• Asian Journal of Atmospheric Environment
• /
• 제12권1호
• /
• pp.78-86
• /
• 2018

Filter-based sampling techniques are the conventional way to collect particulate matter, but particles collected and entangled in the filter fibers are difficult to be removed and thus not suited for the following cell- and animal-based exposure experiments. Collecting aerosol particles in powder form using a cyclone instead of a filter would be a possible way to solve this problem. We developed a hybrid virtual-impactor/cyclone high-volume fine and coarse particle sampler and assessed its performance. The developed system achieved 50% collection efficiency with components having the following aerodynamic cut-off diameters: virtual impactor, $2.4{\mu}m$; fine-particle cyclone, $0.18-0.30{\mu}m$; and coarse-particle cyclone, $0.7{\mu}m$. The virtual impactor used in our set-up had good $PM_{2.5}$ separation performance, comparable to that reported for a conventional real impactor. The newly developed sampler can collect fine and coarse particles simultaneously, in combination with exposure testing with collected fine- and coarse-particulate matter samples, should help researchers to elucidate the mechanism by which airborne particles result in adverse health effect in detail.

• 한국환경보건학회지
• /
• 제31권4호
• /
• pp.301-308
• /
• 2005

The purpose of this study was to characterize mass concentration of $PM_{10}\;to,\;PM_{2.5}$ and metallic composition using Minivol Portable Sampler from May 2003 to May 2004 in metropolitan city, Seoul. Annual average concentration of $PM_{10}$ were $57.67({\pm}28.20)\;{\mu}g/m^3\;and\;PM_{2.5},\;were\;42.06({\pm}20.23)\;{\mu}g/m^3$. The concentration was the highest in winter because persistent thermal inversion and in spring, particulate matter concentration was high because of yellow-sand events. The average $PM_{2.5}/PM_{10}$ ratio was 0.73. This indicated $PM_{2.5}$ fraction played a significant role in air pollution. The atmospheric metallic elements in the $PM_{10},PM_{2.5}$ came different emission sources such as soil, traffic, industry and resuspended particles. The results showed that average $PM_{10}$ composition order as Fe>Zn>Pb>Cu>Mn. The metallic elements Zn and Fe were the largest composition in the $PM_{2.5}$

• 대기
• /
• 제28권4호
• /
• pp.469-477
• /
• 2018

We performed the comparison of observed $PM_{10}$ and $PM_{2.5}$ at both the Yonsei University and the AIRKOREA site in the same Seodaemun-gu district, Seoul from March to December 2016. Generally, the moderate correlations between two sites were found for both $PM_{10}$ and $PM_{2.5}$, but monthly difference was somewhat occurred, implying that the measurement situation is not equally maintained even in a closely located area. Particularly correlations became weaker in June and July, which seems the impact of rainy conditions. Correlations between two stations were higher for $PM_{10}$ compared to $PM_{2.5}$, probably indicating the spatially larger difference of fine mode particle. Monthly mean variation was similar between two sites showing a maximum in March and minimum in August. Diurnal variation was somewhat different: morning peak at Yonsei University but evening peak at the Seodaemun-gu AIRKOREA site, reflecting the difference of local air condition. We also compared the extent of $PM_{10}$ and $PM_{2.5}$ according to the local wind speed and direction. In general, the level of particulate matter was high when the wind is blowing from the northwestern area with low wind speed, meaning the high accumulation effect of transported air particles. Findings of this study can be usefully considered for the investigation about the discrepancy of aerosol measurement in a local scale.

• 한국환경보건학회지
• /
• 제44권6호
• /
• pp.524-538
• /
• 2018

Objective: This study aimed to identify the size distributions of particulate matter emitted during 3D printing according to operational conditions and estimate particle inhalation exposure doses at each respiratory region. Methods: Four types of printing filaments were selected: acrylonitrile-butadiene-styrene (ABS), polylactic acid (PLA), Laywood, and nylon. A fused deposition modeling (FDM) 3D printer was used for printing. Airborne particles between 10 nm and $10{\mu}m$ were measured before, during, and after printing using real-time monitors under extruder temperatures from 215 to $290^{\circ}C$. Inhalation exposures, including inhaled and deposited doses at the respiratory regions, were estimated using a mathematical model. Results: Nanoparticles dominated among the particles emitted during printing, and more particles were emitted with higher temperatures for all materials. Under all temperature conditions, the Laywood emitted the highest particle concentration, followed by ABS, PLA, and nylon. The particle concentration peaked for the initial 10 to 20 minutes after starting operations and gradually decreased with elapsed time. Nanoparticles accounted for a large proportion of the total inhaled particles in terms of number, and about a half of the inhaled nanoparticles were estimated to be deposited in the alveolar region. In the case of the mass of inhaled and deposited dose, particles between 0.1 and $1.0{\mu}m$ made up a large proportion. Conclusion: The number of consumers using 3D printers is expected to expand, but hazardous emissions such as thermal byproducts from 3D printing are still unclear. Further studies should be conducted and appropriate control strategies considered in order to minimize human exposure.

• 대한화장품학회지
• /
• 제44권3호
• /
• pp.249-258
• /
• 2018

대기 오염은 피부의 산화적 손상, 염증 및 노화를 일으킬 수 있다. 레스베라트롤은 폴리페놀 화합물의 일종으로 항산화, 항염증, 멜라닌 생성 억제 작용 등 다양한 생물학적 활성이 있는 한편 열과 빛에 약한 단점이 있다. 레스베라트릴 트라이아세테이트(RTA)는 레스베라트롤에 비해 안정하고, 피부 안전성과 미백 효능이 보고된 화장품 신소재이다. 본 연구의 목적은 직경 $10{\mu}m$ 미만 대기 미립자 물질(PM10)에 노출된 인간 표피각질형성세포(HEK)의 염증 반응에 대한 레스베라트롤과 RTA의 영향을 조사하기 위한 것이다. 배양된 HEK세포를 레스베라트롤과 RTA의 유무 조건에서 PM10에 노출시키고, 세포 생존율, 반응성 산소종(ROS)의 생성 및 염증성 사이토카인의 발현을 분석하였다. PM10을 처리하였을 때 세포 생존율이 감소하였고 종양괴사인자-${\alpha}$($TNF-{\alpha}$), 인터루킨-$1{\beta}$($IL-1{\beta}$), 인터루킨-6(IL-6) 및 인터루킨-8(IL-8)의 발현이 증가하였다. 레스베라트롤과 RTA는 PM10으로 유도된 세포의 사멸과 ROS 생성을 경감시켰다. PM10에 의해 증가되는 여러 염증성 사이토카인의 발현은 레스베라트롤과 RTA에 의해 경감되거나(IL-6), 증진되거나($IL-1{\beta}$), 변화하지 않았다($TNF-{\alpha}$ 및 IL-8). PM10에 의해 유도된 IL-6단백질의 발현이 레스베라트롤과 RTA에 의해 감소되었다. 본 연구의 결과는 레스베라트롤과 RTA가 대기 미립자 물질에 노출된 피부의 세포 손상과 염증 반응을 조절하는 작용이 있음을 시사한다.

• Tuberculosis and Respiratory Diseases
• /
• 제58권2호
• /
• pp.167-173
• /
• 2005

연구배경 : 황사는 우리나라에서 주로 3월에서 5월까지 봄에 집중적으로 발생하는 대기오염의 주된 원인으로 사람에게 만성 기관지염을 악화시키고 호흡기 질환을 유발하는 것으로 알려져 있다. 황사기간 중 부유분진 중의 무기이온 성분과 금속성분의 분석에 대한 연구와 천식 등 호흡기 질환과의 연관성에 대한 연구는 많으나, 아직까지 황사의 부유분진중의 미생물에 대한 연구는 부족하다. 이 연구에서는 황사 현상시 부유분진 중에 박테리아, 진균 그리고 바이러스 등의 미생물의 검출유무와 종류를 알아보고 금속 성분 및 농도에 대해 알아보고자 본 연구를 시행하였다. 방 법 : 시료의 채취는 충남 태안군 파도리에서 cascade impactor(AN-200, USA)를 설치하여 1시간 동안 얻었으며 채취는 황사현상 기간과 비황사기간중 각각 한번씩 시행하였다. Cascade impactor에 의해 채취된 부유분진중의 미생물 검사는 cascade impactor내에 있는 여과지를 그람 양성균, 그람 음성균, 진균, 그리고 바이러스의 배지(4종, influenza, parainfluenza, adenovirus, RSV)에 옮긴 후에 배양하여 분석하였다. 금속 성분의 분석은 XRF를 이용하여 분석하였다. 결 과 : 조사 대상 지역의 황사기간과 비황사 기간 중 부유분진의 농도는 각각 80.2, $40.3g/m^3$ 이었다. 부유분진 중 XRF로 분석한 금속성분은 알루미늄과 규소, 황, 칼륨과 칼슘, 철 등 대부분의 금속이 비 황사 기간에 비해 황사 기간에서 농도가 높았다. 미생물 검사 결과상 그람 양성균은 Bacillus species, Coagulase negative staphylococcus가 자랐으며 황사기간보다 비 황사 기간동안 채취한 시료에서 오히려 더 많은 단계의 여과지에서 균이 동정되었으나 두 기 간에서 자라는 균주의 종류에는 차이가 없었다. 진균 배양은 비 황사 기간동안 Mucor species, Cladosporum, Alternaria, Aspergillus, Penicillium, Alternaria등의 진균들이 자랐으며, 황사 기간동안은 Penicillium과 Alternaria, 그리고 다른 mold form fungus들이 자랐다. 바이러스와 그람 음성균은 두 기간 다 자라는 균주는 없었다. 결 론 : 이 연구는 황사 기간동안 대기분진 중에 포함된 미생물에 대한 최초의 연구로 황사 현상시 미생물의 검출 종류는 크게 차이가 없었으나 개체수의 증가가 관찰되었으며 금속 성분의 종류는 차이가 없었으나 농도는 황사 현상시에 더 높은 수치를 보여 황사현상에 따른 호흡기 질환자의 주의와 대기오염에 대한 대책이 필요할 것으로 사료된다.

• 한국지구과학회지
• /
• 제40권4호
• /
• pp.414-427
• /
• 2019

In East Asia, the long-range transport of dust storms originating from Mongolia and northern China affects airborne dust loadings over downwind areas in the southern Korean Peninsula. Since 1997, dust loading cases caused by dust storms have been observed using the thresholds of total suspended particles (TSP, ${\geq}250{\mu}g\;m^{-3}\;hr^{-1}$) and particulate matter less than $10{\mu}g$ ($PM_{10}$, ${\geq}190{\mu}g\;m^{-3}\;hr^{-1}$) in the central-southern Korean Peninsula. There were two dust loading cases that exceeded these thresholds in 2016 and three in 2017, which reflects the downward trend of the last twenty-one years in the central-southern Korean Peninsula. Furthermore, five other dust loading cases with mass concentrations lower than the thresholds were observed from 2016 to 2017. In the moderate dust loading cases exceeding the thresholds, a descending motion of cut-off lows below $45^{\circ}N$ and a southward trough at 500 hPa gpm isopleths intensified at the western ridge, and largely extended the surface high-pressure system over southeast China. Airborne dust loadings following pronounced north-westerlies in the forward side of the high-pressure system were transported to the surface of the central-southern Korean Peninsula. However, in slight dust loading cases lower than the thresholds, the restricted descending motion of cut-off lows over $45^{\circ}N$ and the southwestward trough at 500 hPa gpm isopleths intensified the zonal flow over the Korean Peninsula. Surface high- and low-pressure systems moved eastward from the source compared to moderate dust loading cases. Due to the zonal movement of dust storms traversing eastern China, slight dust loading cases were observed with relatively higher ratios of $PM_{2.5}/TSP$ and carbon monoxide (CO) in the central-southern Korean Peninsula.

• 한국환경보건학회지
• /
• 제26권2호
• /
• pp.34-40
• /
• 2000

The purpose of this study was to investigate the seasonal variation of PAHs and to estimate their source characteristics in Taegu area. To do this, four sampling sites were selected to represent an industrial, a traffic, a traffic & residential, and a residential area in Taegu. Total of 72 samples had been collected from January, 1999 to September, 1999 on glass micro fiber filters by high volume air sampler. The PAHs in the total suspended particulate were extracted by a soxhlet process with dichloromethane and analyzed by GC/MSD, GC/FID. A statistical analysis was performed for the PAHs data set using a principal component analysis to derive important factor inherent in the interactions among the variables. The specific conclusions of this research are: 1) There was a significant seasonal and local variation in the atmospheric concentration of PAHs. The seasonal variation is winter>spring>Fall>summer, and the local variation is industrial>traffic>graffic & residential>residential area. 2) To evaluate the correlation between a measured PAHs and other affecting factors such as air pollutant concentration and meterological data, statistical analysis was performed. PAHs and other affecting factors such as air pollutant concentration and meterological data, statistical analysis was performed. PAHs have negative correlation with temperature (r=-0.593, p<0.05), radiation(r=-0.535, p<0.05), and O3(r=-0.719, p<0.05), but have positive correlation with NO(r=0.615, p<0.05) 3)Finally, multivariate analysis was performed for the PAHs dat set to identify and to estimate the source contributions of PAHs. According to results of statistical analysis, it could be identifies as three factors such as vehicular/gasoline, vehicular/diesel, and combustion in Taegu area.

• 한국대기환경학회지
• /
• 제20권1호
• /
• pp.69-76
• /
• 2004

Asian Dust samples were collected in the ambient air of Seosan, Western Korea, in spring of 2000∼2002. PM (Particulate Matter) concentrations were 199,8$\mu\textrm{g}$/㎥ in the first Asian Dust period (March, 23∼24) and 249.4$\mu\textrm{g}$/㎥ in the second period (April, 7∼9) of 2000. Compared with the concentrations in 2000, relatively low PM concentrations, 157.3$\mu\textrm{g}$/㎥ were measured in the periods of 2001 (April, 24∼26). Especially high PM concentration 953.1$\mu\textrm{g}$/㎥ were measured in the periods of 2002 (March, 21∼22). The variation in the PM concentration was observed according to the time for the formation of Asian dust. Considering the particle size distributions of Asian dust, a high concentration was also observed in coarse particle region. The results of backward trajectory model showed the route of the dust storms from northern area of Mongol and Gobi desert. Various mycelia grown from fungal spores were observed on the PM samples and identified at the genus level. All the genera from the three years (2000∼2002), Fusarium, Aspergillus, Penicillium, Basipetospora, Epicoccum and Monotospora are hyphomycetes in the division Fungi imperfecti (Deuteromycota). Fungal composition on the dust sample in March, 2000 was similar to the result of March, 2002. However, the result of April, 2001 was obviously different from the other dust periods. The variations of fungal compositions between the dust periods could be caused by the trajectories of the dust storms.

• 한국대기환경학회지
• /
• 제26권5호
• /
• pp.499-506
• /
• 2010

Recently, a great deal of attention have been directed to the use of alternative fuels as a means to reduce vehicular emissions. As one of the promising alternative fuels, bio-diesel has advantages of a wide adaptability without retrofit of diesel engine. It is also effective enough to reduce CO, THC, $SO_x$, polycyclic aromatic hydrocarbons (PAHs) and PM. In this study, we investigated the emission characteristics of biofuels between different operating conditions, i.e., engine speed (1,400 rpm and 2,300 rpm), engine load (10% and 100%), bio-diesel blending (BD0, BD5 and BD20), and recirculation (EGR) rate of exhaust gas (0% and 20%). Relative performance of the system was evaluated mainly for the greenhouse gases ($CH_4$, $N_2O$ and $CO_2$). In addition, emission characteristics of ND-13 mode were also tested against both greenhouse gases and other airborne pollutants under emission regulation. The relative composition of bio-diesel has shown fairly clear effects on the emission quantities of CO, THC, and PM emission, although it was not on $NO_x$ and greenhouse gases. EGR rate has shown trade-off characteristics between $NO_x$ and PM.