• 소성∙가공
• /
• 제12권5호
• /
• pp.449-456
• /
• 2003

Multi-step induction heating process was applied to the powder compact melting technique as a new heating process to achieve pinpoint accuracy, faster cycle time, repeatability, non-contact and energy-efficient heat in a minimal amount of time. The objective of this study is the establishment of the input data diagram of multi step induction heating process for automation of the fabrication process of 6061 Al foams with desired density. At first, proper induction coil was designed to obtain a uniform temperature distribution over the entire cross sectional area of specimen. By using this coil, foaming experiments were performed to investigate the multi-step induction heating conditions such as capacity, temperature and time conditions of each heating and holding step. On the basis of the obtained multi-step induction heating conditions, relationship between final heating temperature and fraction of porosity was investigated.

• Advances in aircraft and spacecraft science
• /
• 제6권4호
• /
• pp.273-282
• /
• 2019

This article is concerned with the investigation of geometrically non-linear vibration response of refined thick porous nanobeams. To this end, non-local theory of elasticity has been adopted to provide the nanobeam formulation. Voids or pores can affect the material characteristics of the nanobeam. So, their effects have been considered in this research and also there are various void distributions. The closed form solution of the non-linear problem has been used that is adopted from previous articles. Then, it is focused on the impacts of non-local field, void distribution, void amount and geometrical properties on non-linear vibrational characteristic of a nano-size beam.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.604-609
• /
• 2016

This study reports on wet-foam stability with respect to porous ceramics from a particle-stabilized colloidal suspension that is achieved through the addition of polymethyl methacrylate (PMMA) using a wet process. To stabilize the wet foam, an initial colloidal suspension of $Al_2O_3$ was partially hydrophobized by the surfactant propyl gallate (2 wt.%) and $SiO_2$ was added as a stabilizer. The influence of the PMMA content on the bubble size, pore size, and pore distribution in terms of the contact angle, surface tension, adsorption free energy, and Laplace pressure are described in this paper. The results show a wet-foam stability of more than 83%, which corresponds to a particle free energy of $2.7{\times}10^{-12}J$ and a pressure difference of 61.1 mPa for colloidal particles with 20 wt.% of PMMA beads. It was possible to control the uniform distribution of the open/closed pores by increasing the PMMA content and by adding thick struts, leading to the achievement of a higher-stability wet foam for use in porous ceramics.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.216-223
• /
• 2019

이 연구의 목적은 바텀애시 골재와 기포를 융합한 경량 콘크리트(bottom ash based lightweight concrete, LWC-BF)의 압축 응력-변형률 모델 제시이다. Yang 등이 제시한 응력-변형률 곡선식에서 LWC-BF 9 배합의 실험으로부터 얻은 탄성계수, 최대응력 시 변형률 그리고 최대응력 이후 최대응력의 50% 응력 시 변형률 값들을 이용하여 상승부와 하강부의 기울기를 결정하였다. 제시된 모델은 기포 혼입율의 증가와 함께 감소되는 초기 강성 및 증가되는 하강부 기울기를 잘 반영하면서 실험결과와 잘 일치하였다. 제시된 모델의 예측값과 실험값의 평균제곱근 오차로부터 결정된 평균값과 표준편차는 각각 0.19와 0.08로서 각각 1.23과 0.47 값을 보이는 fib 2010 모델에 비해 현저히 낮았다.

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2003년도 춘계 수산관련학회 공동학술대회발표요지집
• /
• pp.219-220
• /
• 2003

The success of recirculating system depends largely on the treatment efficiency of waste generated in the system. fine solids were suspected to be responsible for fish kill in a recirculating system. Clogging of biofilter may be induced by high solids concentration in recirculating systems. Also, the solids could generate more ammonia nitrogen and oxygen demand if not removed out of recirculating system as soon as possible (Weeks et al., 1992). (omitted)

• 한국가금학회지
• /
• 제16권1호
• /
• pp.17-22
• /
• 1989

난백의 열광수성을 순화시키기 위하여 각종금속염(Fe$^{2＋}$, Fe$^{3+}$ , $Al^{3+}$ , Cu$^{2＋}$)을 첨가하고 가훈처리($60^{\circ}C$, 5분간) 전후 난백의 기능성을 검토하였으며 알루미늄염(Al$^{3+}$ )이 첨가된 난백의 pH에 대한효과도 검토하였다. 금속염의 첨가에 의해 가열처리 전후 난백의 탁도는 대체로 증가하였으나 알루미늄염의부가시 탁도의 변화가 가장 작았다. 난백의 기포력은 금속염의 첨가에 의해 전반적으로 증가하였으며 Fe$^{3+}$ 의 첨가효과가 가장 컸다. 특히 가열처리 후 난백의 기포력은Fe$^{3+}$ , Al/ sup 3＋/ 및 Cu$^{2＋}$의 첨가에 의해 크게 증가되었다. 기포안정성의 경우 열처리 전에는 Fe$^{3+}$ , Al/ sup 3＋/의 첨가효과가 있었으나 열처리 후에는 Fe$^{3+}$ 와 Al/ sup 3＋/의 첨가가 효과적이었다. 한편 알루미늄염을 첨가한 난백을 pH 7 -10의 범위에서 가열처리한 결과 pH 7-8.5 범위에서는 탁도 및 기포성의 변화가 크지 않았고 pH 9이상에서는 탁도와 기포성은 낮아졌으나 기포안정성은 향상되었다. 난백액에 Salmonella typhimurium을 $10^{6}$ cells/$m\ell$수준으로 접종 후 $60^{\circ}C$, 5분간의 가열처리 결과 pH에 상관없이 모두 사멸되었다.

• Composites Research
• /
• 제27권4호
• /
• pp.130-134
• /
• 2014

본 논문에서는 Kim 등[7]이 제시한 4가지의 다른 밀도를 갖는 원통형 시험편으로한 EPP(Expanded polypropylene)의 준정적(Quasi-static test) 및 충격 시험(Impact test) DB를 바탕으로 Jeong 등[12]이 제시한 폴리우레탄(Polyurethane)에 대한 구성방정식을 EPP 폼에 대하여 다시 정의 하여 충격량-운동량 이론을 접목시켜 새로운 구성방정식을 제안하기위한 DB 구축을 목표로 하였다.

• 한국수소및신에너지학회논문집
• /
• 제35권2호
• /
• pp.152-161
• /
• 2024

In this study, a fuel cell system for future defense unmanned vehicles was designed and validated. A Co/Al₂O₃-Ni foam catalyst for NaBH₄ hydrolysis was characterized using several analytical methods. A NaBH₄ hydrogen generation system with the Co/Al₂O₃-Ni foam catalyst continuously generated hydrogen at elevated reaction temperatures. The fuel cell system with the NaBH₄ hydrogen generation system was designed and tested. The performance of the fuel cell system was comparable to that of the fuel cell system using pure hydrogen. Therefore, the fuel cell system with the NaBH₄ hydrogen generation system is a suitable power source for future defense unmanned vehicles owing to its easy refueling and simple system.

• 한국주조공학회지
• /
• 제17권1호
• /
• pp.93-99
• /
• 1997

A possibility of production of aluminium matrix composites by using the lost foam process was investigated. Silicon carbide particles, graphite particles, and stainless steel wires were used as reinforcement materials. The reinforcement materials were introduced to the polystyrene to form patterns via injection molding process. The results obtained from this experiment can be summarized as follows. In Al/SiCp system, the particles with the radius of $100{\mu}m$ and over were entrapped in the matrix in the case of upward freezing of which solidification direction was opposite to floating direction of the particles. And few particles were entrapped in the matrix in downward freezing. In Al/graphite system, almost no particles were entrapped in the matrix except the area chill attatched. When the thickness of polystyrene slice was 4mm in Al/stainless steel wire system, the floating tendency of fibers was observed to increase as the distance from the ingate was increased.

• 한국재료학회지
• /
• 제12권9호
• /
• pp.729-734
• /
• 2002

Porous Al metal was produced by batch type casting process. In this foaming process, the viscosity and surface tension of molten Al as two most important factors have been investigated in the temperature range of 680-95$0^{\circ}C$ by the ring method and rotational method respectively. The experimental results showed that both the surface tension and viscosity of the melt decreased linearly with increasing temperature. Addition of Ca decreased surface tension, but increased viscosity significantly.