• Journal of the military operations research society of Korea
• /
• v.30 no.2
• /
• pp.108-121
• /
• 2004

This paper deals with a procedure of changing the current inspection & replacement periods for ROKAF aircraft parts. ROKAF is mostly operating aircraft of foreign makes, and takes maintenance actions according to Technical Orders(TO.) published by foreign aircraft manufacturers. Therefore ROKAF inspects and replaces specific parts at the time noticed from T.O.. These inspection and replacement periods are determined by manufacturers according to the standard operating environment and parts' durability. But the standard operating environment Is different from operator's environment. Because of this difference, the inspection and replacement periods have to be changed according to operators' operation environment. It is resonable that the manufacturer, having design materials and life test data of parts, changes those periods together with materials of operators' operation environment. But we have many difficulties in obtaining the design materials and life test data. Then this paper proposes a procedure of changing the periods of aircraft's parts with life data obtained during operating aircraft. For the reliability analysis, a software of RELEST (Reliability Estimation Version 1.0) is used.

• Atmosphere
• /
• v.34 no.3
• /
• pp.273-281
• /
• 2024

Analyzing the information about climate change on Korean Peninsula is essential for the national defense. In this study, we used HadGEM3-RA model output (a member of CORDEX-EA) and analyzed the 3 operational weather factors (VMC, runway temperature, WBGT), which affect the aircraft field. The number of future limited days was quantitatively calculated based on the model outputs applying SSP1-2.6 and SSP5-8.5 and the operational limits of the previous three factors, and the spatial distribution, time series, and correlation of each result were analyzed. In conclusion, it was analyzed that the number of limited days by VMC would decrease, resulting from the rise in temperature and the drop in relative humidity. This means the operational environment in VMC will improve. On the other hand, the number of limited days by the runway temperature and WBGT would increase, resulting from the rise in temperature. This means the operational environment in runway temperature and WBGT will worsen.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.232-243
• /
• 2024

Purpose: Recently, large-scale forest fires caused by climate change, natural disasters, and human factors have been increasing every year in the East Coast and Taebaek Mountains region. Although forest fire extinguishing using helicopters is currently increasing, the need to introduce air force transport aircraft has continued to be raised due to the importance of early fire extinguishment to respond to large forest fires and the difficulty of extinguishing forest fires between sheep. This study seeks to present a plan for developing a post-fire management system for several aspects - achieving operational objectives, overcoming the operating environment, selecting a staging area, and efficient operation measures - to efficiently perform forest fire extinguishing missions using Air Force transport aircraft. Method: Based on literature research on forest fire extinguishing, forest fire extinguishing experiments using fixed-wing aircraft, and the operation status and operation method of forest fire extinguishing helicopters, the pros and cons of helicopter operation and the effects of large forest fire extinguishing using a large transport aircraft (C-130) Analyze the effectiveness of operation through analysis. Results: When extinguishing a large forest fire, an effective CM (Consequence Management) application plan was derived, including effective operation, control, command system, dispatch request, and forest fire extinguishment when integrating helicopter and fixed-wing aircraft (C-130). Conclusion: The application of the concept of CM (Consequence Management) is partially applied to some areas of chemical, biological, and radiological (CBRNE) protection in Korea, but efficient operation, control, and command systems are established when integrated operation of helicopters and large aircraft (C-130) in forest fire extinguishment. the concept of CM (Consequence Management), which is operated in advanced countries, was applied for safety management, dispatch requests, and forest fire extinguishing, thereby contributing to the establishment of a more advanced disaster and post-disaster management system.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.393-403
• /
• 2022

Various studies suggest that the initial operating form of UAM, which is being presented as a solution to the urban traffic problem, will be similar to VTOL aircraft among current aircraft. In a form similar to determining the direction of the runway where fixed-wing aircraft take off and land, the vertiport where take-off and landing of VTOL aircraft takes place determines the flight direction of departure and arrival in consideration of the direction of the wind. Unlike areas where airports are generally built, in the case of downtown areas, it is expected that the characteristics of wind may continuously change depending on the environment of changing terrain or obstacles such as the construction of new buildings. In this study, long-term actual observation data for reviewing the take-off and landing directions at the city center where the location of the vertiport is expected are compared using a wind speed map, and the characteristics of the ground wind and the possibility of change in the direction of the predominant wind depending on the observation period and observation location confirmed.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.4
• /
• pp.62-70
• /
• 2013

As the aviation industry looks to the future, fuel saving and $CO_2$ emission reduction play a dominant role in meeting the business challenges presented by global financial uncertainty. The IATA and International Government effort to save fuels, and then save 4 billion gallons of fuel burned, while reducing $CO_2$ emissions by 34 million tons. The various reduction methods adapted airlines and airports. We focused on optimized flight operation procedures for saving fuel and reduction emission cases. IATA and Canada government research reports focused on four methods that Engine Core Washing, Portable Water Management, Single Engine Taxi, APU limit operation. Apply to domestic airlines fuel data, Engine Core washing was saving more than Twenty-four thousand tons $CO_2$ emissions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.5
• /
• pp.344-357
• /
• 2019

Operational failures may occur even though there had been no signs of defect during the manufacturing process, which may be caused due to exposure to environmental stress which had not been addressed properly during the design process. It is thus necessary to perform environmental testing to determine the cause of the failures. Environmental testing is also used to determine whether a materiel has enough tolerance to the environmental stress during its operation. In this study, the method and level for each environmental testing are properly tailored and applied to a fight aircraft intended to operate in ROK (Republic of Korea), based on the MIL-STD-810G Change 1. Since each part of a fighter aircraft may be exposed to each different environment, LRUs (Line Replaceable Units) exposed to similar environment should be tested similarly. In addition, the decision whether to apply specific test and the tailoring technique in test level were derived for natural and induced environments, respectively. As a fight aircraft is assumed to operate in ROK, the tailoring of test methods and test level to fit to the environment in Korean peninsula is necessary. Further research is needed in determining a specific procedure and a specific level in a test method, and also in determining the test sequence, when conducting more than one is needed, because it can alter test results and it hence becomes an essential element in test design.

• Journal of Environmental Impact Assessment
• /
• v.18 no.1
• /
• pp.21-30
• /
• 2009

The study show that things about the noise control are indicated at The Noise & Vibration Control Act and the other Act. Also, the details program and total government ministries' program for the noise control are indicated what are the advance noise control plan. The study consist of the four part which are "Draw up the environmental noise infrastructure plan; the install shall be done the noisemap & the automatic noise measurement devices", "Resetting of environmental noise standard at the application area and Introduce of indoor noise; the guide for region classification of the noise standard & indoor noise", "Setting of aircraft noise standard and Program of measurement point operation; the noise-assessment-standard shall change from WECPN to new index($L_{den}$, $L_{dn}$, $L_{Aeq\;24h}$) & the operation and control of aircraft noise measurement changes from local environmental office to central control center" and "The method of noise regulation at construction site and the plan on making of standard for vibration regulation; It shall be made that the guideline of construction noise should include a target-construction, noise standard etc & the ministries shall unify control about construction vibration of the blasting vibration". The advance noise-policy will improve efficiency to deal with civil appeal & damage on residents about noise.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.2
• /
• pp.147-154
• /
• 2021

In this paper, the configuration and design of the test equipment are presented to examine the impact of rapid temperature change in cooling-air that may occur during the operation of the fixed wing aircraft Environmental Control System (ECS) on avionic electronic equipment. At the start of the ECS, the temperature of the air supplied by the aircraft ECS may be increased to 5.0℃ per second. In order to ensure operating of the avionic electronic equipment that is mounted on the aircraft and receives cooling-air from the ECS, testing equipment that can implement the cooling-air characteristic test environment is required. During design of test equipment was verified cooling-air rapid rate of temperature change by performing a thermal/flow analysis, performance of the test equipment implemented was verified by applying an avionic electronic equipment.

• Journal of Aerospace System Engineering
• /
• v.9 no.3
• /
• pp.17-22
• /
• 2015

The UAV industry grows rapidly and the civil UAV market which preparing the commercial services is expected to accelerate the growth. The new opportunities from the technological progress and deregulation show two kinds of organizational structure in the UAV industry. The companies from the traditional aircraft industry and the other sectors like IT industry have different organizational structures of the value chains, supply chains and the regulatory policies which related with them. And from the isomorphism theory it is predicted that those structures will change and converge to certain similar homogeneous features as the UAV industry matures. The matured form will be resulted by the new regulatory policies about the airspace, certifications and the operation rules about the UAV and the future market size and growth speed are also affected by them.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.1
• /
• pp.53-61
• /
• 2021

This paper is a preliminary study for the development of a drone for inspection inside a boiler in a thermal power plant, which is a high-temperature environment, and validated whether the drone can fly normally through a high-temperature environment simulation using AirSim. In a high-temperature flight environment, the aerodynamic characteristics of the air density and viscosity are different from room temperature, and the flight performance of the drone is also changed accordingly. Therefore, in order to confirm the change of the aerodynamic characteristics of the propeller according to the temperature change, the propeller analysis and thrust test through JBLADE, and the operation characteristics prediction through the electric propulsion system performance prediction model were performed. In addition, the analysis and performance prediction results were applied to AirSim for simulation, and the aircraft redesigned through the analysis of the results. As a result of the redesign, it was confirmed that about 65% of the maximum power used before the redesign was reduced to 52% to obtain the necessary thrust when hovering in an environment of 80℃.