed by surgery and radiotherapy were included. NACT included 6-8 cycles of anthracycline and taxane based regimens. Trastuzumab and hormonal treatments were added according to HER2 and hormone receptor status. Baseline serum CA15.3 and pathological Ki67 levels were evaluated and correlated with disease free survival (DFS) and overall survival (OS). Results: A total of 280 pts was included. The median age was 49 years (38-66 y) and median overall survival was 35 (20-38) months (mo). Estrogen receptors (ER), progesterone receptors (PR) and HER 2 receptors were positive in 233 (83.2%), 198 (70%) and 65 cases (23.2%), respectively. High preoperative Ki67 and CA15.3 were noted in 177 (63.2%) and 131 (46.8%). A total of 45 (16%) patients had distal or local recurrence and 24 (8.6%) died of their disease. Most of the relapsed cases had high preoperative Ki-67 (n=41, 91%) and CA15.3 (n=28, 62%) values. All of the patients who died had a high Ki-67 but CA15.3 was high in 9 (37%) only. Mean DFS/OS in patients with high preoperative Ki-67 was 32 months /32 months as compared to 37 months/35 months in those with normal Ki-67 (p<0.001). Correlation of preoperative CA15.3 and survival was statistically not significant. Conclusions:Preoperative Ki-67 can be a predictive and prognostic marker. Higher levels are associated with poor DFS and OS in patients with early BC.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.4
• /
• pp.385-396
• /
• 2012

Jeju island is the biggest volcanic island in Korea and there are over 455 Quaternary monogenetic volcanoes, of which approximately 373 volcanoes(82.0%) are cinder cones. Other volcanic forms in the island include sharp-pointed lava cone without crater(9 volcanoes; 2.0%), shield volcanoes(27 volcanoes; 5.9%), tuff rings(17 volcanoes; 3.7%), tuff cones(3 volcanoes; 0.7%), a maar(1 volcano; 0.2%) and lava domes(25 volcanoes; 5.5%). The monogenetic volcanoes include 15 small nested cinder cones(aloreum). The monogenetic volcanoes are more abundant in the eastern part of the island than in the western part. If the main cause of the weathering such as precipitation affected the shape of the monogenetic volcanoes, more monogenetic volcanoes(BC, CC, DC, etc.) are supposed to be present in the southern part that have more precipitation than in the northern part. But the distribution of the monogenetic volcanoes shows no difference between the southern and the northern parts. So we suggest that the difference of the climatic conditions did not affect the distribution or the shape of cinder cones. Tuff rings, tuff cones and a maar are distributed beneath the island or in the low-altitude areas along the shore although cinder cones are distributed in the interior of the island. This means that the volcanic activity which formed the monogenetic volcanoes resulted from either phreatomagmatic eruption or magmatic (hawaiian or strombolian) eruptions depending on the reaction with water (underground water or shallow waters). The distribution of the monogenetic volcanoes according to the altitude shows that 253(55.6%) volcanoes occur in low-lying coastal areas at an altitude below 300 m, 110(24.2%) in a middle mountainous area at an altitude between 300~600 m and 92(20.2%) in a high mountainous area at an altitude above 600 m. So more than half of monogenetic volcanoes are distributed in low-lying coastal areas.