• 한국광물학회지
• /
• 제11권2호
• /
• pp.85-96
• /
• 1998

The sericite ore is formed by the hydrothermal alteration of rhyodacitic welded tuff. The alteration zone of the host rock can be classified into four types based on the mineral assemblages ; sericite, quartz-sericite, silicified and propylite zone. The sericite ore mainly occurs as vein types and fault clay along the fault plane in the quartz-sericite zone. Mineral components of the sericite ore are mainly sericite with minor diaspore, corundum and pyrite. The sericitic porcelaineous ore is mainly composed of quartz and sericite. Accessory minerals are muscovite, diaspore, sphene, corundum, pyrite, iron-oxides and etc. The chemical compositions of K2O, Al2O3, and ignition loss in the sericite ore increase largely than that of the host rock, while the compositions of SiO2, Na2O and Fe2O3 decrease. XRD patterns of the heat-treated sericite ores show the formation of mullite at $1,200^{\circ}C$. and the diaspore-bearing sericite ore forms mullite and corundum at $1,200^{\circ}C$. The differential thermal analysis of the sericite ores show small endothermic peak at 645~668$^{\circ}C$. and the diaspore-bearing sericite ore shows a strong endothermic peak at $517^{\circ}C$. It indicates that the decomposition of diaspore appear at lower temperature than that of sericite. The thermal expansivity of the sericite ores show the similar pattern. The sericite ores show the thermal expansivity of 3.3~4.7% at 900$^{\circ}C$ and 0.39~0.75% at 1,20$0^{\circ}C$, respectively. DTA-TG curves of the sericite ores show closely relations with the thermal expansivity.

• Composites Research
• /
• 제28권4호
• /
• pp.226-231
• /
• 2015

CNT(carbon nanotubes) 강화 알루미늄 나노복합재는 우수한 기계적 특성으로 자동차용 차세대 경량재료로 주목을 받고 있으나 소재 제조 과정에 있어 CNT의 균일 분산 확보가 어렵고 대량제조 공정 확립이 어려워 자동차 부품으로의 적용이 어렵다. 그러나 점차 CNT 생산이 대량화 되고 있고 복합재로서의 특성이 개선되고 있다. 따라서 본 연구는 CNT강화 알루미늄 나노복합재의 현 수준을 확인하고 자동차 부품 관점에서의 적용가능성을 검토하고자 하였다. 평가에 사용된 소재는 20L급 High energy milling기에서 알루미늄 분말과 CNT를 혼합한 후, 소결 및 압출하여 봉상(${\phi}80$)으로 제조되었다. 소재 관점에서 기계적 특성 및 열적 특성을 분석하였으며, 부품 적용성 관점에서는 현재 자동차 부품에 사용되는 소재와 그 소재가 사용되는 각 부품의 주요 요구 특성을 상대 비교하였다. 고강성과 성형성이 요구되는 부품에 사용되는 상용소재(A390) 및 SiC/Al 복합재와 성형성 비교평가를 진행하였으며, 탄성계수를 측정하였다. 피로 내구 및 경량화가 요구되는 메인베어링캡 양산소재와의 내구성 비교 평가를 실시하였다. 또한 고온 안정성이 요구되는 피스톤용 내열 소재와 열팽창계수 및 열화에 따른 강도저하를 비교 평가하였다. 구배가 큰 금형을 설계하여 단조 가공 후, 성형성(외관 crack 및 성형압 측정)을 비교하였으며, 내구성 평가를 위해 실제 부품인 H사(社) 소형 엔진블록의 메인베어링 캡을 적용하여 일축 단품 피로 시험을 진행하였다. 이를 통해 우수한 소재 특성을 확인하였고, 자동차 구조용 부품으로 적용이 가능함을 확인하였다.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.470-475
• /
• 2013

In this study, we report that effects of a filler with a high coefficient of thermal expansion on a sealant for high-temperature ($750{\sim}850^{\circ}C$) SOFC. We designed a $SiO_2-BaO-ZnO-B_2O_3-Al_2O_3$ glass system with a softening temperature higher than $750^{\circ}C$. The properties of the glass system show not only low volumetric shrinking but also low swelling. The glass system did not create a crystal phase during along-term heat treatment. We fabricated a seal gasket with 0, 10, 15, and 20 wt% cristobalite added as filler materials with glass powder. The coefficient of thermal expansion of the seal gasket increased according to cristobalite content. During along-term heat treatment, the leak rate decreased by about 5% after a heat treatment in an oxidizing atmosphere at $750^{\circ}C$ for 2000 h, also decreasing by about 6% after a heat treatment in a reducing atmosphere at $750^{\circ}C$ for 1000 h.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.604-609
• /
• 2016

This study reports on wet-foam stability with respect to porous ceramics from a particle-stabilized colloidal suspension that is achieved through the addition of polymethyl methacrylate (PMMA) using a wet process. To stabilize the wet foam, an initial colloidal suspension of $Al_2O_3$ was partially hydrophobized by the surfactant propyl gallate (2 wt.%) and $SiO_2$ was added as a stabilizer. The influence of the PMMA content on the bubble size, pore size, and pore distribution in terms of the contact angle, surface tension, adsorption free energy, and Laplace pressure are described in this paper. The results show a wet-foam stability of more than 83%, which corresponds to a particle free energy of $2.7{\times}10^{-12}J$ and a pressure difference of 61.1 mPa for colloidal particles with 20 wt.% of PMMA beads. It was possible to control the uniform distribution of the open/closed pores by increasing the PMMA content and by adding thick struts, leading to the achievement of a higher-stability wet foam for use in porous ceramics.

• 한국군사과학기술학회지
• /
• 제7권2호
• /
• pp.81-87
• /
• 2004

Semiconductor thick film gas sensors based on tin oxide are fabricated and their gas response characteristics are examined for four simulant gases of chemical warfare agent (CWA)s. The sensing materials are prepared in three different sets. 1) The Pt or Pd $(1,\;2,\;3\;wt.\%)$ as catalyst is impregnated in the base material of $SnO_2$ by impregnation method.2) $Al_2O_3\;(0,\;4,\;12,\;20\;wt.\%),\;In_2O_3\;(1,\;2,\;3\;wt.\%),\;WO_3\;(1,\;2,\;3\;wt.\%),\;TiO_2\;(3,\;5,\;10\;wt.\%)$ or $SiO_2\;(3,\;5,\;10\;wt.\%)$ is added to $SnO_2$ by physical ball milling process. 3) ZnO $(1,\;2,\;3,\;4,\;5\;wt.\%)$ or $ZrO_2\;(1,\;3,\;5\;wt.\%)$ is added to $SnO_2$ by co-precipitation method. Surface morphology, particle size, and specific surface area of fabricated sensing films are performed by the SEM, XRD and BET respectively. Response characteristics are examined for simulant gases with temperature in the range 200 to $400^{\circ}C$, with different gas concentrations. These sensors have high sensitivities more than $50\%$ at 500ppb concentration for test gases and also have shown good repetition tests. Four sensing materials are selected with good sensitivity and stability and are fabricated as a sensor array A sensor array Identities among the four simulant gases through the principal component analysis (PCA). High sensitivity is acquired by using the semiconductor thick film gas sensors and four CWA gases are classified by using a sensor array through PCA.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.1121-1126
• /
• 2010

Borosilicate glass (81% $SiO_2$-2% $Al_2O_3$-13% $B_2O_3$-4% $Na_2O_3$) was prepared, and the glass was ion exchanged in $KNO_3$ powder containing different temperature and time. The $K^+-Na^+$ ion exchange takes place at the glass surface and creates compressed stress, which raise the mechanical strength of the glass. The depth profile of $Na^+$ and $K^+$ was observed by electron probe micro analyzer. With the increasing heat-treatment time from 0min to 20min, the depth profile was increased from 17.1um to 29.4um, but mechanical properties were decreased. It was also found out that excessive heat treatment brings stress relaxation. The Vickers hardness, Fracture Toughness and bending strength of ion exchanged samples at $570^{\circ}C$ for 10min were $821.8H_v$, $1.3404MPa{\cdot}m^{1/2}$, and 953MPa, which is about 120%, 180%, and 450% higher than parent borosilicate glass, respectively. Transmittance was analyzed by UV-VIS-NIR spectrophotometer. Transmittance of ion exchanged borosilicate glass was decreased slightly at visible-range. It can be expected that transparent bulletproof materials in more light-weight and thinner by ion exchanged borosilicate glass.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.373-378
• /
• 2002

Metal matrix composites have a great interest in recent years because high specific strength, high specific stiffness characteristics, and application ranges of the composites are extend to variety industry. In this paper, an investigation was performed on the plane strain fracture toughness and slinding wear properties of AC4CH alloy(Al-Si-Mg line) reinforced with 20wt% aluminum borate whisker expect one, which contained a inorganic binder($TiO_2$). the binder led to the formation of strengthen the whisker each other. The test of fracture toughness was using CT(half size) specimen of thickness 12.5mm, width 25mm. and test of slinding wear of using tribo a pin-on-disk machine and lubricant is used without paraffine 8.2CST at room temperature. As results, Fracture toughness $K_{IC}$ is $8.7MPa-m^{05}$ for ABOw/AC4CH, $9.28MPa-m^{05}$ for ABOw/AC4CH added $TiO_2$. but AC4CH alloy was violated the critical stipulated by ASTM standard for valid measurement of $K_{IC}$. In case of, it was performed $J_{IC}$ test instead of $K_{IC}$ based on ASTM E 1820.

• Bulletin of the Korean Chemical Society
• /
• 제16권6호
• /
• pp.539-542
• /
• 1995

The crystal structure of K92-X (K92Al92Si100O384), a=25.128(1) Å, dehydrated at 360 ℃ and 2X 10-6 Torr, has been determined by single-crystal X-ray diffraction techniques in the cubic space group Fd&bar{3} at 21(1) ℃. The structure was refined to the final error indices R1=0.044 and Rw=0.039 with 242 reflections for which I<3σ(I). In this structure, ninety-two K+ ions are located at the five different crystallographic sites. Sixteen K+ ions are located at the centers of the double six rings (site I; K(1)-O(3)=2.65(2) Å and O(3)-K(1)-O(3)=92.0(6)°). About twelve K+ ions lie at site I' in the sodalite cavity opposite double six rings (D6R's) and these K+ ions are recessed ca. 1.62 Å into the sodalite cavity from their O(3) plane (K(2)-O(3)=2.74(2) Å, O(3)-K(2)-O(3)=88.5(8)°). About thirty-two K+ ions are located at the site II in the supercage and these K+ ions are recessed ca. 1.20 Å into the supercage from their O(2) plane (K(3)-O(2)=2.64(2) Å, and O(2)-K(3)-O(2)=101(1)°). About twenty-two K+ ions lie at the site III in the supercage opposite 4-ring ladder and the remaining ten K+ ions lie at the site III' near the 4-ring ladder in the supercage (K(4)-O(4)=2.88(3) Å, O(4)-K(4)-O(4)=79.8(9)°, K(5)-O(4)=2.8(2) Å, and O(4)-K(5)-O(4)=68(5)°).

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.414-420
• /
• 2001

A 30-kV plasma immersion ion implantation setup (P $I^3$) has been equipped with a self-developed 6'-magnetron to perform hard coatings with enhanced adhesion by P $I^3$D(P $I^3$ assisted deposition) process. Using ICP source with immersed Ti antenna and reactive magnetron sputtering of Ti target in $N_2$/Ar ambient gas mixture, the TiN films were prepared on Si substrates at different pulse bias and ion-to-atom arrival ratio ( $J_{i}$ $J_{Me}$ ). Prior to TiN film formation the nitrogen implantation was performed followed by deposition of Ti buffer layer under A $r^{+}$ irradiation. Films grown at $J_{i}$ $J_{Me}$ =0.003 and $V_{pulse}$=-20kV showed columnar grain morphology and (200) preferred orientation while those prepared at $J_{i}$ $J_{Me}$ =0.08 and $V_{pulse}$=-5 kV had dense and eqiaxed structure with (111) and (220) main peaks. X-ray diffraction patterns revealed some amount of $Ti_{x}$ $N_{y}$ in the films. The maximum microhardness of $H_{v}$ =35 GN/ $M^2$ was at the pulse bias of -5 kV. The P $I^3$D technique was applied to enhance wear properties of commercial tools of HSS (SKH51) and WC-Co alloy (P30). The specimens were 25-kV PII nitrogen implanted to the dose 4.10$^{17}$ c $m^{-2}$ and then coated with 4-$\mu\textrm{m}$ TiN film on $Ti_{x}$ $N_{y}$ buffer layer. Wear resistance was compared by measuring weight loss under sliding test (6-mm $Al_2$ $O_3$ counter ball, 500-gf applied load). After 30000 cycles at 500 rpm the untreated P30 specimen lost 3.10$^{-4}$ g, and HSS specimens lost 9.10$^{-4}$ g after 40000 cycles while quite zero losses were demonstrated by TiN coated specimens.s.

• 한국토양비료학회지
• /
• 제42권5호
• /
• pp.399-407
• /
• 2009

레이저 유도붕괴 분광법(LIBS)은 물질상태(고체, 액체, 기체)에 상관없이 신체 접촉시 오염 우려 및 미량 시료도 전처리 없이 동시에 많은 종류의 원소 분석으로 분석과정이 단순하고 신속하게 분석이 가능하며, 소형화된 레이저의 개발로 시료의 직접적인 채취가 어려운 조건의 현장분석에도 적합하다. 농산물 안정성 평가나 친환경 농업 및 정밀농업을 위한 조사 등에 활용될 수 있는 비파괴 실시간 정량분석기술로서 LIBS 분석법의 토양분석 가능성을 평가하고자 표준광물, 미국의 표준기술연구소의 표준토양, 미국 테네시주 초지 및 밭토양을 대상으로 토양 구성성분의 정성 정량적 분석에 필요한 측정조건을 조사하고 이를 토대로 LIBS에 의한 농도값과 기존의 화학분석법을 통해 측정한 결과를 비교하였다. LIBS 측정은 펄스형 Nd:YAG 레이저(Minilite II, Continuum, Santa Clara, CA)에서 나오는 1064 nm 에너지 파장의 광원을 시편의 플라즈마를 생성시키는데 사용하였고, 25 mJ/pulse 여기 에너지 빔을 펄스폭 35 ns, 펄스 반복 주기 10 Hz, 노출시간 10 s 동안 시료의 표면에 조사하였다. LIBS 분광은 0.03 nm의 해상력으로 200 nm에서 600 nm의 영역에서 50 m 이하로 분쇄하여 원형 펠렛 형태로 압축시킨 시료를 10 rpm의 속도로 회전시키면서 상온 상압의 실험실 조건에서 수행되었다. LIBS를 이용한 토양 중 주요한 원소의 적정 파장(nm)은 Al(I) 309.2 nm, Ca(I) 422.6 nm, Fe(I) 406.4 nm, Mg(I) 285.2 nm, Na(I) 589.2 nm, Si(I) 288.2 nm, Ti(I) 398.9 nm 이었다. LIBS의 피크강도가 물질 중 원소의 농도가 증가됨에 따라 각 원소의 특정 파장대에서 일정하게 증가되는 것으로 나타나고 있으나 표준물질의 LIBS의 신호비와 원소비를 통해 측정된 검량곡선의 상관계수($r^2$)는 0.863에서 0.977의 범위로 원소별로 상이할 뿐만 아니라 0.98에 미치지 못하였다. 또한, 토양 중 분석대상원소에 대하여 기존 ICP-AES에 의한 표준방법으로 분석된 시료의 측정값과 비교하여 상대적인 오차는 대략적으로 (-)40%에서 80%이상이며, 평균오차는 32.2%로 표준척도 20% 이상을 초과하였다. LIBS에 의한 토양분석은 토양의 조성과 입자의 크기에 따른 매질효과(matrix effect)로 표준물질의 검량곡선에서 결정계수가 낮고, 원소별 함량도 기준의 표준방법과 비교할 때 오차가 컸다. 따라서 LIBS에 의한 토양분석은 정성적인 분석 수준의 정밀도를 보였으며, 토양 매질의 영향을 최소화하기 위하여 기존의 분쇄 펠렛형 시료조제 및 회전측정 이외의 다양한 토양매질의 표준물질(standard reference material)의 확보, 새로운 전처리 방법 및 측정상 방법개선 등 신뢰성 있는 정량 분석을 위한 노력이 필요할 것으로 사료된다.