• Asian Pacific Journal of Cancer Prevention
• /
• 제15권11호
• /
• pp.4555-4561
• /
• 2014

Background: Silencing due to methylation of suppressor of cytokine signaling-3 (SOCS-3), a negative regulator gene for the JAK/STAT signaling pathway has been reported to play important roles in leukemogenesis. Imatinib mesylate is a tyrosine kinase inhibitor that specifically targets the BCR-ABL protein and induces hematological remission in patients with chronic myeloid leukemia (CML). Unfortunately, the majority of CML patients treated with imatinib develop resistance under prolonged therapy. We here investigated the methylation profile of SOCS-3 gene and its downstream effects in a BCR-ABL positive CML cells resistant to imatinib. Materials and Methods: BCR-ABL positive CML cells resistant to imatinib (K562-R) were developed by overexposure of K562 cell lines to the drug. Cytotoxicity was determined by MTS assays and $IC_{50}$ values calculated. Apoptosis assays were performed using annexin V-FITC binding assays and analyzed by flow cytometry. Methylation profiles were investigated using methylation specific PCR and sequencing analysis of SOCS-1 and SOCS-3 genes. Gene expression was assessed by quantitative real-time PCR, and protein expression and phosphorylation of STAT1, 2 and 3 were examined by Western blotting. Results: The $IC_{50}$ for imatinib on K562 was 362nM compared to 3,952nM for K562-R (p=0.001). Percentage of apoptotic cells in K562 increased upto 50% by increasing the concentration of imatinib, in contrast to only 20% in K562-R (p<0.001). A change from non-methylation of the SOCS-3 gene in K562 to complete methylation in K562-R was observed. Gene expression revealed down-regulation of both SOCS-1 and SOCS-3 genes in resistant cells. STAT3 was phosphorylated in K562-R but not K562. Conclusions: Development of cells resistant to imatinib is feasible by overexposure of the drug to the cells. Activation of STAT3 protein leads to uncontrolled cell proliferation in imatinib resistant BCR-ABL due to DNA methylation of the SOCS-3 gene. Thus SOCS-3 provides a suitable candidate for mechanisms underlying the development of imatinib resistant in CML patients.

• Reproductive and Developmental Biology
• /
• 제31권1호
• /
• pp.43-48
• /
• 2007

본 연구는 인공수정 기법을 이용한 칡소의 증식효율을 검토하고자 칡소 종모우의 정액을 채취하여 종모우별 정액성상, 동결융해 후 정액의 특성, 수태율 평가를 위한 체외수정 및 인공수정 후 수태율과 송아지의 모색 분포 등에 대하여 검토하였다. 정액은 호반모를 가진 수컷 6두에서 채취하였으며, 동결 융해 후 체외수정을 실시하였다. 총 18두의 칡소 및 일반 한우 암컷에 인공수정 후 수태율을 확인하였고, 생산된 40두의 송아지를 대상으로 모색을 분석하였다. 칡소 정액의 동결 전 일반 성상은 개체 간에 차이가 없었으며, 동결 후의 생존율과 활력에서도 개체별 차이가 없었다. 체외수정에 의한 수정 능 분석 결과, 수정율에는 차이가 없었으나 배반포 발육율이 일반 한우에 비하여 칡소 정액 체외수정 시 25.9%로 유의하게 높았다(p<0.05). 인공수정 후 임신율에는 일반 한우와 칡소 간에 차이가 없었다. 칡소 정액의 인공수정 후 태어난 송아지의 모색 표현형은 40두의 송아지 중 호반모(Tiger)가 17두(42.5%)로, 황흑모, 흑황모, 흑모 및 황모에 비하여 높았으나 전체적으로 낮은 발현율을 나타내었다. 또한 호반모 암컷에 인공수정한 경우에도 55%의 송아지만 호반모로 발현되었다. 이상의 결과는 인공수정에 의한 칡소의 증식이 가능하나 호반모 칡소의 발현 빈도를 높이기 위한 연구가 필요할 것으로 사료된다.

• 대한가정학회지
• /
• 제41권10호
• /
• pp.101-116
• /
• 2003

The study was conducted to establish hygienic standards of salad items for pizza restaurant located in Seoul by applying HACCP system during the summer of 2000. The study measured temperature, time, pH, Aw and microbial assessments. The hygienic conditions of the kitchen and workers were on the average(1.21, 1.0 out of 3 pts.), but some improvement should be made: separate use of trash can and leftover disposal, separate use of knives and cutting boards, habits for hand washing and wearing hygienic gloves. For salad production, all procedures were peformed under food safety danger zone ($5{\~}60^{\circ}C$). The ingredients were mostly above pH 5.0 and high in Aw($0.94{\~}0.99$). Microbial assessments for salad production revealed that TPC($1.8{\times}10^3{\~}1.0{\times}10^{10}CFU/g$) and coliforms($1.5{\times}10{\~}5.2{\times}10^5 CFU/g$) exceeded the standards by Solberg et al.(TPC: $10^6CFU/g$, coliforms: $10^3CFU/g$). S. aureus was not detected but Salmonella was found in three food items(egg, macaroni and macaroni salad). Moreover, the workers' hands contained 3.1 104 CFU/g of TPC and 4.2 102 CFU/g of S. aureus requiring further remedy since it exceeded the safety standards suggested by Harrigan and McCance (500 CFU/g of TPC per $100cm^2$ and 10 CFU/g of coliforms per $100cm^2$). According to the critical control point(CCP) decision tree analysis, vegetable receiving, vegetable holding, mixing, display on coleslaw, macaroni draining, display on macaroni salad, egg peeling & cutting, apple cutting, and display on salad bar were determined as CCPs. From the findings it would be suggested that purchase of Quality materials, short holding and display time, storing food at right temperature, using sanitary cooking utensils, and improvement of workers' food handing practices are needed to ensure the safe salad production in this specific pizza restaurant.

• 한국식품저장유통학회지
• /
• 제12권6호
• /
• pp.656-661
• /
• 2005

목초액을 천연보존료로 이용하기 위하여 기계식전용 탄화로에서 제조된 목초액을 대상으로 이화적인 특성 및 휘발성분의 함량을 분석하여 다음과 같은 결과를 얻었다. 목초액은 pH, 비중, 산도, 굴절률, 투과률은 각각 2.40, 1.020, $0.8\%$, $1.354\%$, $89.05\%$이었고, 용해타르 및 작열잔사는 각각 $2.31\%,\;0.008\%$이었다. 한편 무기성분은 Al 0.11, Cu 4.13, Fe 2.92, Mn 0.15, Zn 4.37, Ca 3.49, K 5.89, Mg 0.43, Na 6.88 mg/L 함유하고 있었으나 유해중금속인 Pb, Cd, As, Hg, Cr 등은 검출되지 않았다. GC-MS에 의한 목초액의 성분을 분석한 결과 유기성 분획에 함유된 화합물은 ketones 및 diketone계 화합물이 5,472.3 ${\mu}g/100mg$, phenol류가 5,170.3 ${\mu}g/100mg$, methoxyphenol 화합물이 6,002.7 ${\mu}g/100mg$, dimethoxyphenol 화합물이 5,790.7 ${\mu}g/100mg$, furan 및 pyran 화합물이 5,604.5 ${\mu}g/100mg$, pyrocatechol류가 4,790.3 ${\mu}g/100mg$ 함유되어 있었다. 성분별로는 2, 6-dimethoxyphenol (syringol) 3,453 ${\mu}g/100mg$으로 가장 높은 함량을 나타냈고, 2-hydroxy-2-cyclopenten-1-one 2,480.3 ${\mu}g/100mg$, catechol 2,097.5 ${\mu}g/100mg$, Phenol 2,037.2 ${\mu}g/100mg$, 2(5H)-furanone 1,826.7 ${\mu}g/100mg$, 2-methoxyphenol (guaiacol) 1,812.9 ${\mu}g/100mg$, 5-hydro-2-furancarboxaldehyde (HMF) 1,636.8 ${\mu}g/100mg$함유되어 있었다. 수용성 분획에서는 catechol 501.2 ${\mu}g/100mg$, cyclopropyl carbinol 442.0 ${\mu}g/100mg$, 2-hydroxy-2-cyclopenten-1-one 270.0 ${\mu}g/100mg$, 5-hydro-2-furancarboxaldehyde 120.5 ${\mu}g/100mg$, 1,4:3,6-dianhydro-$\alpha$-d-glucopyranose 121.9 ${\mu}g/100mg$ 함유되어 있었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.48.1-48.8
• /
• 2016

Background: This study investigates the effect of alendronate-treated osteoblasts, as well as the effect of low-level laser therapy (LLLT) on the alendronate-treated osteoblasts. Bisphosphonate decreases the osteoblastic activity. Various treatment modalities are used to enhance the bisphosphonate-treated osteoblasts; however, there were no cell culture studies conducted using a low-level laser. Methods: Human fetal osteoblastic (hFOB 1.19) cells were treated with $50{\mu}M$ alendronate. Then, they were irradiated with a $1.2J/cm^2$ low-level Ga-Al-As laser (${\lambda}=808{\pm}3nm$, 80 mW, and 80 mA; spot size, $1 cm^2$; NDLux, Seoul, Korea). The cell survivability was measured with the MTT assay. The three cytokines of osteoblasts, receptor activator of nuclear factor ${\kappa}B$ ligand (RANKL), osteoprotegerin (OPG), and macrophage colony-stimulating factor (M-CSF) were analyzed. Results: In the cells treated with alendronate at concentrations of $50{\mu}M$ and higher, cell survivability significantly decreased after 48 h (p < 0.05). After the applications of low-level laser on alendronate-treated cells, cell survivability significantly increased at 72 h (p < 0.05). The expressions of OPG, RANKL, and M-CSF have decreased via the alendronate. The RANKL and M-CSF expressions have increased, but the OPG was not significantly affected by the LLLT. Conclusions: The LLLT does not affect the OPG expression in the hFOB cell line, but it may increase the RANKL and M-CSF expressions, thereby resulting in positive effects on osteoclastogenesis and bone remodeling.

• 대한치과보철학회지
• /
• 제39권2호
• /
• pp.157-170
• /
• 2001

The bond strength is the most important factor in establishing long-term success of resin-retained fixed prostheses. So, various surface treatment methods have been introduced to improve the bond strength of metal surface and bonding resin till now This study was performed to compare the effect of silicoating with that of metal primer and analyze the correlation between treatment time of sandblasting and the bond strength, so that meant to find more effective surface treatment method that could enhance the bond strength of resin-retained fixed prostheses. The surfaces of all specimens made of $Verabond^{(R)}$ alloys were air abraded with $250{\mu}m\;Al_2O_3$ according to treatment time of sandblasting and they were subdivided to be treated with only sandblasting(S group), silicoating following sandblasting(SS group) and metal primer application after sandblasting(SM group). Then pairs of metal specimens (${\phi}10mm{\times}h\;2mm,\;{\phi}6{\times}h\;2mm$) were bonded with Super bond $C&B^{(R)}$. The specimens were stored in $38^{\circ}C$ water for 48 hours and shear bond strength was measured using the universal testing machine. The results were as follows, 1. In the comparison of shear bond strength according to treatment time of sandblasting, bond strength was increased in the order of 0', 15', 30', 45', 60' group. 0' group had significantly lower value than any other, while 0', 15' group were significantly different with 30', 45', 60' group(p<0.05). 2. In the comparison of shear bond strength according surface treatment methods, bond strength was increased in the order of S group. SS group and SM group. S group was significantly different with SS group and SM group(p<0.05). 3. Observing the mode of bond failure. 0', 15' group showed only adhesive failure, and 30', 45', 60' group did mostly adhesive & cohesive failure in S group. In SS group and SM group, all other groups except 0', 15' group showed mostly cohesive failure. From the above results, it is considered that sandblasting should be treated for more than 30 seconds, and metal primer be more effective and available clinically than silicoater system which is complicate, technique-sensitive and time-consuming method, when nonprecious metal surface is planning be treated with in order enhance the bond strength of resin-retained fixed prostheses.

• 대한소아치과학회지
• /
• 제34권3호
• /
• pp.390-397
• /
• 2007

어린이의 치과불안도를 측정하고자 전주와 익산 3개 초등학교 2학년 어린이 213명을 대상으로 치과치료장면을 그리게 하였고, 보조적으로 설문조사를 시행하였다. 수정된 Sheskin 방법에 의하여 그림을 분석하고 치과불안도(Dental Anxiety Scale, DAS) 점수를 산출하였다. 치과불안도의 점수별 분포는 최저치 0점과 최고치 6점 사이에서 2점이 29.1%로서 가장 많았고, 평균치는 2.00이었다. 치과치료 경험이 없는 어린이들의 치과불안도 평균 점수는 2.82로서 경험이 있는 어린이들의 점수 1.92보다 유의성 있게 높게 나타났다(P<0.05). 남아의 치과불안도 평균 점수는 2.00점, 여아는 1.99로서 유의한 차이는 없었다. 치과치료시 심한 공포를 경험한 어린이들의 비율은 8.2%이었고, 심한 동통을 경험한 어린이들의 비율은 5.6%이었다. 치과치료에 대해 약간 혹은 매우 부정적인 태도를 나타낸 어린이들의 비율은 19.9%, 치과의사에 대해 약간 혹은 매우 부정적인 태도를 나타낸 어린이들의 비율은 4.6%로서 치과의사보다 치과치료에 대해 보다 부정적인 태도를 나타냈다.

• Reproductive and Developmental Biology
• /
• 제38권4호
• /
• pp.147-158
• /
• 2014

Differentiated nuclei can experimentally be returned to an undifferentiated embryonic status after nuclear transfer (NT) to unfertilized metaphase II (MII) oocytes. Nuclear reprogramming is triggered immediately after somatic cell nucleus transfer (SCNT) into recipient cytoplasm and this period is regarded as a key stage for optimizing reprogramming. In a recent study (Dai et al., 2010), use of m-carboxycinnamic acid bishydroxamide (CBHA) as a histone deacetylase inhibitor during the in vitro early culture of murine cloned embryos modifies the acetylation status of somatic nuclei and increases the developmental competence of SCNT embryos. Thus, we examined the effects of CBHA treatment on the in vitro preimplantation development of porcine SCNT embryos and on the acetylated status of histone H3K9 on cloned embryos at the zygote stage. We performed the three groups SCNT: SCNT (NT), CBHA treatment at the porcine fetus fibroblast cells (PFFs) used as donor cells prior to SCNT (CBHA-C) and CBHA treatment at the porcine SCNT embryos during the in vitro early culture after oocyte activation (CBHA-Z). The PFFs were treated with a $15{\mu}M$ of CBHA (8 h) for the early culture and the porcine cloned embryos were treated with a $100{\mu}M$ concentration of CBHA during the in vitro early culture (10 h). Cleavage rates and development to the blastocyst stage were assessed. No significant difference was observed the cleavage rate among the groups (82.6%, 76.4% and 82.2%, respectively). However, the development competence to the blastocyst stage was significantly increased in CBHA-Z embryos (22.7%) as compared to SCNT and CBHA-C embryos (8.6% and 4.1%)(p<0.05). Total cell numbers and viable cell numbers at the blastocyst stage of porcine SCNT embryos were increased in CBHA-Z embryos as compared to those in CBHA-C embryos (p<0.05). Signal level of histone acetylation (H3K9ac) at the zygote stage of SCNT was increased in CBHA-Z embryos as compared to SCNT and CBHA-C embryos. The results of the present study suggested that treatment with CBHA during the in vitro early culture (10 h) had significantly increased the developmental competence and histone acetylation level at the zygote stage.

• Archives of Plastic Surgery
• /
• 제37권5호
• /
• pp.555-560
• /
• 2010

Purpose: Facial allotransplantation (FA) could provide an excellent alternative to current treatments for facial disfigurement. However, despite being technically feasible, there continues to be various ethical and psychosocial issues associated with the risks and benefits of performing FA. The purpose of this study is to investigate risk acceptance and expectations in FA. Methods: In a quantitative assessment of risk versus benefit with respect to FA, from 2004 to 2008, Barker et al. developed and published a questionnaire-based instrument (Louisville Instrument for Transplantation [LIFT]), which contained 237 standardized questions. In the current study, the authors assessed risk versus benefits and expectations of FA using a Korean version of the LIFT. Respondents in three study groups (lay public, n=140; medical students, n=120; doctors, n=34) were questioned about risk acceptance as related to immunosuppression and tissue rejection, and expectations as related to quality of life improvement, and functional and aesthetic outcomes. A summary of the data has been provided and statistical analyses were performed. Results: Among the three study groups, results indicated that doctors accept the least amount of risk for a facial allotransplant, followed by medical students, and finally lay public. There was a significant statistical difference in three of the four questions regarding risk acceptance between the groups (p < 0.05). In general, lay public exhibited higher expectations for facial allotransplantation than the other groups. Additionally, there was a significant statistical difference in the importance of aesthetic outcome between the groups (p < 0.05). Conclusion: The authors' data indicate the three populations have vastly different levels of risk acceptance and expectations with regard to FA. Therefore, it is very important that surgeons establish clear, open, and thorough communication with patients in their consultations regarding FA. This is particularly important with respect to whether or not a patient's level of risk acceptance and expectations are progmatic.

• 한국지구과학회지
• /
• 제28권7호
• /
• pp.789-802
• /
• 2007

이 논문에서는 한국과 일본의 초등 예비교사들이 가지고 있는 천문학 기초개념에 대한 이해 정도와 천문학에 대한 태도를 조사하여 비교하였다. 천문학 기초개념 및 지식은 1998년에 천문교육연구협의회(The Collaboration for Astronomy Education Research, CAER)에서 개발한 천문학진단검사지(Astronomy Diagnostic Test, ADT ver.2.0)의 21문항에서 한일 양국의 중등학교 교육과정을 고려하여 선정한 12개 문항을 양국의 언어로 번안하여 투입하였다. 천문학 기초개념 및 지식에 대한 검사문항의 신뢰도는 0.69이었다. 천문학 태도에 대한 검사는 제일릭 등(Zeilik et at., 1999)이 개발한 천문학태도조사지(the Survey of Attitudes Towards Astronomy, SATA)를 그대로 번역하여 사용하였다. 신뢰도는 0.87이었다. 조사 결과 천문학 기초개념에 대한 한국의 예비교사들의 정답률은 38%이었고 일본은 37%이었지만, 통계적으로 유의미한 차이는 없었다. 천문학에 대한 태도에서는 한국의 초등 예비교사가 일본보다 높았다. 특히 천문학에 대한 인지적 능력과 가치의 범주는 통계적으로 유의미한 차이가 있었다(p<.05). 이 연구를 통해 부가적으로, 한국과 일본의 초등 예비교사들의 가진 천문학 기초개념이 지식의 수준이 40%, 미만이었으며, 천문학에 대한 태도 점수가 미국의 대학생들에 비하여 상당히 낮다는 점을 발견할 수 있었다.