• 한국통신학회논문지
• /
• 제17권4호
• /
• pp.361-370
• /
• 1992

수직 이착륙기와 같은 비행체의 정지비행 도중 비행체의 위치각, 각속도, 각가속도와 같은 상태량을 궤환 시킨 SRFIMF(State Rate Feedback Implicit Model-Following)이론을 이용하여 4개의 팬을 갖는 부상제어시스템을 구성하였다. 이 부상제어시스템의 yaw제어를 행하여, 각 상태궤환이득 및 전향경로 이득을 변화시켜 부상제어시스템의 특정을 해석하였으며, 부상시스템과 같은 제어계에 SRFIMF방식을 적용시켜 그 타당성을 조사하였다.

• 항공우주시스템공학회지
• /
• 제15권4호
• /
• pp.11-20
• /
• 2021

The estimation of hovering flight time of multicopters using the battery power propulsion system is important for the development and design of the aircraft and its operation. For a given operational weight, the maximum possible battery weight can be decided using both a conventional energy density method and a new Peukert law. In the present study, the hovering flight time is predicted using both methods. The specific data of multicopters in the published literatures were employed for the computation of the hovering flight time. The results were validated with the measured data. The effect of figure of merit of propeller, battery discharging process on the hovering flight time was evaluated, Finally, the effect of the battery cell and package connection types on the hovering time was investigated. It was found that the combination of serial battery cell connections and parallel package connection is the bast in the endurance maximization aspect. As the cell number increases in a package, the hovering flight time is increased. There exists the max. battery ratio for the given takeoff gross weight.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1399-1411
• /
• 1994

A model helicopter has more versatile flight capability than the fixed-wing aircraft and it can be used as an unmaned vehicle in hazardous area. A helicopter, similar to other aircrafts, is an unstable, multi-input multi-output nonlinear system exposed to strong disturbance. So it should be controlled by robust control theories that can be applied to multivariable systems. In this study, motion equations of hovering are established, linearized and transformed into a state equation form. Various parameters are measured and calculated in other to obtain the stability derivatives in the state equation. Hovering flight controller is designed using the digital LQG/LTR(Linear Quadratic Gaussian/Loop Transfer Recovery) control theory. The designed controller is tested by the nonlinear simulations and implemented on an IBM-PC/386. Experiments were carried out on a model helicopter attached to the 3-DOF gimbal. The designed controller showed satisfactory hovering capability to maintain the hovering for more than 40 seconds.

• 한국전자통신학회논문지
• /
• 제9권9호
• /
• pp.1019-1025
• /
• 2014

최근 무인항공기(UAV : Unmanned Aerial Vehicle)에 대한 연구가 다양한 각도로 진행되어 군사용 비행체에 관한 연구에서 부터 민간용 비행체 및 일반 취미 활동용 비행체에 이르기까지 다양하게 연구가 진행되고 있다. 특히, 무인 소형 비행체에 대한 연구는 수직이착륙(VTOL : Vertical Take-Off and Landing)과 용이한 방향전환 및 정지비행(hovering)에 대하여 연구되고 있으며, 이러한 연구부분에 적합한 무인 소형 비행체가 쿼드로터(quardrotor)형 무인비행체를 중심으로 연구되고 있다. 이러한 무인 비행체에 대한 연구는 공기역학적 힘에 의해 부양되므로 복잡한 동역학 분석과정을 필요로 하고 있으며, 이러한 역학적 분석 및 실험적 모델을 바탕으로 제어기를 설계하고 있다. 본 논문에서는 일반적인 PID 제어기를 바탕으로 기본적인 자세제어를 구현한 후, 제어기 설계에 고려하지 못한 비선형적인 요소를 신경회로망(neural networks)의 강화학습(reinforcement learning) 알고리즘을 이용하여 일반적인 제어기 설계에 고려하지 못한 비선형적인 요소를 보완하여 보다 안정적인 쿼드로터의 자세제어 방안을 제시하고자 한다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.427-430
• /
• 2006

The ground effect on tilt-rotor UAV is analyzed by simulating the hovering UAV for various altitudes. Ground effect increases pressure beneath the UAV body and generates additional lifting force. The ground effect diminishes at altitude 3m and hovering UAV generates constant lifting force above 3m.

• 공학교육연구
• /
• 제17권5호
• /
• pp.17-22
• /
• 2014

Unmanned aerial vehicles (UAVs) that have been recently commercialized can largely be divided into fixed-wing aircraft and rotor aircraft by their styles and flight characteristics. Although the fixed-wing aircraft represents higher power efficiency, higher speed, longer flight distance and larger loading weight than the rotor aircraft, they have a disadvantage of requiring a space for take-off and landing. On the other hand, the rotor aircraft can implement vertical take-off and landing (VTOL) and represents various flight modes (hovering, steep bank turns and low-speed flights). But they require both precision take-off control and attitude control. In this study, we used a quad-tilt rotor UAV to combine advantages in both the fixed-wing aircraft and the rotor aircraft. The quad-tilt rotor (QTR) system was designed and constructed by adding a tilt device with a servo motor to a general quad-rotor vehicle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.996-1000
• /
• 2003

In this paper, Fly robot with electric power, a kind of Unmanned aerial vehicle (UAV), is considered as an autonomous hovering platform, capable of vertical lift-off, landing and stationary hovering. This aircraft has four rotor and DC motors of electrical Power, which is capable of omni-direction for indoor application. In the earlier days of vertical flight experimentation developers looked at the intuitively easy control functionality of 4 rotor designs. But we need to obtain design method of suitable structures and adequate components because the existing prototypes of 4 rotor-craft don't analyze the propeller, motor characteristic and propose a methodology to optimize this system. In this paper, we will show the new 4 rotor craft with blimp, analyze design and manufacturing method of 4 rotor craft system. Also we prove propriety of our design and manufacturing method by being based on thrust and motor experiment.

• 제어로봇시스템학회논문지
• /
• 제14권12호
• /
• pp.1260-1265
• /
• 2008

This study deals with modeling and flight control of quadrotor type (QRT) unmanned aerial vehicles (UAVs). Rigorous dynamic model of a QRT UAV is obtained both in reference and body frame coordinate systems. A disturbance observer (DOB) based controller using the derived dynamic models is also proposed for robust hovering control. The control input induced by DOB is helpful to use simple equations of motion satisfying accurate derived dynamics. The experimental results show the performance of the proposed control algorithm.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.166-170
• /
• 2008

The changing process from hovering mode to transition one is of importance to determine a stability of tilt-rotor aircraft, which is utilized in UAV(Unmaned Aerial Vehicle). The analysis on fluid flows and aerodynamic characteristics according to variation of tilting angle of rotor is essential step in development of tilt-rotor. In the present study, the computation domain is divided into the rotating and stationary regions in order to consider the rotating blades. For the convenient realization of various tilting angle as well as application of boundary condition, the whole computation region is constructed into sphere domain. The near farfield boundary condition is adopted. The airfoil used in computation is NACA 0012. The computation results for the hovering mode are validated by comparing with previously conducted experimental results. From the results, the flow fields around rotor blade and the aerodynamic characteristics in transition mode are observed. The computational result will provide the basis for development and performance evaluation of tilt-type aircraft.

• 한국가시화정보학회지
• /
• 제9권2호
• /
• pp.40-47
• /
• 2011

Tilt-rotor aircraft can be used in various fields because they have the capabilities of the vertical take-off and landing and the high-speed cruise flight. In the present study, the flow analysis of a tilt-rotor aircraft is conducted at various tilt angles. The lift and drag forces of the tilt-rotor aircraft are obtained and the wakes by the rotor-blade are visualized. The result shows that the rotor-blade affects the lift force in a hovering mode and the main wing has an influence on the lift force in a cruise mode. Additional thrust is required at the tilt angle of around 40 degree due to the least lift force. The drag force is dependent on the rotor-blade at overall tilt angles. The minus drag force appears between the tilt angles of 90 degree and 55 degree. Also, the drag force is dramatically increased at the other tilt angles. The wake by rotor-blade affects the flow around the fuselage of the tilt-rotor aircraft at the tilt angles of 75 degree and 60 degree.