• 한국주조공학회지
• /
• 제22권1호
• /
• pp.42-48
• /
• 2002

Effects of coating treatment of metallic Cu, Ni-P film on $SiC_p$, for $SiC_p$/iron aluminide composites were studied. Porous hybrid preforms were fabricated by reactive sintering after mixing the coated $SiC_p$, Fe and Al powders. Then the final composites were manufactured by squeeze casting after pouring AC4C Al alloy melts in preforms. The change of reactive temperature, density, microstructure of the preforms and microstructure of the composites were investigated. The exprimental results were summarized as follows. The thickness of Cu and Ni-P metallic layer formed on $SiC_p$ by electroless plating method were about $0.5{\mu}m$ and coated uniformly. There was no remakable change in the ignition temperature with variation of the mixing ratio of Fe and Al powder while in the case of coated $SiC_p$ it was lower about $20^{\circ}C$ than in the non-coated $SiC_p$. The maximum reaction temperature increased with increasing Al contents, but decreased with increasing $SiC_p$ contents. Expansion ratio of preform after reactive sintering increased with amount of Cu coated $SiC_p$. In the case of Fe-70at.%Al, the expansion ratio was about 7% up to 8wt.% of $SiC_p$, addition but further addition of $SiC_p$, increased the ratio significantly. And in the case of Fe-50 and 60at.%Al, it was about 20% up to 16wt.% of $SiC_p$ addition and about 28% in 24wt.% of $SiC_p$, addition. The microstructures of compounds showed that the grains became finer as amount of $SiC_p$, and mixing ratio of iron powder increased and the shape of compounds was changed gradually from irregular to spheroidal.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권1호
• /
• pp.65-69
• /
• 2015

Background: To evaluate the impact of adding taxanes to anthracycline-based regimens in the adjuvant setting in localized young female breast cancer patients on the overall survival (OS) and the disease free survival (DFS). Materials and Methods: This retrospective study included all female breast cancer patients who were candidates for adjuvant chemotherapy presenting to Kasr Al Ainy centre of clinical oncology and Cairo oncology centre (Cairo Cure) in the period from January 2005 till December 2010. Results: Our study included 865 patients, 732 of whom received anthracycline based regimens and 133 taxane based regimens. The mean age of patients was 39 years. After a median follow up of 50 months the median DFS was 48.4 months. Survival analysis indicated that the tumor size (>5cm vs. <5cm) p=0.001), nodal involvement (Yes vs. No) p=0.0001) and pathology (invasive lobular vs. ductal) p=0.048) affected DFS. As regards hormonal status, ER, PR and HER 2neu positive patients had longer DFS (p=0.001, 0.003, 0.106). On multivariate analysis DFS was affected by tumor size and lymph node involvement (p=0.014, 0.007). Subgroup analysis showed improvement in arms treated with taxanes in terms of DFS with positive Her2neu, ER and PR, but this was not statistically significant. Conclusions: Adding adjuvant taxanes to anthracyclines is beneficial for treatment of localized breast cancer among all subgroups, especially higher risk groups. The type of adjuvant chemotherapy regimens and tumor characteristics have direct effects on DFS.

• Composites Research
• /
• 제33권5호
• /
• pp.235-240
• /
• 2020

본 연구에서는 B₄C tile 삽입 B₄C_p/Al7075 하이브리드 복합재의 내충격성을 향상시키기 위하여 B₄C/Al7075 계면의 제어법을 개발하고 제어된 계면의 특성에 관하여 분석하였다. 이를 위해 B₄C 타일 표면에 B₂O₃, Ni, 그리고 Si을 각각 열산화, 무전해도금, 그리고 플라즈마 용사법을 이용하여 코팅하였다. 이후 코팅된 B₄C 타일을 액상 가압법을 이용하여 B₄C/Al7075 복합재 내부에 삽입하여 B₄C tile 삽입 B₄C_p/Al7075 하이브리드 복합재를 제작하였다. 코팅의 효과를 체계적으로 분석하기 위해 계면에너지, 접합 강도, 그리고 내충격성을 측정하였다. 모든 코팅이 계면에너지, 계면강도, 내충격성을 증가시켰으며 특히 B₂O₃ 코팅 시 내충격성이 86.8% 증가하였다. 본 연구는 차세대 경량 장갑, 방탄소재로 주목받고 있는 B₄C/Al 계열 복합재의 성능을 향상시키는 핵심적인 표면처리법을 개발, 분석한 것에 의의가 있다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.175-183
• /
• 2000

The internal residual stresses within the multilayered structure with shan interface induced by the difference in thermal expansion coefficient between the materials of adjacent layers often provide the source of failure such as delamination of interfaces and etc. Recent development of the multilayered structure with functionally graded interface would be the solution to prevent this kind of failure. However a systematic thermo-mechanical analysis is needed fur the customized structural design of multilayered structure. In this study, theoretical model for the thermo-mechanical analysis is developed for multilayered structures of the Al-$SiC_p$ functionally graded composite for electronic packaging. The evolution of curvature and internal stresses in response to temperature variations is presented for the different combinations of geometry. The resultant analytical solutions are used for the optimal design of the multilayered structures with functionally graded interface as well as with sharp interface.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.178-182
• /
• 1991

Contact resistance and contact leakage current of the $Al/TiSi_2/Si$ system are investigated for $N^+\;and\;P^+$ junctions. Titanium disilicide is one of the most common silicides because of its thermal stability, ability, to form selective formation and low resistivity. In this paper, the effect of RTA temperature and Junction implant dose are characterized. The $TiSi_2$ contact resistance to $N^+$ silicon is lower than that of Al to $N^+$ silicon, but $TiSi_2$ of contact resistance to $P^+$ silicon is higher than that of Al to $P^+$ silicon. The $TiSi_2$ of contact leakage current to $N^+\;and\;P^+$ silicon is similar to that of Al contact.

• ETRI Journal
• /
• 제26권5호
• /
• pp.475-480
• /
• 2004

Self-assembled InAs quantum dots (QDs) embedded in an InAlGaAs matrix were grown on an InP (001) using a solid-source molecular beam epitaxy and investigated using transmission electron microscopy (TEM) and photoluminescence (PL) spectroscopy. TEM images indicated that the QD formation was strongly dependent on the growth behaviors of group III elements during the deposition of InAlGaAs barriers. We achieved a lasing operation of around 1.5 ${\mu}m$ at room temperature from uncoated QD lasers based on the InAlGaAs-InAlAs material system on the InP (001). The lasing wavelengths of the ridge-waveguide QD lasers were also dependent upon the cavity lengths due mainly to the gain required for the lasing operation.

• 한국주조공학회지
• /
• 제14권3호
• /
• pp.258-266
• /
• 1994

AC4A $Al/Al_2O_3+SiC_p$ hybrid composites were fabricated by the squeeze infiltration technique. Effect of applied pressure, volume fraction of reinforcement($Al_2O_3$ and SiC) and SiC particle size($4.5{\mu}m$, $6.5{\mu}m$ and $9.3{\mu}m$) on the solidification microstructure of the hybrid composites were examined. Mechanical properties were estimated preliminarly by fractographic observation, hardness measurement and wear test. Results show that the microstructure of the hybrid composites were quite satisfactory, namely revealing relatively uniform distribution of reinforcements and refined matrix. Some aggregation of SiC particle caused by particle pushing was observed especially in the hybrid composites containg in fine particle($4.5{\mu}m$). Refined matrix was attributed to applied pressure and increased nucleation sites with addition of reinforcements. Fractured facet also revealed finer for the hybrid composites possibly due to refined matrix. Hardness and wear resistance increased with volume fraction of reinforcements. For hybrid composites with $9.3{\mu}m$ SiC, hardness was somewhat lower and wear resistance higher than other composites.

• 대한화학회지
• /
• 제13권2호
• /
• pp.149-156
• /
• 1969

$NaAl(OH)_2CO_3$was synthesized using colloidal earth (Allophane) as the starting material and some of its were studied in detail. It was found that Dawsonite was formed in the pH range (pH 12.5~12.0) that the concentration of $HCO_3^-$ was just begun to increase and the presence of $HCO_3^-$ in the product was clarified from the infrared absorption spectrum. The chemical formular of Dawsonite was therefore presumed as $NaAlO (OH) HCO_3$. From toahhe results of X-ray powder diffraction, both peaks at 5.7 $\AA$ and 2.8 $\AA$ were observed, and fibrous crystalline structure was observed from electron micrograph and also found from the microscopic electron diffraction at 5.7 $\AA.$ Therefore the fibrous axis was considered as =Al=O2=Al=O2=Al=(*image) direction. True specific gravity of Dawsonite was 2.44 and its porosity was 91.4%. It was practically insoluble in water, but decomposed in the boiling water to form Pseudo Boehmite. Stable pH range of Dawsonite was about 4.5~11.5. From the results of D.T.A. and T.G.A., it was observed that $CO_2$was liberated at $350^{\circ}C$, and $H_2O$ at $650^{\circ}C$, and converted into strongly hygroscopic $NaAlO_2$, which was easily decomposed in water into $\beta-Al(OH)_3(Bayerite)$ and NaOH.

• 상하수도학회지
• /
• 제12권2호
• /
• pp.99-105
• /
• 1998

This research explored the feasibility of preparing and utilizing a preformed polymeric solution of Al(III) for coagulation in water treatment. Slow base(NaOH) injection into supersaturated aluminum chloride solutions did produce high yields of the type of Al polymers useful to water treatment applications. PACl's characteristic analysis showed that the quantity of polymeric Al produced at value of $r(OH_{added}/Al)=2.2$ was 83% of the total aluminum in solution, as showing maximum contents and precipitate was dramatically increased when r was increased above 2.35. And PACl was stable during sitoring period so aging effect was negligible. Results of the coagulation of Nakdong river waters with three PACls showed that the effectiveness of the three coagulants can be considered as r = 2.2 > r = 2.0 > r = 2.35 which are also the order of higher polymeric aluminum contents. Coagulation results for synthetic water exhibited optimum dose of 0.25mM Al, for three PACls, but above optimum dose, r = 2.0 and 2.2 PACl impaired the coagulation and sedimentation of turbidity and humic acid because of the restabilization of particulate. The effect of pH for on coagulation of Nak Dong River water showed that it had much effect turbidity and TOC removal, especially near pH 7. But pH effect was little for turbidity and TOC removal when r = 2.35 PACl was used for coagulation, that PACl had much more precipitates content.

• 한국세라믹학회지
• /
• 제45권5호
• /
• pp.297-302
• /
• 2008

To direct the evolution of nanostructure and immobilize ${\gamma}-Al_2O_3$ catalyst, nanocrystalline La-doped-$Al_2O_3$ powder were prepared by the sol-gel process with addition of an amphiphilic block copolymer template (pluronic P123: $(poly(ethyleneoxide)_{20}-poly(propyleneoxide)_{70}-poly(ethyleneoxide)_{20})$. The dried gel is amorphous, whereas heating at temperature above $700^{\circ}C$ leads to the formation of nanocrystalline ${\gamma}$ and ${\delta}-Al_2O_3$ and these two phases is kept until $1100^{\circ}C$. ${\alpha}-A1_2O_3 $starts to form at $1200^{\circ}C$ with $LaAl_{11}O_{18}$. The surface morphology and crystal structure has been observed by field emission scanning electron microscope (FE-SEM) and X-ray diffraction (XRD). Solid state $^{27}Al$ MAS NMR indicates two types of local environment, i.e. octahedral and tetrahedral sites. The surface area and pore size was compared among these powders using the BET nitrogen adsorption measurements.