• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.3
• /
• pp.21-26
• /
• 2013

In this study, it is to contribute to Korean aviation safe system as well as the improvement of the domestic(Korean) aviation mechanic qualification examination system by comparing and contrasting with the advanced aviation mechanic qualification examination system of ICAO, FAA and EASA. In addition, by reforming and improving Korean aviation mechanic qualification examination system, it can be achieved to keep the international competitiveness and can be authenticated even in international standardized countries in aviation mechanic qualification examination system.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.3
• /
• pp.12-17
• /
• 2020

Avionics is a compound word of aviation and electronics that began to be used in the late 1930s. In the components or sub-systems installed to the aircraft, avionics is something that works by electronic technology. In the past, the aircraft mate, the flight engineer, and the radar operators performed the work on board the aircraft but the modern aircraft have replaced these tasks with avionics. the aircraft mechanics who maintain and manage such complex aircraft must have expertise and technics with the development of avionics to maintain aircraft airworthiness. This paper is about the introduction of domestic avionics qualification system and the development of avionics maintenance technology. For this, the SWOT analysis is performed by identifying the internal and external environment. And recommend the strategy and direction of domestic avionics qualification and education system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.9_10 s.157
• /
• pp.1344-1353
• /
• 2006

The purpose of this research is to investigate the actual wearing conditions of working uniform and identify problems for the aircraft mechanic. For this study, questionnaire surveys were conducted dividing according to styles of clothing; one-piece and two-piece styles. Subjects were 343 men working in flight line. Questionnaire of 159 two-piece styles and 184 one-piece ones were used in analysis. The results of the study are as follows; The result about wearing each type of working uniform showed that the two-piece one is always as the air force uniform, whereas the one-piece one is worn only a few times. They felt inconvenience during all operations except in the sitting position, crawling position, and positions in which they were using tools. Accordingly, the result of the functionality reported dissatisfaction on all question items. Therefore, uniform of two-piece style achieved better results on all questions related to motional flexibility and functionality. Questions on changes to finishing methods showed that each airline employed different methods for both two-pieced and one-pieced uniforms. The answers about the unstitched or worn-out parts of the two-piece garments showed that pants were unstitched on the inner seam of the trouser leg and hip regions, but the upper one was not. In case of the one-pieced uniform, the parts of wearing out is the seam of hip and the unstitched parts are knee region and hem line of pants. Questions concerning their satisfaction with the material of uniforms indicated a high rate of dissatisfaction, particularly in its ventilation and absorbency. Questions concerning the preferred design of working uniform indicated a preference for two-piece uniform rather than one-piece ones.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.162-177
• /
• 2016

The government conducted an aviation expert training project in 2013. But unfortunately, only pilots and international experts were targeted and aircraft maintenance engineers that are the most important to safety were not trainee to the training courses. More importantly, the more the absolute number of aircrafts increases, the more demand for aircraft maintenance engineers are going up as well. Through the evaluation indicators for the Government-Sponsored Program Fostering Aviation Personnel(aircraft maintenance engineers). it figured out factors associated with the Government-Sponsored Program Fostering Aircraft Maintenance Engineers and it suggested a baseline data necessary to inspect and manage professional training institutions. Thanks to the development of the evaluation indicators, it is highly expected that difference among institutions will be narrowed, elevated level of management of the institutions will help foster and yield satisfactory aircraft maintenance engineers.

• Fashion & Textile Research Journal
• /
• v.13 no.5
• /
• pp.759-768
• /
• 2011

This study is designed to understand current wearing conditions of air force mechanic parkas and evaluate their functionality by examining the wearing conditions and wearers' subjective assessment. By doing so, it also intends to identify issues that require improvements; and to provide basic data for future development of air force mechanic parkas. A survey was conducted as a study methodology, and the collected 1,628 questionnaires were analyzed. Findings of this study are as follows. 1. In the usability assessment, it was found that visibility of body sides was needed to be enhanced since reflective tapes were attached only to the front and back of the body; pockets were too big, but not convenient to keep mechanic tools; the design of hiding hood was not suitable for water-proof clothing; and a new design of size-controllable hood was called for since the hood blocked eye sight. With respect to the fabric, dissatisfaction was identified with durability, cold-proof and fire-proof features. 2. In the mobility assessment, respondents showed low satisfaction with collar heights and neck girths. Mobility score was over moderate level on average, except the parka length that obstructs wearers' movement, and neck and collar size. 3. In the wearability assessment, respondents presented moderate satisfaction with pleasantness, weight, pressure and dampness. However, insulation was found unsatisfactory. Based on the result, this study proposed improvement plans on design, pattern and fabric; and is expected to serve as basic data for developing more effective and functional air force mechanic parkas.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.3
• /
• pp.509-520
• /
• 2023

In this paper, the structure and the characteristics of the Fly-By-Wire system applied to the civil aircraft was described. The development trend of the redundant method of the flight control system, data communication system, control surface actuation system and the control laws implemented by the Fly-By-Wire system of the civil aircraft are discussed. The Fly-By-Wire system was first applied to the fighter and its inherent advantages lead to the advent of the Fly-By-Wire civil aircraft. Recently even the small jet aircraft shows the trend of adopting the Fly-By-Wire system. In the future, most of the aircraft are expected to be the Fly-By-Wire type.

• Advances in aircraft and spacecraft science
• /
• v.10 no.5
• /
• pp.439-455
• /
• 2023

Free surface fluid oscillation in prolate spheroidal tanks has been investigated analytically in this study. This paper aims is to investigate the sloshing frequencies in spheroidal prolate tanks and compare them with conventional cylindrical and spherical containers to select the best tank geometry for use in space launch vehicles in which the volume of fuel is very high. Based on this, the analytical method (Fourier series expansion) and potential fluid theory in the spheroidal coordinate system are used to extract and analyze the governing differential equations of motion. Then, according to different aspect ratios and other parameters such as filling levels, the fluid sloshing frequencies in the spheroidal prolate tank are determined and evaluated based on various parameters. The natural frequencies obtained for a particular tank are compared with other literature and show a good agreement with these results. In addition, spheroidal prolate tank frequencies have been compared with sloshing frequencies in cylindrical and spherical containers in different modes. Results show that when the prolate spheroidal tank is nearly full and in the worst case when the tank is half full and the free fluid surface is the highest, the prolate spheroidal natural frequencies are higher than of spherical and cylindrical tanks. Therefore, the use of spheroidal tanks in heavy space launch vehicles, in addition to the optimal use of placement space, significantly reduces the destructive effects of sloshing.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.294-303
• /
• 2012

This study was designed to develop air force mechanic parka, evaluate it, and ultimately provide functionally superior parka to the air force. The development process was 1) conducting a survey, 2) identifying problems and shortcomings of currently-supplied parkas, and 3) improving the design, pattern and materials. The newly-developed parkas were evaluated in terms of their ease of fit, clothing mobility, and insulation. Ease of fit was evaluated by subjects' sensory tests, and clothing mobility was by fitness-for-motion tests and range-of-motion tests using a Goniometer. Evaluation on insulation was conducted by thermal manikins. Findings of this study were as follows: 1. In the subjective evaluation on clothing mobility, new parkas were considered to have sufficient ease of fit while previous ones scored much lower, confirming the improvement of the new version. 2. Both subjective tests and ROM measurements on fitness for motion verified the superiority of the new parkas. 3. Insulation tests found that although insulation capability of newly-developed parkas was at a similar level to those of the previous ones, their insulation capability per unit weight was superior, demonstrating that new parkas were better at blocking heat conduction. When making changes in parka patterns and designs to enhance the mobility, it was necessary to maintain the insulation function. The new parkas developed by this study was verified to be superior to the previous ones in their insulation and clothing mobility.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.5
• /
• pp.681-691
• /
• 2008

Taking into consideration both the inconveniences reported with current working uniform for the aircraft mechanics and the subjects' requirements mentioned in preceded survey, the researchers designed an ergonomic sample garments with improved motional flexibility and comfort. To improve motional flexibility, extra folds were added to the back of the garments to allow for ease of motion of limbs, so that the material would not be drawn up by the motion of the arms. Darts were added to the elbow, hip, the knee. Furthermore, by increasing the length of the waist centerline, the hip region would not be drawn up. For improved comfort, $CoolMax^{(R)}$ was used as lining material for the armpit and back region to discharge swear promptly. Subjects and panels were asked to evaluate the sample garment that followed an ergonomic design and pattern. According to the results, the sample garment was evaluated more highly than the existing working uniform in appearance and motional flexibility. The field tests by three aircraft mechanics working in the Office of Forestry were also demonstrated that the sample garment was advanced in terms of motional flexibility and comfort.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.1
• /
• pp.175-204
• /
• 2018

Recently, the aviation leisure business has been legislated, and related industries have become active base with increasing the light sports aircraft within the legislation system. However, in the light sports aircraft safety problem, it is often mentioned that the flight is in violation of the regulations, the lack of safety consciousness of the operator and lack of ability, and the personal operators have a risk of accident of light aircraft such as insufficient safety management and poor maintenance. At present, the maintenance of light sports aircraft is carried out by the A & P mechanic in accordance with the relevant laws and regulations, but it is difficult to say that it is equipped with qualification and expertise. It is not a legal issue to undertake light sports aircraft maintenance work on the regulation system. However, the problem of reliability and appropriateness is constantly being raised because airplanes, light sports aircraft, and ultra-light vehicle are classified and serviced in a legal method. Although legal and institutional frameworks for light sports aircraft are separated, much of it is stipulated in the aviation law provisions. Light sports aircraft maintenance work also follows the current aircraft maintenance system. In the United States, Europe, and Australia where General Aviation developed, legal and institutional devices related to maintenance of light aircraft were introduced, and specialized maintenance tasks are covered in the light aircraft mechanics system. As a result of analysis of domestic and foreign laws and regulations, it is necessary to introduce the qualification system for maintenance of light aircraft. In advanced aviation countries such as the United States, Europe, and Australia, a light sports aircraft repairman system is installed to perform safety management. This is to cope with changes in the operating environment of the new light sports aircraft. This study does not suggest the need for a light aircraft repairman system. From the viewpoint of the legal system, the examination of the relevant laws and regulations revealed that the supplementary part of the system is necessary. It is also require that the necessity of introduction is raised in comparison with overseas cases. Based on these results, it is necessary to introduce the system into the light aircraft repairman system, and suggestions for how to improve it are suggested.