• 한국전산유체공학회지
• /
• 제10권2호
• /
• pp.60-68
• /
• 2005

For study on the unsteady wall interference effect, flows around a forced oscillating airfoil in closed test-section wind tunnels have been numerically investigated by solving compressible Navier-Stokes equations. The numerical scheme is based on a node-based finite-volume method with the Roe's flux-difference splitting and an implicit time-integration method coupled with dual time-step sub-iteration. The Spalart-Allmaras one-equation model is employed for the turbulence effect. The computed results of the oscillating airfoil having a thin wake showed that the lift curve slope is increased and the magnitude of hysteresis loop is reduced by the interference effects. Since the vortex around the airfoil is generated and convected downstream faster than the free-air condition, the phase of lift, drag and pitching moment coefficients was shifted. The pressure on the test section wall shows harmonic terms having the oscillating frequency contained in the wail effect.

• Advances in Computational Design
• /
• 제7권1호
• /
• pp.69-79
• /
• 2022

In this research, the aeroelastic instability of a tail section manufactured from aluminum isotropic material with different shell thickness investigated. For this purpose, the two degrees of freedom flutter analytical approach are used, which is accompanied with simulation by finite element analysis. Using finite element analysis, the geometry parameters such as the center of mass, the aerodynamic center and the shear center are determined. Also, by simulation of finite element method, the bending and torsional stiffnesses for various thickness of the airfoil section are determined. Furthermore, using Lagrange's methods the equations of motion are derived and modal frequency and critical torsional/bending modes are discussed. The results show that with increasing the thickness of the isotropic airfoil section, the flutter and divergence speeds increased. Compared of the obtained results with other research, indicates a good agreement and reliability of this method.

• 한국항공운항학회지
• /
• 제19권4호
• /
• pp.24-29
• /
• 2011

Conceptual study of an open-circuit type low-speed wind tunnel for performance test of wind turbine blade and airfoil is conducted. The tunnel is constituted of a settling chamber, a contraction, closed test section, a diffuser, two corners, a cross leg and a fan and motor. For the performance test, the closed test section width of 1.8 m, height of 1.8 m and length of 5.25 m is selected. The contraction ratio is 9 to 1 and maximum speed in the test section is 67 m/sec. Input power in the tunnel is about 238 kW and its energy ratio is 3.6. The wind tunnel designed in present study will be an effective tool in research and development of wind turbine and airfoil.

• International Journal of Aerospace System Engineering
• /
• 제2권2호
• /
• pp.10-14
• /
• 2015

To design airfoils for novel airplanes, new knowledge of aerodynamics is required. In this study, modified Parametric SECtion (PARSEC) which is a airfoil representation is applied to airfoil design using a multi-objective genetic algorithm to obtain an optimal airfoil for consideration in the development of a Martian airplane. In this study, an airfoil that can obtain a sufficient lift and glide ratio under lower thrust is considered. The objective functions are to maximize maximum lift-to-drag ratio and to maximize the trailing edge thickness. In this way, information on the low Reynolds number airfoil could be extracted efficiently. The optimization results suggest that the airfoil with a sharper thickness at the leading edge and higher camber at the trailing edge is more suitable for a Martian airplane. In addition, several solutions which has thicker trailing edge thickness were found.

• Wind and Structures
• /
• 제7권3호
• /
• pp.187-202
• /
• 2004

Wind tunnel experiments are often performed for the identification of aeroelastic parameters known as flutter derivatives that are necessary for the prediction of flutter instability for flexible structures. Experimental determination of all the eighteen flutter derivatives for a section model facilitates complete understanding of the physical mechanism of flutter. However, work in the field of identifying all the eighteen flutter derivatives using section models with all three degree-of-freedom (DOF) has been limited. In the current paper, all eighteen flutter derivatives for a streamlined bridge deck and an airfoil section model were identified by using a new system identification technique, namely, Iterative Least Squares (ILS) approach. Flutter derivatives of the current bridge and the Tsurumi bridge are compared. Flutter derivatives related to the lateral DOF have been emphasized. Pseudo-steady theory for predicting some of the flutter derivatives is verified by comparing with experimental data. The three-DOF suspension system and the electromagnetic system for providing the initial conditions for free-vibration of the section model are also discussed.

• Journal of Mechanical Science and Technology
• /
• 제19권11호
• /
• pp.2016-2024
• /
• 2005

In this work, a mixed beam approach that combines both the stiffness and the flexibility methods has been performed to analyze the coupled composite blades with closed, two-cell cross-sections. The Reissner's semi-complementary energy functional is used to derive the beam force-displacement relations. Only the membrane part of the shell wall is taken into account to make the analysis simple and also to deliver a clear picture of the mixed method. All the cross section stiffness coefficients as well as the distribution of shear across the section are evaluated in a closed-form through the beam formulation. The theory is validated against experimental test data, detailed finite element analysis results, and other analytical results for coupled composite blades with a two-cell airfoil section. Despite the simple kinematic model adopted in the theory, an accuracy comparable to that of two-dimensional finite element analysis has been obtained for cases considered in this study.

• 대한조선학회논문집
• /
• 제39권4호
• /
• pp.17-23
• /
• 2002

2차원 익렬 익형의 표면에 목적하는 압력계수 분포를 설정하고 그 압력계수의 분포에 해당하는 형상을 설계하기 위해 임의의 초기형상으로부터 목적 형상에 근접해가도록 최적화 기법을 도입하여 역설계를 수행하였다. 목적함수인 표면압력계수를 구하기 위해 비직교 일반좌표계상의 2차원 비압축성 나비어-스톡스 방정식을 사용하였으며 목적함수의 감소를 위해서는 최속강하법과 공액 경사도 방법을 사용하였다. 해의 탐색방향을 위해 1차 정확도의 유한 차분화를 행하였고, 해의 탐색거리를 위해 황금분할법을 사용하였다. 본 연구의 결과, 목적한 형상으로의 수렴성이 뛰어남을 확인할 수 있었다.

• 한국항공우주학회지
• /
• 제36권12호
• /
• pp.1146-1151
• /
• 2008

본 연구에서는 플래핑 운동하는 에어포일에 대한 비틀림 유연성의 영향을 조사하였다. 비틀림 유연성이 있는 에어포일의 공기력은 2차원 비정상 와류 패널 방법을 이용하여 계산하였다. 플래핑 에어포일의 공탄성 해석을 위해 2차원의 typical section 모델이 사용되었다. 주요한 파라미터로서 비틀림 유연성과 가진주파수가 고려되었다. 인 무거운 에어포일 조건에서는 주파수비가 0.75 부근에서 추력 최대점이 발견되었다. 이 추력치를 경계로 두 가지 다른 운동이 관찰되었으며, 하나는 관성 지배 운동(inertia driven deformation motion)이고, 다른 하나는 진동 지배 운동(oscillation driven deformation motion)이다. 또한, 최대 추력 상태에서는 비틀림 유연성과 가진주파수에 관계없이 위상각이 85도를 유지하였다.

• 한국항공우주학회지
• /
• 제40권6호
• /
• pp.485-491
• /
• 2012

저 레이놀즈 수 조건에서 폐쇄형 풍동 시험부에 설치된 에어포일 주위의 벽면효과에 대한 실험적 연구를 수행하였다. 이를 위해 풍동시험이 수행되었으며, 시험은 자유흐름속도 10 ~ 31 m/s와 시위기준 레이놀즈 수 $1.5{\times}10^5{\sim}4.6{\times}10^5$ 조건에서 수행되었다. 시위대 시험부 폭 비인 기준폐쇄율은 27.8%, 38.5%, 41.7%, 45.5% 그리고 55.6%이다. 시험 결과 벽면효과에 의해 에어포일 표면에서의 천이점이 후방으로 미미하게 이동함을 확인하였다. 또한, 벽면압력을 이용한 벽면효과 보정을 위해서는 에어포일을 중심으로 시위의 세배 이상의 벽면압력이 필요함을 확인하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.187-190
• /
• 2005

A simple beam model based on a mixed method is proposed for the analysis of thin-walled composite blades with a two-cell airfoil section. A semi-complementary energy functional is used to obtain the beam force-displacement relations. The theory accounts for the effects of elastic couplings, shell wall thickness, warping, and warping restraint. All the kinematic relations as well as the cross-section stiffnesses are evaluated in a closed-form through the current beam formulation. The theory has been applied to two-cell composite blades with extension-torsion couplings and fairly good correlation has been observed in comparison with a detailed analysis and other literature.