• Journal of the Korean Ceramic Society
• /
• v.36 no.7
• /
• pp.734-741
• /
• 1999

Al2O3/t-ZrO2 particulate composites were prepared by sintering at 150$0^{\circ}C$ and 1$600^{\circ}C$ for 2h in air and microstructure and mechanical properties of the composites were investigated. Although most ZrO2 particles existed at Al2O3 grain boundaries a few ZrO2 particles within Al2O3 grains. Al2O3 grain growth was depressed due to the pinning effect by ZrO2 particles. During sintering coarsening of intergranular ZrO2 particles occurred as a results of the elimination of ZrO2 intraagglomerate grain boundaries and the coalescence of dragged ZrO2 particles by migrating Al2O3 grain boundries. Changes in mechanical properties of Al2O3 composites were dependant on microstructure of Al2O3 matrix and on size and structure of dispersed ZrO2.

• Journal of the Korean Ceramic Society
• /
• v.37 no.3
• /
• pp.201-204
• /
• 2000

Thermal shock resistance of 80Al2O3-20Al composite and monolithic alumina ceramics was compared. Fracture strength was measured by using a 4-pont bending test after quenching. Thermal stresses of the ceramics and ceramic-metal composites were calculated using a finite element analysis. The bending strength of the Al2O3 ceramics decreased catastropically after quenching from 20$0^{\circ}C$ to $0^{\circ}C$. The bending strength of the composite also decreased after quenching from 200~2$25^{\circ}C$, but the strength reduction was much smaller than for Al2O3. The maximum thermal stress occured in the monolithic alumina ceramics when exposed to a temperature difference of 20$0^{\circ}C$ was 0.758 GPa. The same amount of stress occured in the Al2O3-Al composite when the temperature difference of 205$^{\circ}C$ used.

• Journal of the Korean Ceramic Society
• /
• v.26 no.2
• /
• pp.210-220
• /
• 1989

The properties of the powder of Al2O3-15v/o ZrO2(＋3m/o Y2O3) system prepared by co-precipitation method at the pH values of 7, 9, 10 and 11 were investigated. Al2(SO4)3.18H2O, ZrOCl2.8H2O and YCl3.6H2O were used as starting materials and NH4OH as a precipitation agent. Zirconium hydroxide decreased the specific surface area of aluminum hydroxide of AlOOH type, while increased the specific surface area of aluminum hydroxide of Al(OH)3 type, and formed co-network structure of Al-O-Zr type with the aluminum hydroxides. The rate of transition to $\alpha$-Al2O3 from co-precipitated materials occurred in the order of 7≒10, 9 and 11 of pH values. Al2O3 and ZrO2 interacted to bring about coupled grain growth, and the growth of ZrO2 crystallite size rapidly occurred within $\theta$-Al2O3 matrix. Segregation did not occur in the system Al2O3-15v/o ZrO2(＋3m/o Y2O3) and Y2O3 acted as a stabilizer to ZrO2. The lattice strain of tetragonal ZrO2 was increased by the constraint effect of Al2O3 matrix.

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.263-270
• /
• 1989

Aluminum alkoxide, $Al(OC_3H_7\^i)_3\;and\;Al(OC_4H_9^s)_3$, were synthesized using aluminum sheet and corresponding alcohols to prepare various phase alumina in high purity. Aluminum hydroxides were prepared by hydrolysis of synthesized Al-alkoxides and from reagent $AlCl_3$. The catalytic properties of ${\gamma}$ and ${\eta}-Al_2O_3$ prepared at various temperatures were investigated and the reaction kinetics of ${\alpha}-Al_2O_3$ formation from $Al(OH)_3$ was considered.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.401-410
• /
• 2016

The $Pt-Sn/Al_2O_3$ catalysts mixed with metal oxides for propane dehydrogenation were studied. $Cu-Mn/{\gamma}-Al_2O_3$, $Ni-Mn/{\gamma}-Al_2O_3$, $Cu/{\alpha}-Al_2O_3$ was prepared and mixed with $Pt-Sn/Al_2O_3$ to measure the activity for propane dehydrogenation. As standard sample, $Pt-Sn/Al_2O_3$ catalyst mixed with glassbead was adopted. In the case of catalytic activity test after non-reductive pretreatment of catalyst and metal oxide, $Pt-Sn/Al_2O_3$ mixed with $Cu-Mn/{\gamma}-Al_2O_3$ showed higher conversion of 15% and similar selectivity at $576.5^{\circ}C$, compared to conversion of 8% in standard sample. In the case of catalytic activity test after reductive pretreatment of catalyst and metal oxde, $Cu/{\alpha}-Al_2O_3$ showed higer yield than standard sample. But, increase of yield of most of samples after reductive pretreatment was not significant, so it was found that lattice oxygen of $Cu-Mn/{\gamma}-Al_2O_3$ is effective to propane dehydrogenation.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.335-338
• /
• 2006

전자수송층과 음극 사이에 $Al_2O_3$를 넣은 이중구조 음극을 갖는 유기발광다이오드를 제작하였다. 제작한 디바이스의 구조는 $ITO/NPB(40\;nm)/Alq_3(60\;nm)/Al_2O_3(0-1.5\;nm)/Al(120\;nm)$로 $Al_2O_3$의 두께를 변화시켰다. $Al_2O_3$의 두께가 0.3 nm일 때는 터널링에 의해서 전자주입이 증가하여 전류와 휘도가 모두 좋아졌다. 반면에 $Al_2O_3$의 두께가 0.5 nm일 때는 전류는 감소하지만 정공과 전자의 비율이 더 좋아져서 전류효율이 크게 향상되었다. 또한 $Al_2O_3$는 엑시톤이 음극과의 계면에서 발광하지 않고 소멸하는 것을 막아주어서 휘도를 증가시켰다.

• Korean Journal of Materials Research
• /
• v.16 no.12
• /
• pp.771-776
• /
• 2006

In this study, we report a method to synthesize the aluminum nitride (AlN) powders from aluminum oxyhydroxide (AlOOH). AlOOH powders were prepared from the aluminum hydroxide ($Al(OH)_3$) by heattreatment at the reaction temperature of $350^{\circ}C$. Simple heat treatment of AlOOH in the flow of $NH_3$ gas leads to the formation of hexagonal AlN powders through intermediate conversion of ${\delta}-,\;{\gamma}-$ and ${\alpha}-Al_2O_3$. The FTIR transmission spectra show a broad peak related to Al-N bonds centered around 690 $cm^{-1}$ confirming the presence of AlN. The major peaks in Raman spectra were observed in 250 $cm^{-1}$ and 659 $cm^{-1}$. From the results, synthesized powders from the AlOOH powders were confirmed AlN powders.

• Korean Journal of Food Science and Technology
• /
• v.28 no.5
• /
• pp.801-805
• /
• 1996

This study was performed to investigate the effect of serum enzyme activities in rats after administration of aluminum compound. Seventy five male Sprague-Dawley rats were divided into five groups consisting of control, $250\;ppm\;AlCl_3,\;500\;ppm\;AlCl_3,\;250\;ppm\;Al_2(SO_4)_3$ and $500ppm Al_2(SO_4)_3$ groups and kept on the diet for 2 weeks. The weight gain increased from 0.53 to 3.35% in $AlCl_3$ adiministration groups but decreased from 2.82 to 6.16% in $Al_2(SO_4)_3$, administration groups as compared to control group. As compared to control group, activities of lactate dehydrogenase (LDH) and aspartate amino transaminase (AST) in serum increased 29.43 to 57.68% and 0.68 to 9.97% in $AlCl_3$ adiministration groups, and 74.60 to 29.33% and 21.04 to 24.79% in $Al_2(SO_4)_3$ adiministration groups, respectively. However, alanine amino transminase (ALT) decreased from 12.69 to 25.42% in $AlCl_3$ adiministration groups and from 24.32 to 39.62% in $Al_2(SO_4)_3$ administration groups. Cholinesterase activity increased from 28.98 to 12.73% as compared to control group by administration of $AlCl_3$ and decreased from 3.93 to 14.48% by administration of $Al_2(SO_4)_3$.

• Journal of the Korean Chemical Society
• /
• v.37 no.9
• /
• pp.787-792
• /
• 1993

Semiempirical MNDO calculations are employed to study relation properties on bridging OH group with Al-O(P-O) bond length and Al-O-P bond angle of structural characteristics using birdging $(OH)_3AlOP(OH)_3$ and $(OH)_3AlOHP(OH)_3^+$ model culster. We know that the O-H bond dissociation energy of bridging OH group is increased with increasing Al-O(P-O) bond length and decreasing Al-O-P bond angle. The bridging OH group is formed into enlarged Al-O(P-O) bond length and shortened Al-O-P bond angle in bridging oxygen atom by a hydrogen migration. The negative net charge of bridging oxygen atom is increased with longer Al-O-P bond angle, while the positive net charge is decreased with longer Al-O-P bond angle.

• Journal of the Korean Ceramic Society
• /
• v.34 no.6
• /
• pp.553-560
• /
• 1997

A fine $\alpha$-Al2O3 powder was prepared by sol-gel process for membrane application. And it was carried out by adding 1.5wt% $\alpha$-Al2O3 powders(mean size : 87 nm) as seeds to the prepared sols and by controlling the heating schedule (the heating rate and the soaking time) to prevent the microstructural change, which occured during $\theta$-to $\alpha$Al2O3 phase transformation. The seeded $\alpha$-Al2O3 particles acted as the heterogeneous nucleation sites for the $\alpha$-Al2O3 nucleation during the transformation of $\theta$- to $\alpha$-Al2O3 and resulted in increasing the driving force of phase transformation to activate the formation of $\alpha$-Al2O3 phase at 82$0^{\circ}C$. By $\alpha$-Al2O3 seeding and controlling of heating condition the phase transformation of $\theta$- to $\alpha$-Al2O3 was accomplished at low temperature and the grain growth process was depressed. Therefore, the unsupported membrane could be fabricated in $\alpha$-Al2O3 . The average diameter of pores in the fabricated membrane was 7 nm and the porosity was 47%.