• Korean Journal of Environmental Biology
• /
• v.26 no.1
• /
• pp.30-35
• /
• 2008

In order to investigate whether or not CCD-986sk cell line can be affected by Korean Ecklonia stolonifera Okamura, we examined the MTT assay when we treated Korean Ecklonia stolonifera Okamura extract in CCD-986sk human fibroblast cell line. The sample were tested for cell proliferation activity by means of a modification of the MTT assay. Ecklonia stolonifera Okamura extract showed significantly strong cell proliferation activity at the range of from 6.25 mg $mL^{-1}$ to 1.56 mg $mL^{-1}$ compared with control group. And in order to search for inhibition agents of skin melanin formation, we tested for inhibition effect of melanin pigmentation of Korean Ecklonia stolonifera Okamura using Clone M-3 mouse melanocyte cell lines. when we treated the extracts of Ecklonia stolonifera Okamura to the mouse melanocyte cell lines, the sample showed a significantly little formation of melanin pigments compared with control group at the only range of 200 mg $mL^{-1}$. These results suggest that extract of Korean Ecklonia stolonifera Okamura may represents an excellent candidate for inhibition of melanin pigmentation and for protection of human skin aging at in vitro level.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.298-298
• /
• 2014

Quantum dot infrared photodetectors (QDIPs) based on Stranski-Krastanov (SK) quantum dots (QDs) have been widely explored for improved device performance using various designs of heterostructures. However, one of the biggest limitations of this approach is the "pancake" shape of the dot, with a base of 20-30 nm and a height of 4-6 nm. This limits the 3D confinement in the quantum dot and reduces the ratio of normal incidence absorption to the off-axis absorption. One of the alternative growth modes to the formation of SK QDs is a sub-monolayer (SML) deposition technique, which can achieve a much higher density, smaller size, better uniformity, and has no wetting layer as compared to the SK growth mode. Due to the advantages of SML-QDs, the SML-QDIP design has attractive features such as increased normal incidence absorption, strong in-plane quantum confinement, and narrow spectral wavelength detection as compared with SK-DWELL. In this study, we report on the improved device performance of InAs/InGaAs SML-QDIP with different composition of $Al_xGa1-_xAs$ barrier. Two SML-QDIPs (x=0.07 for sample A and x=0.20 for sample B) are grown with the 4 stacks 0.3 ML InAs. It is investigated that sample A with a confinement-enhanced (CE) $Al_{0.22}Ga_{0.78}As$ barrier had a single peak at $7.8{\mu}m$ at 77 K. However, sample B with an $Al_{0.20}Ga_{0.80}As$ barrier had three peaks at (${\sim}3.5{\mu}m$, ${\sim}5{\mu}m$, ${\sim}7{\mu}m$) due to various quantum confined transitions. The measured peak responsivities (see Fig) are ~0.45 A/W (sample A, at $7.8{\mu}m$, $V_b=-0.4V$ bias) and ~1.3 A/W (sample B, at $7{\mu}m$, $V_b=-1.5V$ bias). At 77 K, sample A and B had a detectivity of $1.2{\times}10^{11}cm.Hz^{1/2}/W$ ($V_b=-0.4V$ bias) and $5.4{\times}10^{11}cm.Hz^{1/2}/W$ ($V_b=-1.5V$ bias), respectively. It is obvious that the higher $D^*$ of sample B (than sample A) is mainly due to the low dark current and high responsivity.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.4
• /
• pp.1-7
• /
• 2007

Slug/bail tests were conducted in sand layer (sbt-1 well), silty sand layer (sbt-2 well), and mixed sand and silty sand layer (sbt-3 well). Hydraulic conductivity and specific storage coefficient were estimated through slug/bail tests. Pore volumes of groundwater level drawdown zone for bail test were estimated by using hydraulic conductivity and specific storage coefficient. KGS model was most suitable interpretation method of slug/bail tests. Average hydraulic conductivity for slug/bail tests were estimated to be $6.65{\times}10^{-5}$ m/sec in sbt-1 well, $6.33{\times}10^{-6}$ m/sec in sbt-2 well, and $3.72{\times}10^{-5}$ m/sec in sbt-3 well. Average specific storage coefficient for slug/bail tests were estimated to be 0.0225 in sbt-1 well, 0.0177 in sbt-2 well, and 0.0259 in sbt-3 well. Dimensionless time and dimensionless wellbore storage were estimated by use of transmissivity, storativity, test time, and specification of test wells. And, dimensionless drawdown were selected by parameter ${\alpha}\;and\;{\beta}$ parameter from Cooper et al. (1967). Radius of influence were estimated by estimated dimensionless time, dimensionless wellbore storage, and dimensionless drawdown. The average radius of influnce for slug/bail tests were estimated to be 1.377 m in sbt-1 well, 1.253 m in sbt-2 well, and 1.558 m in sbt-3 well. Pore volume at groundwater level drawdown zone by dummy withdrawal for bail tests were estimated to be $145,636cm^3$ in sbt-1 well, $71,561cm^3$ in sbt-2 well, and $100,418cm^3$ in sbt-3 well. Pore volume excepted well volume at groundwater level drawdown zone by dummy withdrawal for bail tests were estimated to be $145,410cm^3$ in sbt-1 well, $71,353cm^3$ in sbt-2 well, and $100,192cm^3$ in sbt-3 well.

• Korean Journal of Poultry Science
• /
• v.50 no.4
• /
• pp.303-310
• /
• 2023

The current study was conducted to compare the effect of crossbred on the body weight and laying performance of Korean native chicken from hatch to week 40. A total of 873 one-day-old chicks were divided into twelve crossbreds (i.e., CFCK, CFYC, CFYD, CKCF, CKYC, CKYD, YCYD, YCCF, YCCK, YDCF, YDCK, and YDYC) and commercial layer (Hy-Line Brown) were obtained as a counterpart in the study. All the birds are raised in battery cages (76 × 61 × 46 cm³) and then raised until 14 weeks and subsequently moved to layer battery cages (60 × 25 × 45 cm³) and raised until 16 weeks. The body weight and viability were measured biweekly from hatching to week 16. The week of 16, body weight range was about 1,010.24 to 1,411.77 g. The body weight of specific crossbreeds (i.e., CKCF, YCYD, and YDYC) was found to be comparable to that of Hy-Line Brown). The viability hatch to week 14 range was about 55 to 100% and however week 14 to 16 range was 80 to 100%. The crossbred (i.e., CKCF) recorded superior (P<0.05) viability throughout the whole experiment period, even compared with Hy-Line Brown (100% vs 96%). Our results are indicating that crossbreds Korean native chicken including CKCF, and YDYC has the potential to enhance key features of laying hens during the growing phase like optimal body weight and higher viability.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.87-87
• /
• 2010

Photoelectrochemical (PEC) systems are promising methods of producing H2 gas using solar energy in an aqueous solution. The photoelectrochemical properties of numerous metal oxides have been studied. Among them, the PEC systems based on TiO2 have been extensively studied. However, the drawback of a PEC system with TiO2 is that only ultraviolet (UV) light can be absorbed because of its large band gap (3.2 - 3.4 eV). Two approaches have been introduced in order to use PEC cells in the visible light region. The first method includes doping impurities, such as nitrogen, into TiO2, and this technique has been extensively studied in an attempt to narrow the band gap. In comparison, research on the second method, which includes visible light water splitting in molecular photosystems, has been slow. Mallouk et al. recently developed electrochemical water-splitting cells using the Ru(II) complex as the visible light photosensitizer. the dye-sensitized PEC cell consisted of a dye-sensitized TiO2 layer, a Pt counter electrode, and an aqueous solution between them. Under a visible light (< 3 eV) illumination, only the dye molecule absorbed the light and became excited because TiO2 had the wide band gap. The light absorption of the dye was followed by the transfer of an electron from the excited state (S*) of the dye to the conduction band (CB) of TiO2 and its subsequent transfer to the transparent conducting oxide (TCO). The electrons moved through the wire to the Pt, where the water reduction (or H2 evolution) occurred. The oxidized dye molecules caused the water oxidation because their HOMO level was below the H2O/O2 level. Organic dyes have been developed as metal-free alternatives to the Ru(II) complexes because of their tunable optical and electronic properties and low-cost manufacturing. Recently, organic dye molecules containing multi-branched, multi-anchoring groups have received a great deal of interest. In this work, tri-branched tri-anchoring organic dyes (Dye 2) were designed and applied to visible light water-splitting cells based on dye-sensitized TiO2 electrodes. Dye 2 had a molecular structure containing one donor (D) and three acceptor (A) groups, and each ended with an anchoring functionality. In comparison, mono-anchoring dyes (Dye 1) were also synthesized. The PEC response of the Dye 2-sensitized TiO2 film was much better than the Dye 1-sensitized or unsensitized TiO2 films.

• Korean Journal of Poultry Science
• /
• v.45 no.1
• /
• pp.17-28
• /
• 2018

Infectious bronchitis virus (IBV) is an economically important disease in the poultry industry worldwide. This disease commonly manifests respiratory signs, poor egg quality, and decline in egg production. Since IBV is a RNA virus, the emergence of new variant strains is continuously reported and the immunization of susceptible chickens with only one antigenic type of the virus has been shown to induce partial or no protection against other unrelated types. Therefore, it is difficult to diagnose IBV due to variants serotypes. In this study, we collected serum from various ages of Broiler GP (Grandparent) to Layer CC (Commercial chick) and performed detectability comparison test between domestic company and multinational company manufacturing ELISA kit. Results of this experiment suggest that domestic company manufacturing ELISA kit is more sensitive to infectious bronchitis antibody than that of the multinational company. Our findings also suggest that antibody's change trends after infectious bronchitis vaccination. Thus, the use of appropriate kit for domestic situations is important.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.259-264
• /
• 2002

In this study, sintering properties of Artificial Lightweight aggregates(ALAs) prepared from coal ash as a function of sintering temperature (900$^{\circ}$C, 1000$^{\circ}$C, 1100$^{\circ}$C) and time (2min, 5min, 10min) when limestone added as lightweight mineral was investigated. Increasing the sintering temperature resulted simultaneously from a decline of quartz mineral as well as growth of mullite mineral. Addition of limestone to ALAs newly formed sintered minerals such as clinoptilolite and plagioclase. Sintering effect of ALAs prepared from coal ash and limestone was more affected by a sintering temperature than time. As sintering temperature and time increae, transition of macropore to micropore and formation of closed pores were happened, consequently shrank the total pore volume of ALAs. The surface of ALAs sintered at 1000$^{\circ}$C for 5min was nearly not detected open pores due toe amalgamation effect of molten slag layer but homogeneous distributions of closed pores with micro-scale were examined in cross sectional area ALAs. Sintering temperature and time which present the most adequate state, in the preparation of ALAs, are corresponded to 1000$^{\circ}$C and 5min, respectively.

• Journal of Periodontal and Implant Science
• /
• v.30 no.3
• /
• pp.491-504
• /
• 2000

In clinical therapy, the current goal of dental implants is to enhance quantity and quality of osseointegration. Surface roughness and oxide structure are considered to influence the behavior of adherent cells. The purpose of this study is to evaluate the effect of different surface treatment on cellular response. The attachment and proliferation of osteoblast-like cell on sandblasted, sandblasted and etched, thermal oxidated surfaces have been compared. Sandblasting was done with $Al_2O_3$ particles(grain size of $50{\mu}m$), etching was processed with $NH_4OH$ : $H_2O_2$ : $H_2O(1:1:5)$ at $90^{\circ}C$ for 1 minute. Thermal oxidation was followed sandblasting and etching at $400^{\circ}C$, $600^{\circ}C$, $800^{\circ}C$ for 2 hours. Measurement of surface roughness after the different treatment did not show any differences of Ra value between terated surfaces. Cell attachment and proliferation were increased during experiment period, but no difference was observed. SEM evaluation revealed a similar pattern of osteoblast-like cells, well attached with dendritic extension and producing numerous matrix vesicles on cell surface. The results of this study showed that oxide layer alteration by thermal oxidation did not affect the attachment and proliferation of osteoblast-like cells. This suggests the possibility that the cellular responses are further influenced by surface roughness than titaniun oxide structure.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.4 s.15
• /
• pp.43-54
• /
• 2004

The broadband receiver functions are developed from teleseismic P waveforms recorded at Wonju(KSRS), Inchon(IRIS), and Pohang(PHN), and are analyzed to examine the crustal structure beneath these stations. The teleseismic receiver functions are inverted in the time domain of the vertical P wave velocity structures beneath the stations. Clear P-to-S converted phases from the Moho interface are observed in teleseismic seismograms recorded at these stations. The crustal velocity structures beneath the stations are estimated by using the receiver function inversion method(Ammon et al., 1990). The general features of inversion results are as follows: (1) For the Inchon station, the Conrad discontinuity exists at 17.5 Km(SW) deep and the Moho discontinuity exists at 29.5 Km(NW) and 30.5 Km(SE, SW) deep. (2) The shallow crustal structure beneath Wonju station may be covered with a sedimentary rock of a 3 Km thickness. The average Moho depth is assumed about 33.0 Km, and the Conrad discontinuity may exist at 17.0 Km(NE) and 21.0 Km(NW) deep. (3) For Pohang station, the thickness of shallow sedimentary layer is a 3.0 Km in the direction of NE and NW. The Moho depth is 28.0 Km in the direction of the NE and NW. The Conrad discontinuity can be estimated to be existed at 21.0 Km deep for the NE and NW directions.

• Analytical Science and Technology
• /
• v.7 no.2
• /
• pp.233-236
• /
• 1994

To evaluate the emulsion stability indices of W/O emulsion system, we developed the simple and sensitive "VOLUMETRIC METHOD". This technique involved the first step of homogenizing the milk fat-water system with Ultra-turrax T25, then the volume of the added water phase was measured immediately. After quiescent incubation in test tubes at room temperature for a desired storage time, the bottom volume of the separated water layer was measured. And then "emulsion stability index(ESI)" was calculated by the following equation : $ESI=(1-V_s/V_a){\times}100$, where $V_a$ means the volume of the added water in the W/O emulsion and $V_s$ represents the volume of the separated water in the W/O emulsion for a desired storage time. The emulsion stability indices of W/O emulsion system at sorbitan trioleate, span 60, and tween 20 were $95.4{\pm}1.8$, $56.1{\pm}2.8$, and $41.6{\pm}2.2$ respectively. Furthermore, the differences between "VOLUMETRIC METHOD" and "Titus et al method" were less than 5.0 of ESI Value.