• 대한화학회지
• /
• 제37권9호
• /
• pp.787-792
• /
• 1993

$AlPO_4-5$ 분자체의 가교 OH 그룹에 대한 성질을 $AlPO_4-5$ 분자체의 구조 특성인 Al-O(P-O) 결합길이와 Al-O-P 결합각에 대한 관계를 알아보기 위하여 가교 $(OH)_3AlOP(OH)_3$ 와 $(OH)_3AlOHP(OH)_3^+$ 덩어리를 이용하여 반경험적 MNDO 계산 방법으로 연구하였다. 가교 OH 그룹의 O-H 결합해리에너지는 Al-O(P-O) 결합길이가 증가할수록, Al-O-P 결합각이 감소할수록 알 수 있었고, 가교 OH 그룹 생성은 Al-O(P-O) 결합길이가 길고, Al-O-P 결합각이 작은 가교 산소원자에서 형성된다는 것을 알았다. 또한 Al-O-P 결합각이 증가할수록 가교 산소원자의 음의 알짜전하는 증가하나 가교 수소원자의 양의 알짜전하는 감소함을 알았다.

• 청정기술
• /
• 제20권1호
• /
• pp.51-56
• /
• 2014

본 연구에서는 폴리술폰(polysulfone, PSf)으로 알루미늄 수산화물(aluminum hydroxide, $Al(OH)_3$)을 고정화한 PSf-$Al(OH)_3$ 비드를 제조하였다. 제조한 PSf-$Al(OH)_3$ 비드에 의한 불소 이온 제거실험은 회분식으로 수행하였으며, pH, 초기농도, 공존이온과 같은 변수들의 영향을 살펴보았다. Langmuir 등온식으로 구한 불소 이온의 최대 제거량은 52.4 mg/g이었으며, 최적 pH 범위는 4~10이었다. PSf-$Al(OH)_3$ 비드에 의한 불소 이온의 제거과정은 전 단계에서 외부물질전달이 나중 단계에서 내부확산이 지배인 것을 알 수 있었다. 또한 PSf-$Al(OH)_3$에 의한 불소 이온의 제거에서 $HCO_3{^-}$, $SO{_4}^{2-}$, $NO_3{^-}$, $Cl^-$와 같은 공존 음이온들은 불소 이온의 제거에 방해를 하는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.288-294
• /
• 2009

The platelet AlO(OH) nano colloids were prepared by hydrothermal reaction of the $\gamma-Al_2O_3$ obtained with dehydration of $\gamma$-AlO(OH) and dilute $CH_3COOH$ solution. In hydrothermal reaction process, reversible reaction was accompanied between $\gamma-Al_2O_3$ and AlO(OH), and hydrothermal reaction temperature, hydrothermal reaction time and $CH_3COOH$ concentration had an effect on the crystal structure, surface chemical property, surface area, pore characteristics and crystal morphology of the AlO(OH) nano colloid particles. In this study, it was investigated to the hydrothermal reaction condition of the AlO(OH) nano colloid for using catalyst support, heat resisting agent, adsorbents, binder, polishing agent and coating agent. The crystal structure, surface area, pore volume and pore size of the platelet AlO(OH) nano colloids were investigated by XRD, TEM, TG/DTA, FT-IR and $N_2$ BET method in liquid nitrogen temperature.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.100-108
• /
• 1989

Aluminum hydroxides were prepared by the alkoxide hydrolysis method using Al-isopropoxide as a starting material and NH4OH as a catalytic agent. When Al-isopropoxide was hydrolyzed in a H2O-NH3 system, only Al(OH)3 was obtained over all pH values. However, AlOOH was formed besides Al(OH)3 when Al-isopropoxide was hydrolyzed in a H2O-NH3-isopropyl alcohol system. The AlOOH/Al(OH)3 ratio was increased as the isopropyl alcohol content was increased. The hydroxides, Al(OH)3 and AlOOH, obtained in this study and the commerical products, $\alpha$-Al2O3 and AlOOH were subjected to the carbothermal reduction and nitridation reaction to product AlN powder, using carbon black as a reducing agent under N2 atmosphere at various temperatures. AlN was synthesized from the obtained Al(OH)3 and the commercial AlOOH at 145$0^{\circ}C$, however, synthesized from the obtained AlOOH and the commercial alpha-alumina at 135$0^{\circ}C$. The temperature difference is assumed to be attributed to the reactivity of those powders. AlN powder prepared from the Al-isopropoxide was observed to have the narrower particle size distribution than that prepared from the commercial $\alpha$-Al2O3 or AlOOH.

• 한국세라믹학회지
• /
• 제39권3호
• /
• pp.315-320
• /
• 2002

저농도로 희석된 HF 수용액(6 wt%)을 사용하여 $Al(OH)_3$의 표면을 F/Al의 몰비 0.15에서 처리하고, 처리 전후 표면특성을 관찰하였다. 반응계의 온도 및 pH 변화로부터 $Al(OH)_3$에 대한 HF의 표면반응은 HF와 접촉한 $Al(OH)_3$ 표면부에서 metastable한 ${\alpha}$형의 불화알루미늄$({\alpha}-AlF_3{\cdot}3H_2O)$이 안정한 ${\beta}$형의 불화알루미늄$({\beta}-AlF_3{\cdot}3H_2O)$으로 전이되는 과정으로 진행되며, 다량의 발열을 수반하면서 반응계의 온도상승을 유발하였다. 이러한 ${\beta}-AlF_3{\cdot}3H_2O$의 생성은 표면처리된 분말의 FT-IR 및 X-선 회절분석결과를 통해 확인되었다. ${\beta}-AlF_3{\cdot}3H_2O$의 morphology와 분포상태를 SEM을 통해 관찰한 결과 $Al(OH)_3$ 표면에 $1{\mu}m$ 이하의 미세분말 형태로 피복층을 형성하며 균일하게 분포된 것으로 확인되었다. HF로 처리된 시료의 표면 백색도는 미처리에 비해 약 6.6% 증가되었으며, 이는 $Al(OH)_3$보다 높은 백색도를 지닌 ${\beta}-AlF_3{\cdot}3H_2O$ 피복 효과 때문인 것으로 나타났다.

• 한국결정성장학회지
• /
• 제11권4호
• /
• pp.154-159
• /
• 2001

(Li,Al)$MnO_2(OH)_2$:Co 화합물의 합성르 수열법에 의해 행하였다. 출발원료는 $MnO_2$, LiOH.$H_2$O, $Co_3O_4$, $Al(OH)_3$이 사용되었으며, 단일상의 (Li,Al)$MnO_2(OH)_2$:Co 화합물을 얻을 수 있는 최적의 합성조건은 다음과 같았다. 반응온도 : $200^{\circ}C$ 반응시간 ; 3일간, 반응장치 ; 시이소형, 수열용매 ; 3M-KOH, (Li,Al)$MnO_2(OH)_2$:Co 의 원자비 = 1:2.1:2.5~2:0.5~1. 수열합성된 단사의 (Li,Al)$MnO_2(OH)_2$:Co 화합물은 결정성이 우수하였으며, 청색안료로써 천연 오수에 필적하는 발색효과를 나타내었다. 합성된 (Li,Al)$MnO_2(OH)_2$:Co 화합물의 형태는 육각 판싱이였으며, 입자의 크기는 0.5~1 $\mu\textrm{m}$의 미립자이였다.

• 청정기술
• /
• 제18권1호
• /
• pp.63-68
• /
• 2012

본 연구에서는 베이어공정에 의해서 수산화알루미늄($Al(OH)_3$)을 합성하였으며, 고순도 알루미나를 합성하기 위하여 염산 및 초산과 같은 산성용액을 사용하여 $Al(OH)_3$에 함유된 나트륨을 제거하였다. 호주의 퀸즐랜드 주에서 생산된 보크사이트가 베이어공정에 의해 알루미나를 합성하기 위해 사용되었으며, 보크사이트는 attrition mill을 이용하여 10 ${\mu}m$ 이하의 분말로 분쇄하여 사용되었다. 보크사이트에 함유된 알루미나 성분을 용출하기 위하여 분쇄된 보크사이트를 5 N의 NaOH 수용액으로 처리하였으며, 고압반응기 내에서 보크사이트로부터 알루미나의 용출은 $140^{\circ}C$, 3.4 atm에서 수행되었다. 용출 후 고체시료인 레드 머드는 여과에 의해서 액체시료와 분리되었다. 보크사이트와 여과된 레드 머드에 함유된 알루미늄 함량과 구조변화를 XRD와 EDX로 분석하였다. 또한 분리된 용액에 함유된 알루미나는 씨드 물질로 사용된 $Al(OH)_3$의 첨가에 위해서 $Al(OH)_3$로 결정화되었다. 결정화 과정에서 얻어진 $Al(OH)_3$는 증류수에 의해서 수차례 수세과정으로 정제되었다. 또한 산성 용액에 의해서 $Al(OH)_3$에 함유된 나트륨이 제거되는 것을 확인되었다. $Al(OH)_3$ 분말의 순도는 물에 의한 세정으로 99.3%로 생산되었고, 산 처리에 의해서 나트륨의 함량은 약 0.009% 정도로 감소되었다.

• 한국표면공학회지
• /
• 제1권1호
• /
• pp.14.1-18
• /
• 1967

The characteristics of sulfuric acid anodized layer was studied under various Conbitions, acid concentration : 5-20%, temperature : 5-25$^{\circ}C$, bath voltate : 16 volts , bath agitain : mech agitation : mechanical . The Al+++ ion increase in anodizing baty, the film thickness under microscope, the comparative porosity and the thickness were determined. It was found that film thickness and the porosithy which are the main factors of determining andoized layet quality, rule the corrosing and abrasiion tesistance of the film, and that the porosity is increasing in the outerlayer. The formation mechanism was assumed as follows : The film thickness -increase is due to OH_ ion diffusion into compact non-conductive layer and Al+ + OH_ \longrightarrowAl(OH), Al(OH)+ + OH_ \longrightarrowAl(OH)+$_2$ , Al(OH)+$_2$ + OH_ \longrightarrowAl(OH)$_3$., the strong adhesion force is alse due to Al(OH) or Al(OH)$_2$ in transtion layer. And the pore-nucleation is produced by volume change between Al and Al$_2$O$_3$ and activated H$_2$O gas created by large reaction heat of Al+(x) +OH_ \longrightarrowAl(OH)x.

• 한국세라믹학회지
• /
• 제19권4호
• /
• pp.287-292
• /
• 1982

Nonohmic properties of ZnO ceramics with various small amounts of additives were studied in relation to experimental methods, additive contant and sintaring temperature. The kinds of additives used to following chemicals were basic additives ($0.5Bi_2O_3$, $0.3BaCO_3$, $0.5MnCO_3$, $0.5Cr_2O_3$, $0.1KNO_3$), $TiO_2$ and $Al(OH)_3$. Expecially, this study has focused on the effectsof $TiO_2$ and $Al(OH)_3$ in ZnO ceramics with the basic additives. SEM studies indicated that the addition of TiO2 promoted grain growth but retarded grain growth with the addition of $Al(OH)_3$. Also, in the case of calcination of ZnO with $TiO_2$ and ZnO with $Al(OH)_3$ previously, grain size of ZnO with $TiO_2$ was larger and that of ZnO with Al(OH)3 was smaller in comparison to the case with out calcination. From the viewpoint of nonohmic exponent and nonohimic resistance, electrical characteristics of ZnO, $TiO_2$ and the basic additives was more effective than that of ZnO, $Al(OH)_3$ and the basic additives. Nonohmic exponent and nonohmic resistance of ZnO, $TiO_2$ and the basic additives was 11-13 and 40-65 respectively.

• 환경위생공학
• /
• 제15권1호
• /
• pp.95-101
• /
• 2000

This study was investigated to the reaction of alumina sintering with alkaline. The soluble $NaAlO_2$ was made after the commercial ${\alpha}-Al_2O_3$ was calcinated with NaOH. The reaction of alumina was carried out to be based on the effects of calcination temperature, time, and the mixing ratio of ${\alpha}-Al_2O_3/NaOH$. The alumina was calcined over $500^{\circ}C$ with NaOH powder after it was sieved with 170/270 mesh. The calcined alumina with NaOH powder was dissolved into $25^{\circ}C$ distilled water and filtrated, and HCI was added to adapt pH 6.5~7.5. The residue was separated with vacuum pump for filtration after it was adapted to proper pH, and aluminum compound was precipitated with $Al(OH)_3$. The investigation was carried out with the variables; the calcination temperature($500-900^{\circ}C$), the calcination time (30~90 min), and the concentration of HCI when leaching(0.5~3.0N) respectively. In this investigation, the main product of ${\alpha}-Al_2O_3$ and NaOH was $NaAlO_2$ and the maximum conversion ratio was 91.4% under the optimum conditions as followed ; the ratio of NaOH/${\alpha}-Al_2O_3$ was 1.5 and the calcination conditions were $800^{\circ}C$ and 90 min.