• 대한조선학회논문집
• /
• 제38권1호
• /
• pp.99-107
• /
• 2001

어선 제작시 어선의 고속화 및 어로작업 등에 의한 내구성을 향상시키기 위해 선각재질이 가볍고, 강도, 화재 및 해수의 부식 등에 뛰어난 재료의 사용이 요구되어지고 있다. 이러한 어선으로서는 크게 FRP어선과 Al어선으로 대별할 수 있다. 그러나 FRP어선은 가볍고 강도는 우수하나 인화성이 높아서 열에 매우 약하고 선박 제작 과정에 있어 인체에 해로운 유해성분이 발생할 뿐만 아니라, 폐선의 경우 산업폐기물로써 환경 오염에 큰 영향을 미치고 있다. 그런 반면에, Al어선은 FRP어선의 단점을 보완할 수 있는 재료로써, 고강도 및 경량화의 효과를 낼 수 있고, FRP어선보다 인화성이 낮아서 열에 강하고, 내구성이 높아 해수의 부식방지에 뛰어나므로 Al 어선의 개발이 시급한 실정이다. 그러나, 알루미늄 합금은 용접성이 좋지 않고 용접변형 및 균열이 발생하고, 건조 비용이 비싸다는 단점이 있다. 따라서, 본 연구에서는 Al 합금 접합시의 문제점 해결방안으로 용접이음부의 새로운 형상을 개발하고 개발한 신형상에 대한 역학적 거동을 규명하고자 하였다. 이를 위해, 먼저 평판 이론을 이용하여 구조부재를 단순화하여 평판, 보강판, 신형상에 대하여 해석함으로써 강도를 비교 검토하고, 이러한 결과를 토대로 자체 개발된 용접열전도 및 용접열응력 수치해석 프로그램을 사용하여 평판과 신형상의 온도분포, 용접잔류응력, 인장, 압축시의 강도를 수치시뮬레이션을 통하여 비교, 검토하였다. 또한, 인장 시험편을 제작하여 실험을 통하여 강도를 비교함으로써 신형상에 대한 적용 가능성 및 역학적 우수성을 입증하고자 하였다.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.677-684
• /
• 2003

A new unipolar aerosol charger was developed by using an indirect photoelectric charging. The charger consists of two coaxial tubes, the inner UV lamp wrapped with stainless mesh and the outer Al cylinder. In this study, the effects of flow rate, particle size, and electric field were examined to search the optimal charging conditions with experimental and numerical methods. Monodisperse NaCl particles were fed into an annular space and the particles were charged by negative ions generated from Al plate exposed to the UV light. According to experimental results, the average number of elementary charge on particles increases from 2.5 to 5.5 as particle size increases from 50nm to 130nm at 2.5 L/min and 100V. The average number of elementary charge on particles was maximized at 25V as the electric potential between the stainless mesh and Al plate was varied from 0V to 400V.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.155-157
• /
• 2007

The Friction spot dissimilar welding of galvanized steel/Al6061-T6 was performed to investigate the mechanical characteristics of the joints. The presence of thin film of aluminum oxide on the surface and melting of zinc in the coating, made substandard joint characteristics for dissimilar Friction spot joining(FSJ) performed with out removing the coating. Where as, for dissimilar FSJ of galvanized steel/Al6061-T6 after removing the coating, superior agitation and welding quality has been obtained for a configuration of galvanized steel as the upper plate and Al6061-T6 as lower plate. The results from tensile tests and microscopic examination for various combinations of the welding parameters have been presented.

• Steel and Composite Structures
• /
• 제45권5호
• /
• pp.767-774
• /
• 2022

A geometrically nonlinear stability analysis of sandwich annular plates with cellular core and particle-reinforced composite layers has been performed in the present research. The particles are powders of graphene oxide (GOP) which act as nanoscale filler of epoxy matrix. To this regard, Halpin-Tsai micromechanical scheme has been used to define the material properties of the layers. A square shaped core has been considered for which the material properties have been defined based on the relative density concept. Large deflection theory of thin shells has been selected to develop the complete formulation of sandwich plate. The geometrically nonlinear stability analysis of sandwich annular plates has been carried out by indicating that the buckling load is dependent on particle amount, thickness of layer and core relative density.

• 대한약리학회지
• /
• 제18권2호
• /
• pp.45-50
• /
• 1982

Yeum et al. formulated a new hot-plate method using the threshold temperature, and there are some controversies on the effects of naloxone and diazepam on the antinociceptive action. In this paper, the comparison of three methods registering analgesic activity and the application of the new hot-plate method formulated by Yeum et al. on the study of the influences of naloxone and diazepam on the analgesic effect of morphine were tried in male mice. The results obtained were summarized as follows; 1) The least-square regression lines of the morphine analgesia plotted against log-dose showed the correlation coefficient of above 0.90, but the competitive antagonism produced by naloxone (0.1 mg/kg) against the analgesia was more prominently demonstated by the new hot-plate method than the other methods: original hot-plate method and electrical stimulation method. 2) In the experiment using the new hot-plate method, the log dose-response curve of morphine (y=7.30 x+49.80, r=0.998) was shifted to the right by the pretreatment of naloxone (0.1 mg/kg), but was slightly shifted to the left by the pretreatment of diazepam (2.5 mg/kg). This study suggests that for the analgesia experiment, the new hot-plate method is superior to the original hot-plate method or the electrical stimulation method, and that the potentiative effect of diazepam on the morphine anagesia is not significant.

• Structural Engineering and Mechanics
• /
• 제59권2호
• /
• pp.227-241
• /
• 2016

A circular plate with constant thickness, finite radius and stiff edge lying on an elastic halfspace is considered. The half-space consists of a soft functionally graded (FGM) layer with arbitrary varying elastic properties and a homogeneous elastic substrate. The plate bends under the action of arbitrary axisymmetric distributed load and response from the elastic half-space. A semi-analytical solution for the problem effective in whole range of geometric (relative layer thickness) and mechanical (elastic properties of coating and substrate, stiffness of the plate) properties is constructed using the bilateral asymptotic method (Aizikovich et al. 2009). Approximated analytical expressions for the contact stresses and deflections of the plate are provided. Numerical results showing the qualitative dependence of the solution from the initial parameters of the problem are obtained with high precision.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2831-2834
• /
• 2014

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2007년도 제33회 하계학술대회 초록집
• /
• pp.314-314
• /
• 2007

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.337-339
• /
• 2005

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1994년도 추계학술대회강연 및 발표대회 강연및 발표논문 초록집
• /
• pp.32-32
• /
• 1994