• 대한환경공학회지
• /
• 제22권4호
• /
• pp.671-678
• /
• 2000

열중량분석기와 관형 고정층 반응기에서 $CuO/{\gamma}-Al_2O_3$ 흡수제/촉매의 SOx와 NOx 동시제거 반응특성에 대하여 고찰하였다. $CuO/{\gamma}-Al_2O_3$ 흡수제/촉매의 아황산가스 제거능은 반응온도 $450^{\circ}C$와 담지량 6wt% 이상에서 담체인 알루미나의 반응참여에 의하여 급격히 증가하였다. $CuO/{\gamma}-Al_2O_3$ 흡수제/촉매의 탈질 효율은 반응온도, $370^{\circ}C$에서 최대값을 보였으며 그 이상의 온도에서는 $NH_3$가스의 산화반응에 의하여 반응온도가 증가할수록 제거효율은 감소하였다. 흡수제/촉매 표면에 sulfate가 존재하는 경우 최대 탈질 효율을 보이는 반응온도는 증가하였다. SOx와 NOx 동시 제거반응에서 $CuO/{\gamma}-Al_2O_3$ 흡수제/촉매의 NO제거 활성은 $NH_4HSO_4$와 같은 암모늄염의 생성으로 인하여 크게 감소하였다. SOx와 NOx 동시제거 반응에 있어서 최대의 탈질 효율을 보이는 반응온도는 $SO_2$ 가스의 존재로 인하여 $400^{\circ}C$로 증가하였다.

• 한국주조공학회지
• /
• 제24권1호
• /
• pp.40-44
• /
• 2004

The influence of Pd and Ag additions on the thermal stability, the glass forming ability (GFA) and mechanical property of $Zr_{55}Al_{10}Cu_{20}Ni_{10}Pb_{(5-x)}Ag_x$ (x = $0{\sim}5at%$) alloys obtained by melt spun and injection casting method have been investigated by using of X-ray diffraction, thermal analysis (DTA, DSC) and micro-Vickers hardness(Hv) testing. The thermal properties of melt-spun $Zr_{55}Al_{10}Cu_{20}Ni_{10}Pb_{(5-x)}Ag_x$ (x = $0{\sim}5at%$) alloys exhibit a supercooled liquid region(${\Delta}T_x$) exceeding 91 K before crystallization. The largest ${\Delta}T_x$ reaches as large as 126 K for the $Zr_{55}Al_{10}Cu_{20}Ni_{10}Pb_5$ alloy. The reduced glass transition temperature, $T_{rg}$ increased with increasing Ag content. The largest $T_{rg}$ is obtained for the $Zr_{55}Al_{10}Cu_{10}Ni_{10}Ag_5$ alloy. The $Zr_{55}Al_{10}Cu_{10}Ni_{10}Ag_5$ bulk amorphous alloy rod with 3 mm in diameter was fabricated by injection casting. Hv increased with increasing Ag content and the largest value was obtained for the $Zr_{55}Al_{10}Cu_{10}Ni_{10}Ag_5$ bulk amorphous alloy.

• 유기물자원화
• /
• 제20권3호
• /
• pp.60-70
• /
• 2012

경기도 포천시에 소재하는 몇 군데의 하수처리장에서 채취된 슬러지내의 Zn, Cu, Fe, Al 함량을 측정하고 슬러지를 줄지렁이에게 장기간 급이하면서 이들 금속류의 지렁이 체내 축적량을 조사하였다. 슬러지내 Zn 함량은 75.1~196.1 mg/kg, Cu 함량은 3.74~76.1 mg/kg, Fe 함량은 219.9~857.8mg/kg, Al 함량 198.4~991.7 mg/kg로 나타났다. 이들 금속류의 슬러지내 함량은 줄지렁이에 대하여 단기적으로 직접 치사 독성을 유발할 정도는 아니었으나, 장기적으로는 아독성을 유발할 가능성이 있고 이들 금속류에 의한 산란 및 부화율 억제에 의한 차세대 개체군의 감소 현상을 유발할 것으로 판단된다. 그러나 60g(dw)의 슬러지 급이후 이들 금속류의 지렁이 생체내 축적률(BAF)은 0.0-0.43으로 낮은 경향을 나타내었으며 슬러지를 장기간 급이하여도 슬러지내 Zn, Cu, Fe, Al가 줄지렁이 생체내에 누적적으로 축적되지는 않는 것으로 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제19권1호
• /
• pp.71-76
• /
• 2008

CuFeOx/$Al_2O_3$ catalysts are developed for the use in sulfuric acid decomposition which is a subcycle in thermochemical iodine-sulfur cycle to split water into hydrogen and oxygen. Both Cu and Fe components are co-precipitated with Al component to enhance distribution of active components. Developed catalysts are improved in the capability of sulfuric acid decomposition and endurance under highly acidic environment compared to commercial catalysts such as Pt/$Al_2O_3$ and $2CuO{\cdot}Cr_2O_3$. Developed CuFeAlOx catalysts exhibited higher sulfuric acid decomposition ability than $2CuO{\cdot}Cr_2O_3$ and longer endurance trends than Pt/$Al_2O_3$ maintaining comparable performance, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.226-229
• /
• 2004

A stoichiometric mixture of evaporating materials for $CuAlSe_2$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $CuAlSe_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperatures were $680^{\circ}C$ and $410^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CuAlSe_2$ single crystal thin films measured with Hall effect by van der Pauw method are $9.24{\times}10^{16}\;cm^{-3}$ and $295\;cm^2/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the $CuAlSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)\;=\;2.8382\;eV\;-\;(8.68{\times}10^{-4}\;eV/K)T^2/(T+155K)$. The crystal field and the spin-orbit splitting energies for the valence band of the $CuAlSe_2$ have been estimated to be 0.2026 eV and 0.2165 eV at 10K, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that the splitting of the ${\Delta}so$ definitely exists in the ${\Gamma}_5$ states of the valence band of the $CuAlSe_2$. The three photocurrent peaks observed at 10K are ascribed to the $A_1-$, $B_1-$, and $C_1$-exciton peaks for n = 1.

• 한국분말재료학회지
• /
• 제25권1호
• /
• pp.30-35
• /
• 2018

The friction characteristics of Al-Fe alloy powders are investigated in order to develop an eco-friendly friction material to replace Cu fiber, a constituent of brake-pad friction materials. Irregularly shaped Al-Fe alloy powders, prepared by gas atomization, are more uniformly dispersed than conventional Cu fiber on the brake pad matrix. The wear rate of the friction material using Al-8Fe alloy powder is lower than that of the Cu fiber material. The change in friction coefficient according to the friction lap times is 7.2% for the Cu fiber, but within 3.8% for the Al-Fe alloy material, which also shows excellent judder characteristics. The Al-Fe alloy powders are uniformly distributed in the brake pad matrix and oxide films of Al and Fe are homogeneously formed at the friction interface between the disc and pad, thus exhibiting excellent friction and lubrication characteristics. The brake pad containing Al-Fe powders avoids contamination by Cu dust, which is generated during braking, by replacing the Cu fiber while maintaining the friction and lubrication performance.

• 한국건축시공학회지
• /
• 제21권6호
• /
• pp.519-527
• /
• 2021

본 연구에서는 기존의 전자기파 차폐 성능이 없는 콘크리트를 대상으로 아크 금속용사 공법을 적용하여 전자기파 차폐성능을 확보하고자 한다. 이를 위해 금속 코팅의 두께에 전기적 특성을 평가하기 위해서 8 종류의(Cu, CuAl, CuNi, CuZn, Al, Zn, ZnAl, AlMg) 금속들을 두께 100, 200 및 500㎛의 금속 코팅으로 제작하여 4pin-probe로 표면에서의 전기전도도를 측정하였고, KS C 0304에 의거하여 전자기파 차폐 성능 시험을 실시하였다. 금속 코팅 시험 결과를 토대로 전자기파 차폐를 위한 최적의 금속 코팅 두께 200㎛를 제안하였으며, 이를 300×300×100mm 콘크리트 시험체에 용사하여 전자기파 차폐 성능을 분석한 결과 목표 성능 1GHz에서 80dB의 전자기파 차폐 성능이 확보됨을 확인하였다. 하지만 부착 강도의 경우 최대 1.11MPa로 목표 성능 대비 74% 이하로 확인되어 추후 콘크리트 표면에 미세한 요철을 형성하여 부착 성능을 향상시키는 연구가 필요할 것으로 판단된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.535-536
• /
• 2005

Organic photovoltaic effects were studied in a device structure of ITO/CuPc/Al and ITO/CuPc/$C_{60}$/BCP/Al. A thickness of CuPc layer was varied from 10 nm to 50 nm, we have obtained that the optimum CuPc layer thickness is around 40 nm from the analysis of the current density-voltage characteristics in CuPc single layer photovoltaic cell. From the thickness-dependent photovoltaic effects in CuPc/$C_{60}$ heterojunction devices, higher power conversion efficiency was obtained in ITO/20nm CuPc/40nm $C_{60}$/Al, which has a thickness ratio (CuPc:$C_{60}$) of 1:2 rather than 1:1 or 1:3. Light intensity on the device was measured by calibrated Si-photodiode and radiometer/photometer of International Light Inc(IL14004).

• 한국자기학회지
• /
• 제6권4호
• /
• pp.218-224
• /
• 1996

새로운 고성능 자심용 연자성 합금을 개발하기 위해, 급냉응고 방식에 의해 제조된 $Fe_{83-x}Al_{x}Nb_{5}B_{12}(X=1~5at%)$ 합금의 결정화거동 및 자기적 특성을 조사하였다. 3at% Al의 $Fe_{80}Al_{3}Nb_{5}B_{12}$ 합금이 조사된 Fe-Al-Nb-B계 합금중에서 가장 우수한 연자기 특성을 가지며, 이때 미세한 $\alpha-Fe$상 결정립 조직을 가지는 것으로 판명되었다. 또, 이 조성의 합금에 1 at%의 Cu를 첨가하면, 약 6~7 nm정도의 크기를 가지는 극히 미세한 결정립의 $\alpha-Fe$ 상조직이 얻어졌으며 이에 따라 대단히 현저한 연자기 특성의 향상이 실현되었다. 이때 초미세 결정구조 $Fe_{79}Al_{3}Nb_{5}B_{12}Cu_{1}$ 합금의 자기적 특성은 다음과 같다 : ${\mu}_{eff}(1\;kHz)=26,000,\;B_{10}=1.45\;T,\;H_{c}=25\;mOe,\;P_{c}(100\;kHz,\;0.2\;T)=55\;W/kg$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.271-272
• /
• 2012

Bulk Metallic Glasses (BMGs or amorphous alloy) exhibit high strength and good corrosion resistance. Applications of thin films and micro parts of BMGs have been used a lot since its inception in the research of BMGs. However, Application and fabrication of BMGs are limited to make structural materials. Thin films of BMGs which is sputtered on the surface of structural materials by sputtering process is used to improve limits about application of BMGs. In order to investigate the difference of properties between designed alloys and thin films, we identified that thin films deposited on the surface that have the characteristic of the amorphous films and the composition of designed alloys. Zr-Cu (Cu=30, 35, 38, 40, 50 at.%) and Zr-Cu-Al (Al=10 at.% fixed, Cu=26, 30, 34, 38 at.%) alloys were fabricated with Zr (99.7% purity), Cu (99.997% purity), and Al (99.99% purity) as melting 5 times by arc melting method before rods 2mm in diameter was manufactured. In order to analyze GFA (Glass Forming Ability), rods were observed by Optical Microscopy and SEM and $T_g$, $T_x$, ($T_x$ is crystallization temperature and $T_g$ is the glass transition temperature) and Tm were measured by DTA and DSC. Powder was manufactured by Gas Atomizer and target was sintered using powder in large supercooled liquid region ($=T_x-T_g$) by SPS(Spark Plasma Sintering). Amorphous foil was prepared by RSP process with 5 gram alloy button. The composition of the foil and sputtered thin film was analyzed by EDS and EPMA. In the result of DSC curve, binary alloys ($Zr_{62}Cu_{38}$, $Zr_{60}Cu_{40}$, $Zr_{50}Cu_{50}$) and ternary alloys ($Zr_{64}Al_{10}Cu_{26}$, $Zr_{56}Al_{10}Cu_{34}$, $Zr_{52}Al_{10}Cu_{38}$) have $T_g$ except for $Zr_{70}Cu_{30}$ and $Zr_{60}Al_{10}Cu_{30}$. The compositions with $T_g$ made into powders. Figure shows XRD data of thin film showed similar hollow peak.