• 대한기계학회논문집B
• /
• 제29권10호
• /
• pp.1163-1171
• /
• 2005

The shape optimization of an airfoil has been performed for an incompressible viscous flow. In this study, Pareto frontier sets, which are global and non-dominated solutions, can be obtained without various weighting factors by using the multi-objective genetic algorithm An NACA0012 airfoil is considered as a baseline model, and the profile of the airfoil is parameterized and rebuilt with four Bezier curves. Two curves, front leading to maximum thickness, are composed of five control points and the rest, from maximum thickness to tailing edge, are composed of four control points. There are eighteen design variables and two objective functions such as the lift and drag coefficients. A generation is made up of forty-five individuals. After fifteenth evolutions, the Pareto individuals of twenty can be achieved. One Pareto, which is the best of the . reduction of the drag furce, improves its drag to $13\%$ and lift-drag ratio to $2\%$. Another Pareto, however, which is focused on increasing the lift force, can improve its lift force to $61\%$, while sustaining its drag force, compared to those of the baseline model.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.193-196
• /
• 2004

Numerical optimization method of long endurance airfoil has been performed with a RSM(Response Surface Method) for smart UAV wing design. For the base line airfoil, NACA 64621 airfoil was selected and optimized to satisfy long endurance condition for smart UAV Aerodynamic coefficients required for RSM are obtained by using 2-D Navier-Stokes solver with Spalart-Allmaras turbulence model. The optimized airfoil showed increased maximum lift and endurance factors together with reasonable thickness ratio.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.647-652
• /
• 2016

To reduce drag force at supersonic speeds, sharp leading edge is hugely efficient. It is, however, incompatible with leading edge shape to have fine aerodynamic characteristics at subsonic and transonic speeds. It is critical to reduce drag force for enhanced cruise performance and higher efficiency. An air superiority fighter, however, required to have high maneuverability for survivability, and sharp leading edge is not proper. Consequently, variable leading edge is demanded to reduce drag force significantly at supersonic speeds for cruise performance. Leading edge altering system is constructed with rigid material to improve possibility of realization, and minimized movement of its components in altering for reduce effects on flight. It is compared with bi-convex airfoil and NACA 65-006 airfoil, which have comparable maximum thickness. At Mach number 1.7 and zero angle of attack, supersonic mode of designed airfoil indicates approximately 17% higher drag coefficient than the bi-convex airfoil indicates, it is, however, 23% lower than the NACA 65-006 indicates. Also, subsonic mode of the designed airfoil shows fine aerodynamic characteristics in comparison with NACA 65-006 airfoil in subsonic and transonic speed range. In this regard, design of the airfoil achieved the object of this study satisfactorily.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.1014-1019
• /
• 2001

A numerical investigation was performed to determine the effect of airfoil on the optimum flap height using NACA 00XX and 44XX airfoils. The six flaps which have 0.5% chord height difference were selected. A Navier-Stokes code, FLUENT, was used to calculate the flow field of the airfoil. The code was first tested as a benchmark by modelling flow around a NACA 4412 airfoil. Predictions of local pressure coefficients are found to be in good agreement with the result of the experimental result. For every NACA 00XX and 44XX airfoil, flap heights ranging from 0.0% to 2.5% chord were changed by 0.5% chord interval and their effects were also studied. Representative results from each case are presented graphically and discussed. It is concluded that this initial approach gives an idea for the future development of the wind turbine optimum design.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권5호
• /
• pp.1091-1097
• /
• 2001

A numerical investigation was performed to determine the effect of airfoil on the optimum flap height using NACA 00XX and 44XX airfoils. The six flaps which have 0.5% chord height difference were selected . A Navier-Stokes code, FLUENT, was used to calculate the flow field of the airfoil. The code was first tested as a benchmark by modelling flow around a NACA 4412 airfoil. Predictions of local pressure coefficients are found to be in good agreement with the result of the experimental results. For every NACA 00XX and 44XX airfoil, flap heights ranging from 0.0% to 2.5% chord were changed by 0.5% chord interval and their effects were also studied. Representative results from each case are presented graphically and discussed. It is conclued that this initial approach gives an idea for the future development of the wind turbine optimum design.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.58-62
• /
• 2001

A numerical investigation was performed to determine the effect of airfoil on the optimum flap. height using NACA 0006, 0009, 0012, 0015, 0018, 0021 and 0024 airfoils. The six flaps which have 0.5% chord height difference were used. A Navier-Stokes code, FLUENT, was used to calculate the flow field of the airfoil. The code was first tested as a benchmark by modelling flow around a NACA 4412 airfoil. Predictions of local pressure coefficients are found to be in good agreement with the result of the experimental result. For every NACA 00XX airfoil, flap heights ranging from 0.0% to 2.5% chord were changed by 0.5% chord interval and their effects were also studied. Representative results from each case are presented graphically and discussed. It is concluded that this initial approach gives a promise for the future development of wind turbine optimum design.

• 한국항공우주학회지
• /
• 제34권2호
• /
• pp.1-10
• /
• 2006

본 연구에서는 수치적 방법을 이용하여 타원형 익형의 공력특성에 대한 연구를 수행하였다. 타원형 익형의 경우 현재까지 널리 사용되어진 NACA 계열 익형들에 비하여 작은 앞전 곡률반경을 가진다. 또한 NACA 계열 익형들과는 달리 앞전과 같은 곡률반경을 가지는 뒷전 형상을 가지며, 익형의 최대 두께가 시위의 1/2지점에 존재한다. 타원형 익형의 경우 이러한 형상적인 특징들에 의하여 NACA 계열 익형들과는 다른 공력특성을 나타내는데, 본 연구에서는 같은 최대 두께를 가지는 NACA 계열 익형과 타원형 익형의 다양한 유동조건에서의 공력특성에 대한 수치해석 결과의 비교를 통하여 타원형 익형의 공력특성에 대하여 살펴보았다. 또한 타원형 익형의 두께변화에 따른 공력특성의 변화 역시 함께 고려하였다.

• Journal of Mechanical Science and Technology
• /
• 제17권8호
• /
• pp.1234-1245
• /
• 2003

An experimental study was carried out to investigate the reduced frequency effect on the near-wake of an elliptic airfoil oscillating in pitch. The airfoil was sinusoidally pitched around the center of the chord between -5$^{\circ}$and ＋25$^{\circ}$angles of attack at an airspeed of 3.4 m/s. The chord Reynolds number and reduced frequencies were 3.3 ${\times}$10$^4$, and 0.1, 0.7, respectively Phase-averaged axial velocity and turbulent intensity profiles are presented to show the reduced frequency effects on the near-wake behind the airfoil oscillating In pitch. Axial velocity defects in the near-wake region have a tendency to increase in response to a reduced frequency during pitch up motion, whereas it tends to decrease during pitch down motion at a positive angle of attack. Turbulent intensity at positive angles of attack during the pitch up motion decreased in response to a reduced frequency, whereas turbulent intensity during the pitch down motion varies considerably with downstream stations. Although the true instantaneous angle of attack compensated for a phase-lag is large, the wake thickness of an oscillating airfoil is not always large because of laminar or turbulent separation.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.34-40
• /
• 2008

The aeroelastic analyses for several wing models were performed using the transonic small-disturbance (TSD) equation, which is very efficient, to consider the aerodynamic nonlinearities in the transonic region. For more accurate aerodynamic analysis of airfoil and wing models with shock waves, the viscous equations based on the Green's lag-entrainment equation of boundary-layer effects were coupled with the TSD equation in the transonic region. Finally the aeroelastic characteristics of wing models were investigated through comparisons of the aeroelastic analysis results for wing models considering the change of a thickness of the airfoil section. Moreover, the results of the aeroelastic analysis using the coupled TSD equation with the viscous equations were compared with those using the TSD equation for several wing models.

• 대한기계학회논문집B
• /
• 제20권7호
• /
• pp.2347-2355
• /
• 1996

Purpose of the present study is to develop a computational design program for shape optimization, combining the numerical optimization technique with the flow analysis code. The present methodology is then validated in three cases of aerodynamic shape optimization. In the numerical optimization, a feasible direction optimization algorithm and shape functions are considered. In the flow analysis, the Navier-Stokes equations are discretized by a cell-centered finite volume method, and Roe's flux difference splitting TVD scheme and ADI method are used. The developed design code is applied to a transonic channel flow over a bump, and an external flow over a NACA0012 airfoil to minimize the wave drag induced by shock waves. Also a separated subsonic flow over a NACA0024 airfoil is considered to determine a maximum allowable thickness of the airfoil without separation.