• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.32-39
• /
• 2019

Sensor pods mounted on the exterior of the aircraft used for tactical missions should have a fatigue life based on the expected load spectrum during operation. For mission equipment such as the sensor pod, the frequency fatigue life prediction method which applies the dynamic vibration environment condition is preferred due to the efficiency of the analysis. In this paper, a fatigue life prediction method in the frequency domain where stress due to static and dynamic loads is synthesized based on the actual flight load spectrum is proposed. After comparison with the existing analysis method, the fatigue life of the proposed analysis method was predicted conservatively. The proposed sensor pods satisfy the requirements of the fatigue life.

• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.144-148
• /
• 2023

Aircraft battery is the core equipment of an aircraft that supplies engine starting power and emergency power, and it must be charged to ensure sufficient capacity at all times and maintain high reliability to ensure stable power supply. The battery of the T-50 series aircraft is designed to enable the engine to start up to two times in temperatures as low as -18℃ and above. However, intermittent failures in engine starting have been observed during winter. In this paper, we analyze the failure phenomena occurring during low-temperature charging of the battery and improve the charging algorithm based on the analysis and test. Additionally, the results of start simulation tests show that the battery charging defects at low temperatures are resolved, and an improvement in the charging performance is confirmed; thus, validating the effectiveness of the new algorithm.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.2
• /
• pp.9-21
• /
• 1992

Sheet metal forming with hydraulic counter-pressure has several advantages compared with conventional drawing, such as higher forming limits, higher accuracy of formed parts and the achievement of complicated formed shapes. About 50 special press machines have already been used in Japan for manufacturing lighting reflectors, aircraft parts and automobile parts. This report descirbes the techniques and the equipment used in the application of process.

• 연구논문집
• /
• s.25
• /
• pp.207-213
• /
• 1995

Board bridges are one of the most important structural components of the airport ground equipment. Passenger boarding bridges will be installed to provide enclosed passengers for persons moving between aircraft loading doors and second story terminal gates. In order to the understand of boarding bridge, type and structural components are investigated and analyzed by using the commercial finite element code for model of various loading conditions. As results, the deformed shape and stress distribution of WS-750T and Jetway system type are obtained. It is expected to establish basic technology to design and change the shape of boarding bridge to improve the function.

• 한국항공운항학회:학술대회논문집
• /
• 2015.11a
• /
• pp.191-197
• /
• 2015

본 논문에서는 공항 지상 감시 장비(ASDE: Airport Surface Detection Equipment) 데이터를 이용하여 항공기의 지상이동 운항모드를 추정하는 방법을 제안하였다. 제안된 방법에서는 항공기의 운항모드와 그에 따라 관측되는 속도 및 가속도를 확률 변수로 정의함으로써, 확률적 추정방법을 통해 운항모드를 추정하였다. 운항모드를 추정하기 위한 모형으로서는 은닉 마르코프 모형(HMM: Hidden Markov Model)을 사용하였으며 실제 ASDE 데이터를 통해 제안된 방법의 성능을 검증해 보았다.

• Ceramist
• /
• v.9 no.6
• /
• pp.24-29
• /
• 2006

Electron beam physical vapor deposition (EB-PVD) process has currently been applied to thermal barrier coatings (TBCs) for aircraft engines. Due to unique columnar structure, EB-PVD TBCs have advantages in resistances to thermal shock and thermal cycle for their applications, compared to films prepared by plasma spray By the EB-PVD equipment, we successfully obtained yttria-stabilized zirconia (YSZ) layer which has columnar and feather like structure including a large amount of nano size pores and gaps. The EB-PVD technique has been developed for coating functional perovskite type oxides such as (La, Sr)MnO3. Electrode properties have been improved by interface and structural control.

• Journal of Aerospace System Engineering
• /
• v.15 no.6
• /
• pp.66-71
• /
• 2021

With the exception of some large domestic airlines with adequate maintenance capability, most low-cost and small airlines do not have the facilities, equipment/tools, or manpower to perform periodic inspections over "C check." They are repaired according to maintenance programs specified by manufacturers. The outsourcing (domestic or overseas) of maintenance contracts is thus crucial to achieve good quality service at low cost, and these contracts therefore need to be signed with a full understanding of what is to be expected. This study aims to determine the requirements to be considered prior to finalizing such contracts.

• International journal of advanced smart convergence
• /
• v.6 no.2
• /
• pp.16-23
• /
• 2017

In contemporary modern society, people are constantly exposed to many kinds of noise, such as that from machinery, aircraft, construction sites, or road traffic. Noise is considered one of the most indispensable and influential parts of human life. This study investigates the acoustic characteristics of noise transfer from external sources to the human ear. For this study, we measured and analyzed various types of noise environments, installed monitoring speakers in a semi-anechoic room, and conducted intentional noise-filled experiments. In this environment, the size of the sounds generated by use of a portable device was also measured and the SNR (signal to noise ratio) calculated to study the influence of the noise. As sound is transmitted to the ear and the human body, it affects not only auditory damage but also other parts of the body. In this paper, we propose a proper SNR for noise emitted by portable IT equipment to prevent hearing loss when IT equipment is used.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.323-327
• /
• 2001

Electrorheological(ER) and magnetorheological(MR) fluids have a unique ability to increase the dynamic yield stress of the fluid substantially when electric or magnetic field is applied. Controllable fluids such as ER and MR fluids have received considerable attention as several components of engineering devices. One of them is a smart impact damper using ER/MR fluids. Impact damper system can be used in the joint mechanism of railroad vehicle, protection equipment of elevator's drop, and launch equipment of aircraft. This paper presents the results of an analytical study of the performance of a smart impact damper to suppress vibration during impact excitation. The damping capabilities of MR impact damper for variable applied current are analyzed using Bingham model under sudden impact load.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.484-486
• /
• 2018

MF-CW(Multi-Frequency Continuous Wave)operated on Electro-Optical Tracking System to measure slant range of space launch vehicle and aircraft at Naro Space Center. In this paper, we compared and analyzed the difference exactly measured slant range using the laser lightwave range measuring equipment with measured on the transponder and described the accuracy of slant range.