• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.73.1-73.1
• /
• 2010

태양광 시장은 세계적인 금융 위기 속에서도 점점 그 규모가 확대되고 있다. 시장의 규모가 확대되고 있음에도 불구하고 금융 위기를 겪으면서 생산자 중심의 시장에서 수요자 중심의 시장으로 바뀌게 되었다. 이에 따라 더 적은 비용으로 높은 출력의 제품만이 경쟁력을 가지게 됨으로써 효율이 더욱 이슈화되었다. 여러 태양전지 중 가장 점유율이 높은 결정질 태양전지는 일반적인 양산 공정만으로 효율을 높이는데 한계가 있으므로 selective emitter, back contact, light induced plating 등의 새로운 공정을 도입하여 효율을 높이려는 경향이 나타나고 있다. 본 연구에서는, ALD 장치를 사용하여 결정질 태양전지의 후면을 passivation 함으로써 효율을 높이는 방법을 모색하였다. 부동화 층으로는 $Al_2O_3$를 사용하였으며 셀을 제조하여 평가하였다. 실험방법은 p-type의 웨이퍼를 이용하여 습식으로 texturing 후 $POCl_3$ 용액으로 p-n junction을 형성하였고 anti-reflection 막인 SiNx는 PECVD를 사용하여 R.I 2.05, 80nm 두께로 증착하였다. 그런 다음 후면의 n+ layer를 제거하기 위하여 SiNx에 영향을 미치지 않는 용액을 사용하여 후면을 식각하였다. BSF 층은 screen printer로 Al paste를 printing하여 형성하였고 Al etching용액으로 여분의 Al제거한 후 ALD 장치를 이용하여 $Al_2O_3$를 증착하였다. 마지막으로 전극을 형성한 후 laser로 isolation하여 효율을 평가하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.108-112
• /
• 2012

Crystalline silicon solar cell remains the major player in the photovoltaic marketplace with 90 % of the market, despite the development of a variety of thin film technologies. Silicon's excellent efficiency, stability, material abundance and low toxicity have helped to maintain its position of dominance. However, the cost of silicon photovoltaic remains a major barrier to reducing the cost of silicon photovoltaics. Using the crystalline silicon wafer with thinner thickness is the promising way for cost and material reduction in the solar cell production. However, the thinner thickness of silicon wafer is, the worse bow phenomenon is induced. The bow phenomenon is observed when two or more layers of materials of different temperature expansion coefficiencies are in contact, in this case silicon and aluminum. In this paper, the solar cells were fabricated with different thicknesses of Al layer in order to reduce the bow phenomenon. With lower paste applications, we observed that the bow could be reduced by up to 40% of the largest value with 130 micron thickness of the wafer even though the conversion efficiency decrease of 0.5 % occurred. Since the bowed wafers lead to unacceptable yield losses during the module construction, the reduction of bow is indispensable on thin crystalline silicon solar cell. In this work, we have studied on the counterbalance between the bow and conversion efficiency and also suggest the formation of enough back surface field (BSF) with thinner Al paste application.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.467-482
• /
• 2022

The Yeonghae basin is located at the northeastern part of the Yangsan fault (YSF; a potentially active fault). The study of the architecture of the Yeonghae basin is important to understand the activity of the Yangsan fault system (YSFS) as well as the basin formation mechanism and the activity of the YSFS. For this study, Digital Elevation Model (DEM) was used to highlight the marginal faults, and structural fieldwork was performed to understand the geometry of the intra-basinal structures and the nature of the bounding faults. DEM analysis reveals that the eastern margin is bounded by the northern extension of the YSF whereas the western margin is bounded by two curvilinear sub-parallel faults; Baekseokri fault (BSF) and Gakri fault (GF). The field data indicate that the YSF is striking in the N-S direction, steeply dipping to the east, and experienced both sinistral and dextral strike-slip movements. Both the BSF and GF are characterized dominantly by an oblique right-lateral strike-slip movement. The stress indicators show that the maximum horizontal compressional stress was in NNE to NE and NNW-SSE, which is consistent with right-lateral and left-lateral movements of the YSFS, respectively. The plotted structural data show that the NE-SW is the predominant direction of the structural elements. This indicates that the basin and marginal faults are mainly controlled by the right-lateral strike-slip movements of the YSFS. Based on the structural architecture of the Yeonghae basin, the study area represents a contractional zone rather than an extensional zone in the present time. We proposed two models to explain the opening and developing mechanism of the Yeonghae basin. The first model is that the basin developed as an extensional pull-apart basin during the left-lateral movement of the YSF, which has been reactivated by tectonic inversion. In the second model, the basin was developed as an extensional zone at a dilational quadrant of an old tip zone of the northern segment of the YSF during the right-lateral movement stage. Later on, the basin has undergone a shortening stage due to the closing of the East Sea. The second model is supported by the major trend of the collected structural data, indicating predominant right-lateral movement. This study enables us to classify the Yeonghae basin as an inverted strike-slip basin. Moreover, two opposite strike-slip movement senses along the eastern marginal fault indicate multiple deformation stages along the Yangsan fault system developed along the eastern margin of the Korean peninsula.