• 대한화학회지
• /
• 제55권3호
• /
• pp.418-429
• /
• 2011

[ $N^1,N^2$ ]bis(3-((3-hydroxynaphthalen-2-yl)methylene-amino)propyl)phthalamide ($H_4L$, 1) 의 새로운 크롬(III), 망간(II), 철(III), 코발트(II), 니켈(II), 구리(II), 루테늄(III) 및 산화 지르코늄(II) 착물을 합성하여 원소분석, 물리적 성질 및 분광학적으로 특성을 규명하였다. 분광학적 결과를 통해 이 리간드는 $[H_4LMX_2(H_2O)]{\cdot}nH_2O$ (M = Cu(II), Ni(II), Co(II), X = Cl 또는 $NO_3$)의 일반식을 갖는 착물2-5에서는 중성의 삼배위 리간드로 행동한다. 또는 $[H_4L(ZrO)_2Cl_2]{\cdot}8H_2O$ 의 일반식을 갖는 착물 6-9 에서는 이염기성 육배위 리간드로 행동한다. DMF 용액에서의 몰전기전도도 실험결과 이들 착물은 비이온성을 나타낸다. 고체 구리착물 2, 5 및 6 의 ESR 스펙트럼에서 $g_{\parallel}$ >g> $g_e$을 보이는데, 이는 일그러진 팔면체구조와 큰 공유결합성을 갖는 $d{_x}^2{_{-y}}^2$ 오비탈에 비공유 전자쌍이 존재함을 의미한다. 이합체 구리(II) 착물 $[H_2LCu_2Cl_2(H_2O)_4]{\cdot}3H_2O$ (6)에 대해 두 구리원자 사이의 거리를 ESR 스펙트럼으로부터 추정한 parallel component 의 field zero splitting 파라메타를 이용하여 계산하였다. 이들 화합물의 항박테리아 및 항균 활성도를 측정한 결과, 몇가지 금속 착물의 경우 표준시약인 tetracycline (박테리아) 및 Amphotricene B (균류)보다 더 큰 저해효과를 보였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제12권7호
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

• 한국정보통신학회논문지
• /
• 제14권3호
• /
• pp.699-706
• /
• 2010

경사진 빗살무늬 변환기 필터를 제작하기 위하여 Langasite 기판위에 두 가지 형태의 빗살무늬 변환기를 형성시켰으며, 전극재료로는 Al-Cu를 사용하였다. 모의실험을 바탕으로 입력단에는 IDT를 직렬형태로 연결시킨 block 형태로 하중을 가하는 전극 방법을 쓰고 출력단은 withdrawal 형태로 하중을 가하는 방법을 써서 제작하였다. 이를 바탕으로 경사진 빗살무늬 변환기 필터 전극 설계 방식에 대한 적절한 위상조건도 얻고자 시도하였다. Langasite 기판위에 형성시킨 입출력 빗살무늬 변환기 전극수는 50쌍, 두께는 $5000\;{\AA}$으로 하였으며, 반사기 폭은 $3.6{\mu}m$으로 하였다. 첫 번째 시료에서 hot전극과 반사기사이의 거리는 $2.4{\mu}m$이고, 접지 전극과 반사기사이의 거리는 $1.8{\mu}m$이며, hot전극에서부터 접지전극까지 간격은 $1.5{\mu}m$로 제작하였다. 두 번째 시료는 hot전극과 반사기사이의 거리 및 접지 전극과 반사가사이의 거리를 $2.4{\mu}m$로 동일하게 제작하였다. 제작한 필터의 주파수 특성은 중심주파수가 대략 190MHz정도, 대역폭은 7.3MHz이하로 측정되었으며, matching 후 return loss는 -20dB 이하이고, 리플 특성은 3dB정도이며, 반사에 의한 잔향은 -22dB 이하로 측정되었다.

• 한국환경과학회지
• /
• 제21권7호
• /
• pp.855-863
• /
• 2012

This study analyzed mass concentrations of TSP, PM10 and PM2.5 and elemental constituents according to the isentropic backward trajectories of air parcel from Cheongwonin East Asia during the period January - October, 2011. Mass concentrations of the continental polluted airflow (CP) showed levels of TSP and PM10 mass concentrations higher than the continental background airflow (CB). Also, PM2.5 mass concentrations of anthropogenic fine particles ran higher in CP than in CB. The elemental constituents and elemental constituent ratio ended up varying depending on the origin of atmospheric aerosols generated. The average absolute content of elemental constituents reached its height in CB, the ratio of anthropogenically originating elements (PE) among the all elements (AE) analyzed marked a high in CP, and Mg+Na/AE reached its height in the oceanic airflow (OA). At the same time, TSP, PM10 and PM2.5 mass concentrations, the ratio of PM2.5/TSP and PE/AE element ratio ran higher in CP than CB. Episodes of large-scale transport of atmospheric pollutants as observed at Cheongwon were 8 cases and 22 days. The ratios of PM10, PM2.5 among TSP mass concentrations showed different results and the ratios of PM2.5 showed an increasing trend in the episodes of anthropogenic air pollution transport. Overall, dustfall episodes show a level of elemental constituents higher than those of anthropogenic air pollution.Dustfall episodes were observed to contain more of Fe, Al and Ca originating from continental soils and those of air pollution were observed to contain more of Zn, Mn, Cu and Pb. By difference in contents of absolute elemental constituents, episodes of anthropogenic air pollution showed a high PE/AE rate, and dustfall episodes a high SE/AE rate.

• Asian Journal of Atmospheric Environment
• /
• 제8권3호
• /
• pp.126-139
• /
• 2014

In order to estimate the influence of sources on $PM_{2.5}$ in the industrial area of Japan, we carried out a source analysis using chemical component data of $PM_{2.5}$. $PM_{2.5}$ samples were collected intermittently at an industrial area in Japan from July 2010 to November 2012. Water soluble ions ($Cl^-$, $NO_3{^-}$, $SO{_4}^{2-}$, $Na^+$,$NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$), elements (Al, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Cd, Sb, Pb), and carbonaceous species (OC, EC) of the $PM_{2.5}$ (a total of 198 samples) were analyzed. Positive Matrix Factorization (PMF) model was applied to the data of those chemical components to identify the source of $PM_{2.5}$. At this observation site, nine factors were extracted. The major contributors of $PM_{2.5}$ were secondary sulfate 1, in which loading factors of $SO{_4}^{2-}$ and $NH_4{^+}$ were large (percentage source contribution: 20.9%), traffic, in which loading factors of OC (organic carbon) and EC (elemental carbon) were large (20.8%), secondary sulfate 2, in which loading factors of K and $SO{_4}^{2-}$ were large (8.0%), steel mills (7.8%), secondary chloride and nitrate (7.0%), soil (5.0%), heavy oil combustion (3.8%), sea salt (3.8%), and coal combustion (2.3%). The conditional probability function (CPF) and the potential source contribution function (PSCF) were carried out to examine the influence of a regional source and a broad-based source, respectively. CPF results supported local source influences such as steel mills, sea salt, traffic, coal combustion, and heavy oil combustion. PSCF results suggested that ships in the East China Sea, an industrial area of the east coastal region of China, and an active volcano in the Kyushu region of Japan were potential regional sources of secondary sulfate 1. Secondary sulfate 2 was affected by the burning of biomass fields and by coal combustion in Chinese urban areas such as Beijing, Hebei, and western Inner Mongolia. Source characterization using continuous data from one site showed a potential source representing fossil fuel combustion is affected both by regional and broad-based sources.

• Korean Chemical Engineering Research
• /
• 제48권5호
• /
• pp.643-648
• /
• 2010

본 연구에서는 이온성 액체인 염화콜린에 5가지의 금속염화물을 첨가하여 루이스산 이온성 액체 촉매를 제조하고, 이 촉매를 사용하여 대두유로부터 바이오디젤을 합성하였다. 먼저 단독의 금속염화물인 염화주석과 염화아연, 염화알루미늄, 염화철(III), 염화구리(I) 촉매에 대하여 363~423 K 온도 범위에서 에스터 교환 반응의 반응성을 조사하였다. 5가지의 금속염화물 중 염화주석이 우수한 촉매 활성을 나타내었고, 이러한 경향과 같이 5가지의 루이스산 이온성 액체 촉매 중 $[Me_3NC_2H_4OH]Cl-2SnCl_2$의 촉매가 403 K에서 14시간 동안 유지:메탄올:촉매의 몰 비율 1:12:0.9인 조건으로 최대 91.1%의 높은 반응수율을 나타내었다. 단독의 염화주석 촉매와는 달리, $[Me_3NC_2H_4OH]Cl-2SnCl_2$의 촉매는 반응 후 액체-액체 이상계를 형성하여 반응물과 생성물로부터 쉽게 분리할 수 있으며, 5회 이상 재사용 후에도 활성이 거의 감소하지 않았다. 이러한 결과는 촉매의 수분에 대해 안정성과 강한 루이스 산성도의 특성에 기인한 것으로 생각된다. 또한 촉매에 대한 반응시간과 촉매 및 메탄올 몰 비율 등의 반응변수들에 대한 영향이 조사되었다.

• 한국환경과학회지
• /
• 제23권3호
• /
• pp.447-457
• /
• 2014

The number concentrations, the mass concentrations and the elemental concentrations of $PM_{10}$ have measured at Gosan site in Jeju, Korea, from March 2010 to December 2010. And the correlation and the factor analysis for the number, the mass and the elemental concentrations of $PM_{10}$ are performed to identify their relationships and sources. The average $PM_{10}$ number concentration is observed $246\;particles/cm^3$($35.7{\sim}1,017\;particles/cm^3$) and the average $PM_{10}$ mass concentration is shown $50.1{\mu}g/m^3$($16.7{\sim}441.4{\mu}g/m^3$) during this experimental period. The number concentrations are significantly decreased with increasing particle size, hence the concentrations for the smaller particles less than $2.5{\mu}m$($PM_{2.5}$) are contributed 99.6% to the total $PM_{10}$ number concentrations. The highest concentration of the 20 elements in $PM_{10}$ determined in this study is shown by S with a mean value of $1,497ng/m^3$ and the lowest concentration of them is found by Cd with a mean value of $0.57ng/m^3$. The elements in $PM_{10}$ are evidently classified into two group based on their concentrations: In group 1, including S>Na>Al>Fe>Ca>Mg>K, the elemental mean concentrations are higher than several hundred $ng/m^3$, on the other hand, the concentrations are lower than several ten $ng/m^3$ in group 2, including Zn>Mn>Ni>Ti>Cr>Co>Cu>Mo>Sr>Ba>V>Cd. The size-separated number concentrations are shown positively correlated with the mass concentrations in overall size ranges, although their correlation coefficients, which are monotonously increased or decreased with size range, are not high. The concentrations of the elements in group 1 are shown highly correlated with the mass concentrations, but the concentrations in group 2 are shown hardly correlated with the mass concentrations. The elements originated from natural sources have been predominantly related to the mass concentrations while the elements from anthropogenic sources have mainly affected on the number concentrations of $PM_{10}$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.251-251
• /
• 2016

For several decades, industrial processes consume a huge amount of raw water for various objects that consequently results in the generation of large amounts of wastewater. Wastewaters are consisting of complex mixture of different inorganic and organic compounds and some of them can be toxic, hazardous and hard to degrade. These effluents are mainly treated by conventional technologies such are aerobic and anaerobic treatment and chemical coagulation. But, these processes are not suitable for eliminating all hazardous chemical compounds form wastewater and generate a large amount of toxic sludge. Therefore, other processes have been studied and applied together with these techniques to enhance purification results. These include photocatalysis, absorption, advanced oxidation processes, and ozonation, but also have their own drawbacks. In recent years, electrochemical techniques have received attention as wastewater treatment process that could be show higher purification results. Among them, boron doped diamond (BDD) attract attention as electrochemical electrode due to good chemical and electrochemical stability, long lifetime and wide potential window that necessary properties for anode electrode. So, there are many researches about high quality BDD on Nb, Ta, W and Si substrates, but, their application in effluents treatment is not suitable due to high cost of metal and low conductivity of Si. To solve these problems, Ti has been candidate as substrate in consideration of cost and property. But there are adhesion issues that must be overcome to apply Ti as BDD substrate. Al, Cu, Ti and Nb thin films were deposited on Ti substrate to improve adhesion between substrate and BDD thin film. In this paper, BDD films were deposited by hot filament chemical vapor deposition (HF-CVD) method. Prior to deposition, cleaning processes were conducted in acetone, ethanol, and isopropyl alcohol (IPA) using sonification machine for 7 min, respectively. And metal layer with the thickness of 200 nm were deposited by DC magnetron sputtering (DCMS). To analyze microstructure X-ray diffraction (XRD, Bruker gads) and field emission scanning electron microscopy (FE-SEM, Hitachi) were used. It is confirmed that metal layer was effective to adhesion property and improved electrode property. Electrochemical measurements were carried out in a three electrode electrochemical cell containing a 0.5 % H2SO4 in deionized water. As a result, it is confirmed that metal inter layer heavily effect on BDD property by improving adhesion property due to suppressing formation of titanium carbide.

• 한국식품영양과학회지
• /
• 제11권3호
• /
• pp.67-74
• /
• 1982

나무딸기 과즙으로부터 추출한 anthocyanin 색소의 안정성에 관하여 pH, 온도, 유기산, 무기염, 금속이온 등에 대한 영향을 검토한 결과 특히 유기산과 무기염에 의하여 농색화 효과를 나타내었고 또한 지속적인 안정성을 가지므로 이를 관찰하여 보고한다. (1) 상온에서 pH 1$\sim$7의 완충용액에 나무딸기 과즙 색소 anthocyanin을 가하였을 때 초기흡광도는 pH가 낮을수록 높았으며 7일간 저장 중 색소의 분해속도는 pH 1과 2가 과즙색소의 pH인 3.7보다 더 빨랐다. 총색소의 잔존량은 pH 7.0 에서 가장 낮았고 pH 3.7에서 가장 많았다. (2) 온도에 대한 영향은 $40^{\circ}C$에서 6시간 후 색소 잔존율은 약 28%, $5^{\circ}C$에서 약 70%로써 온도가 낮을수록 색소잔존율이 높았다. (3) 유기산 첨가시 흡광도 변화는 첨가농도 증가와 함께 색소액의 흡광도가 증대되었으며 그 순위는 formic acid>acetic acid>n-butyric acid>propionic acid로 나타났다. Formic acid의 농색화 효과는 40일 저장후 무첨가구보다 약 10.3배이며 tartaric acid 약 4배, malic acid 약 3.9배, citric acid 약 3.8배 등의 순으로 농색화가 관찰되어졌다. (4) 무기염 첨가농도에 따른 anthocyanin의 농색화 효과의 순위는 sodium perchlorate>sodium sulfate>sodium chloride>sodium phosphate, monobasic로 나타났다. (5) 금속이온에 의하여 색소용액은 저장 5일에 크게 감소되었으며 저장중 $Cu^{2+}$, $Al^{3+}$의 감소율이 가장 컸으며 $Fe^{2+}$은 비교적 감소율이 작았다.

• 한국식품저장유통학회지
• /
• 제12권6호
• /
• pp.656-661
• /
• 2005

목초액을 천연보존료로 이용하기 위하여 기계식전용 탄화로에서 제조된 목초액을 대상으로 이화적인 특성 및 휘발성분의 함량을 분석하여 다음과 같은 결과를 얻었다. 목초액은 pH, 비중, 산도, 굴절률, 투과률은 각각 2.40, 1.020, $0.8\%$, $1.354\%$, $89.05\%$이었고, 용해타르 및 작열잔사는 각각 $2.31\%,\;0.008\%$이었다. 한편 무기성분은 Al 0.11, Cu 4.13, Fe 2.92, Mn 0.15, Zn 4.37, Ca 3.49, K 5.89, Mg 0.43, Na 6.88 mg/L 함유하고 있었으나 유해중금속인 Pb, Cd, As, Hg, Cr 등은 검출되지 않았다. GC-MS에 의한 목초액의 성분을 분석한 결과 유기성 분획에 함유된 화합물은 ketones 및 diketone계 화합물이 5,472.3 ${\mu}g/100mg$, phenol류가 5,170.3 ${\mu}g/100mg$, methoxyphenol 화합물이 6,002.7 ${\mu}g/100mg$, dimethoxyphenol 화합물이 5,790.7 ${\mu}g/100mg$, furan 및 pyran 화합물이 5,604.5 ${\mu}g/100mg$, pyrocatechol류가 4,790.3 ${\mu}g/100mg$ 함유되어 있었다. 성분별로는 2, 6-dimethoxyphenol (syringol) 3,453 ${\mu}g/100mg$으로 가장 높은 함량을 나타냈고, 2-hydroxy-2-cyclopenten-1-one 2,480.3 ${\mu}g/100mg$, catechol 2,097.5 ${\mu}g/100mg$, Phenol 2,037.2 ${\mu}g/100mg$, 2(5H)-furanone 1,826.7 ${\mu}g/100mg$, 2-methoxyphenol (guaiacol) 1,812.9 ${\mu}g/100mg$, 5-hydro-2-furancarboxaldehyde (HMF) 1,636.8 ${\mu}g/100mg$함유되어 있었다. 수용성 분획에서는 catechol 501.2 ${\mu}g/100mg$, cyclopropyl carbinol 442.0 ${\mu}g/100mg$, 2-hydroxy-2-cyclopenten-1-one 270.0 ${\mu}g/100mg$, 5-hydro-2-furancarboxaldehyde 120.5 ${\mu}g/100mg$, 1,4:3,6-dianhydro-$\alpha$-d-glucopyranose 121.9 ${\mu}g/100mg$ 함유되어 있었다.