• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.57-60
• /
• 2012

본 연구에서는 현재 국내외에서 연구 중인 Blended Wing Body(BWB) 항공기의 엔진흡기 유동을 해석하기 위해 익형과 비행조건을 변화시켜 가며 전산유체해석을 수행하였다. 엔진의 위치에 따라 엔진이 효율적으로 동작하기 위한 조건인 흡기에서의 유동 속도와 그 분산을 중심으로 해석한 결과 익형 표면에서는 경계층의 영향으로 엔진흡기에서 유동속도가 낮고, 속도분산이 높음을 확인할 수 있었다. 한편, 익형 아랫면에서는 높은 비행속도에서 속도분산이 급격히 증가하였다. 이를 통해, 해석에 사용한 익형이 BWB의 동체로 활용하기에 적합한 엔진흡기조건을 갖는지 판별하였다.

• Journal of Power System Engineering
• /
• v.20 no.2
• /
• pp.26-31
• /
• 2016

The studies on the efficient ventilator to reduce fire and save energy have been proceeded actively. The purpose of this paper is to design a ventilator used in residential wood stove. The ventilator consists of rotation and support part, and it is operated by natural wind without power. The shape of rotation part of the ventilator is like airfoil to reinforce pressure drop. We designed direction controller for the rotation part to track the direction of wind continuously. The rotation and support part have point-contact each other to minimize a friction. We verify the properties of the proposed ventilator though simulation and experiment. The results show the proposed ventilator can exhaust safely combustion gas of the stove more than other ventilator.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.6 s.27
• /
• pp.7-14
• /
• 2004

A new electrostatic rotary atomizing painting equipment using air turbine was developed for high transfer efficiency. Based on the overall design requirements of painting equipment, basic design specifications of the equipment parts such as air turbine and atomizing disk ate defined from the present conceptual design model. Air turbine is designed with the section profile of NACA airfoil, and its internal flow field is analyzed by commercial CFD code. Atomizing disk is designed to achieve the ligament type spray of paint with the use of visualization technique. Various experiments and tests are conducted to investigate the spray and the transfer characteristics of newly-designed painting equipment, and the measurement results are compared with the those of conventional painting equipments. The comparison results show the present painting equipment is superior to the conventional ones in the aspects of transfer efficiency and coating surface characteristics.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.5
• /
• pp.333-340
• /
• 2001

A centrifugal water chiller using alternative refrigerant R134a have been developed. The prototype was designed to have refrigeration capacity of 300RT. Its compressor employs a single high-speed impeller, airfoil diffuser and collector. Newly developed enhanced tubes were installed in the evaporator and the condenser to reduce the required head for the compressor. Off-design characteristics at various conditions, performance test of the compressor and analysis of the refrigeration cycle were performed. So the probability of use in part load condition was checked and the direction for revision was suggested.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.684-690
• /
• 2003

A new electrostatic rotary atomizing painting equipment using air turbine was developed. Based on the overall design requirements of painting equipment basic design specifications of the equipment parts such as air turbine and atomizing disk are defined from the present conceptual design model. Air turbine is designed with the section profile of NACA airfoil, and its internal flow field is analyzed by commercial CFD code. Atomizing disk is designed to achieve the ligament type spray of paint with the use of visualization technique. Various experiments and tests are conducted to investigate the spray and the transfer characteristics of newly-designed painting equipment, and the measurement results are compared with the those of conventional painting equipments.

• International Journal of Fluid Machinery and Systems
• /
• v.9 no.4
• /
• pp.362-369
• /
• 2016

The shock-free inflow criterion applied in the development of two-dimensional cascade for turbomachinery design. The developed cascade analysis with potential flow calculation through a panel method has been used to determine the shock-free inflow condition. The combination between cascade analysis and PSO (particle swarm optimization) algorithm provides an opportunity to develop a diagram of a two-dimensional parameter cascade at various airfoil shapes. Analytical equations have been derived from the diagram that will facilitate the turbomachinery designer in applying the shock-free inflow criterion on their developed cascade. This method has been used to develop the very low head axial hydraulic turbine and provides excellent results of numerical and actual prototype performances.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.638-642
• /
• 2016

현재 양력발생의 원리는 긴 경로 이론과 동시 통과 이론 등으로 알려져 있으며, 이 이론들은 간단히 설명하려는 목적으로 인해 양력발생의 원리가 와전되어왔다. 본 연구에서는 여러 양력발생의 원리 중 Kutta-Joukowski의 이론을 이용하여 순환을 통한 양력발생의 관계에 대해 연구를 수행하였다. 해석 모델은 대칭형 에어포일인 NACA0012를 이용하였다. 해석 프로그램으로는 EDISON을 이용하였으며 시간에 따른 와도를 확인하기 위해 비정상상태 해석을 진행하였다. 그 결과 유동이 시간의 경과에 따라 에어포일 뒷전으로 밀려나면서 Kutta-Joukowski의 이론에 중요한 논점인 출발 와류가 생성됨을 확인할 수 있었다. 이로 인해 순환이 형성되어 양력이 발생함을 추측할 수 있다. 추가적으로 받음각과 출발 와류 사이의 영향성을 연구하였다. 받음각이 커짐에 따라 출발 와류가 에어포일 뒷전에서 더 크게 발생하였고, 받음각이 낮아질수록 출발 와류의 진행이 가속화됨을 확인할 수 있었다.

• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.58-62
• /
• 2016

본 연구에서는 지면효과의 영향을 비행체의 형상에 따라 비교하기 위해 에어포일, 플랩을 장착한 에어포일 그리고 플라잉디스크를 EDISON_CFD를 통해 해석하고자 한다. 받음각 $0^{\circ}$, $5^{\circ}$, $10^{\circ}$에 대하여 마하수 0.18, 단위 길이 당 레이놀즈수 $3.78{\times}10^{-5}/m$의 유동조건에서 2차원 범용 소프트웨어인 KFLOW_EDISION_13의 S-A Turbulent Model을 이용하여 지면과의 높이를 형상 코드길이를 기준으로 0.25c, 0.5c, 1c, 3c로 변경하면서 해석을 수행하였다. 그 결과 세 형상 모두 일반적인 지면효과인 지면과 가까울수록 양력계수는 증가, 항력계수는 감소하여 양항비가 증가하는 경향을 보여주었다. 하지만 일부 예외적인 부분을 확인하여 분석을 실시하였다.

• Advances in aircraft and spacecraft science
• /
• v.4 no.2
• /
• pp.203-218
• /
• 2017

This paper focuses on the computational study of nonlinear effects of unsteady aerodynamics for non-classical aileron buzz. It aims at a comprehensive investigation of the aileron buzz phenomenon under varying flow parameters using the describing function technique with multiple inputs. The limit cycle oscillatory behavior of an asymmetrical airfoil is studied initially using a CFD-based numerical model and direct time marching. Sharp increases in limit cycle amplitude for varying Mach numbers and angles of attack are investigated. An aerodynamic describing function is developed in order to estimate the variation of limit cycle amplitude and frequency with Mach number and angle of attack directly, without time marching. The describing function results are compared to the amplitudes and frequencies predicted by the CFD calculations for validation purposes. Furthermore, a limited sensitivity analysis is presented to demonstrate the potential of the approach for aeroelastic design.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.3
• /
• pp.67-72
• /
• 2013

In this study, numerical analyses that considered the dynamic interaction effects between the flow and a turbine were carried out to investigate the power output performance of an H-type Darrieus turbine rotor, which is one of the representative lifting-type vertical-axis tidal-current turbines. For this purpose, a commercial CFD code, Star-CCM+, was utilized for an example three-bladed turbine with a rotor diameter of 3.5 m, a solidity of 0.13, and the blade shape of an NACA0020 airfoil, and the optimal tip speed ratio (TSR) and corresponding maximum power coefficient were evaluated through exhaustive simulations with different sets of flow speed and external torque conditions. The optimal TSR and maximum power coefficient were found to be approximately 1.84 and 48%, respectively. The torque and angular velocity pulsations were also investigated, and it was found that the pulsation ratios for the torque and angular velocity were gradually increased and decreased with an increase in TSR, respectively.