• 한국컴퓨터정보학회논문지
• /
• 제29권7호
• /
• pp.149-158
• /
• 2024

본 연구는 다양한 실내 환경에서 공기질을 모니터링 할 수 있는 다중 센서 시스템인 AirDeep-Room을 설계 및 개발하였다. 이 시스템은 CO2, TVOC, 미세먼지, 온도, 습도 등을 실시간으로 측정하며, 멀티 센서를 통해 다양한 환경에서의 공기질 변화를 분석할 수 있는 장점을 제공한다. AirDeep-Room 시스템은 low data 형식으로 데이터를 실시간으로 확인할 수 있으며, 실내 환경에서의 공기질에 대한 분석을 진행하였다. 설계한 센서 시스템을 상이한 환경인 서버실과 강의실에 설치해 실험을 수행한 결과, 서버실에서의 온도와 습도는 -0.24의 음의 상관관계를, 강의실에서는 0.43의 양의 상관관계를 보였다. 강의실에서의 실험 결과는 학생 수와 CO2 및 TVOC 농도가 r=0.69로 높은 상관관계를 보였다. 이는 학생 수가 실내 공기질 변화에 중요한 영향을 미칠 수 있음을 보여준다. 이러한 결과는 AirDeep-Room 시스템이 다양한 환경에서 공기질을 보다 효과적으로 관리할 수 있는 기반을 제공하며, 인구 밀도가 높은 공간에서 공기질 개선을 위한 중요한 역할을 할 수 있을 것으로 기대된다.

• 한국전기전자재료학회논문지
• /
• 제18권8호
• /
• pp.734-739
• /
• 2005

Zinc oxide films were deposited on Si (111) substrates by radio-frequency (rf)sputtering at a room temperature and post annealed in Na, air, and $H_2O$ ambient at temperatures between $800{\circ}C$ for 2 hrs. The properties were investigated by atomic force microscope (AFM), X-ray diffraction (XRD), Auger electron spectroscopy (AES) and photoluminescence (PL). Our experiments demonstrated that ZnO films have the better crystal quality for post thermal annealing and especially in $H_2O$ ambient. Even though thermal annealing reduced deep level emission somewhat, for further getting rid off deep level emission, oxygen contents should be adjusted. In our results, $H_2O$ ambient gave the best structural and optical properties.

• Restorative Dentistry and Endodontics
• /
• 제4권1호
• /
• pp.35-38
• /
• 1978

The purpose of this study was to measure micro-knoop hardness and coefficient of thermal expansion on composite resins (Epolite, Adaptic, Hipol and Compo T.) Four different type of composite resins were measured at the varying depth of 30, 60, 90, 150, 200, 400, 700 and 1000 micron from the surface to deep portion. The specimens were stored both in the air room temperature for 2 days, 30 days and in water at $37^{\circ}C$ for 30 days. Thermal expansions of specimens(4mm in diameter and 50mm in height) were measured in quartz tube dilatometer from $20^{\circ}$ to $70^{\circ}C$ The following results were obtained. 1. The hardness of superficial portion were lower than inner portion of resin. 2. The value of hardness obtained from the specimen stored in room temperature in the water at $37^{\circ}C$ for 30 days were lower than above described Cases. 3. The coefficient of thermal expansion of Adaptic had $29.75{\times}10^{-6}/^{\circ}C$, Hipol had $30{\times}10^{-6}/^{\circ}C$, Epolite had $39.85{\times}10^{-6}/^{\circ}C$ and Compo T had $36.95{\times}10^{-6}/^{\circ}C$.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권5호
• /
• pp.742-747
• /
• 2019

Objective: A concentration of airborne bacteria generated from swine houses is recognized to be relatively higher than other work places and it is essential to optimally manage it to prevent farmers' respiratory diseases. This study was conducted to assess the distribution characteristics of airborne bacteria in swine houses located at South Korea. Methods: A total 27 pig buildings of the enclosed type operated with mechanical ventilation system by a side wall fan and deep-pit manure system with slats were surveyed. Air samples were collected at 1.0 m above the middle floor in pig housing room. A six-stage viable particulate cascade impactor was used to identify the distribution of the sizes of particles in diameter. Results: Seasonal mean levels of airborne bacteria in the housing rooms of gestation/farrowing pigs, nursery pigs and growing/fattening pigs were 3,428(${\pm}1,244$) colony forming unit $(cfu)/m^3$, $8,325({\pm}3,209)cfu/m$, and $13,254({\pm}6,108)cfu/m^3$ for spring; $9,824({\pm}2,157)cfu/m^3$, $18,254({\pm}5,166)cfu/m^3$, and $24,088({\pm}9,274)cfu/m^3$ for summer; $1,707({\pm}957)cfu/m^3$, $4,258({\pm}1,438)cfu/m^3$, and $8,254({\pm}2,416)cfu/m^3$ for autumn; and $2,322({\pm}1,352)cfu/m^3$, $6,124({\pm}1,527)cfu/m^3$ and $12,470({\pm}4,869)cfu/m^3$ for winter, respectively. Conclusion: Concentrations of airborne bacteria according to pig housing type were highest in growing/fattening housing room followed by nursery housing room and gestation/farrowing housing room. In terms of seasonal aspect, the pig building showed the highest levels of airborne bacteria in summer followed by spring, winter and autumn. The respirable airborne bacteria which are ranged between 0.6 and $4.7{\mu}m$ accounted for approximately 60% compared to total airborne bacteria regardless of pig housing type.

• 수산해양교육연구
• /
• 제12권1호
• /
• pp.22-82
• /
• 2000

The ship hull construction materials of fishing boat has changed in order that wooden, steel, and fiber glass reinforced plastic(FRP). The fishing boat made from FRP has increased every year because that materials has proved excellent of the characteries for fishing boats construction members. Recently, FRP tend towards evasion for the pollution of air enviroment. Therefore. the materials of fishing boat construction must be exchanged by another one. Aluminium alloys must be recommended for fishing boats construction mateials because that is light weight and corrosion resisting in the sea water. Regulation of the standard of ship hull construction for aluminium alloys fishing boats did not enact laws in the interior now. Therefore, this regulation was studied by the following items. that is Rudder, Bottom construction, Side hull plate construction, Deck plate construction, piller. Water tight bulkhead, Deep tank, Fish tank, Stern construction, Superstructure, Deck house construction, Hatch, Engine room opening, Hatch opening, Bulwark, Welding and Rivet etc. A study on the regulation will be contributed to enact laws for fishing boat construction of aluminium alloys.

• Asian Journal of Atmospheric Environment
• /
• 제11권1호
• /
• pp.37-53
• /
• 2017

The effectiveness of four air fresher (AF) systems was evaluated with respect to their removal efficiencies against offensive odorants. For this purpose, malodorous species were generated by exposing freshly cooked foods emitting odorants with levels moderately above their respective threshold values in a confined room. The deodorization efficiency of the four AF systems was then tested for a period of 30 min by estimating the extent of reduction in odorant levels after the operation of each AF. The removal efficiency of the four AF units against each odorant was evaluated as follows: (1) between AF products from different manufacturers, (2) between odorants and ultrafine particulate matter ($PM_{2.5}$), and (3) between operation and natural degassing. The average sorptive removal of odorants was generally <80% and considered less effective or non-effective relative to $PM_{2.5}$. Further examination of odor reduction, if evaluated in terms of odor indices like odor intensity (OI) and odor activity value (OAV), recorded a mean of 33% and 87%, respectively. The overall results of this study confirmed that all tested AF units were not effective to resolve odor problems created under our testing conditions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.327-327
• /
• 2009

ZnO with a large band gap (~3.37 eV) and exciton binding energy (~60 meV), is suitable for optoelectronic applications such as ultraviolet (UV) light emitting diodes (LEDs) and detectors. However, the ZnO-based p-n homojunction is not readily available because it is difficult to fabricate reproducible p-type ZnO with high hall concentration and mobility. In order to solve this problem, there have been numerous attempts to develop p-n heterojunction LEDs with ZnO as the n-type layer. The n-ZnO/p-GaN heterostructure is a good candidate for ZnO-based heterojunction LEDs because of their similar physical properties and the reproducible availability of p-type GaN. Especially, the reduced lattice mismatch (~1.8 %) and similar crystal structure result in the advantage of acquiring high performance LED devices. In particular, a number of ZnO films show UV band-edge emission with visible deep-level emission, which is originated from point defects such as oxygen vacancy, oxygen interstitial, zinc interstitial[1]. Thus, defect-related peak positions can be controlled by variation of growth or annealing conditions. In this work, the undoped ZnO film was grown on the p-GaN:Mg film using RF magnetron sputtering method. The undoped ZnO/p-GaN:Mg heterojunctions were annealed in a horizontal tube furnace. The annealing process was performed at $800^{\circ}C$ during 30 to 90 min in air ambient to observe the variation of the defect states in the ZnO film. Photoluminescence measurements were performed in order to confirm the deep-level position of the ZnO film. As a result, the deep-level emission showed orange-red color in the as-deposited film, while the defect-related peak positions of annealed films were shifted to greenish side as increasing annealing time. Furthermore, the electrical resistivity of the ZnO film was decreased after annealing process. The I-V characteristic of the LEDs showed nonlinear and rectifying behavior. The room-temperature electroluminescence (EL) was observed under forward bias. The EL showed a weak white and strong yellowish emission colors (~575 nm) in the undoped ZnO/p-GaN:Mg heterojunctions before and after annealing process, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권5호
• /
• pp.612-616
• /
• 2004

This study was carried out to compare the semen characteristics, frozen-thawed sperm viability and testosterone concentration and in vitro fertilization (IVF) and development of in vitro matured pig oocytes between two Yorkshire boars. Semen and blood samples were collected once per week from October to November 2002 from two adult Yorkshire boars at 18 months of age with 170 kg body weight. Sperm were deep frozen in 5 ml maxi-straws with lactose-egg yolk and N-acetyl-D-glucosamine (LEN) diluent and stored in liquid nitrogen. Blood samples were obtained at 10 a.m. by inserting a 21 gauge, hypodermic needle attached to 10 ml syringe into surface veins in the ear. The concentration of testosterone was determined by Competitive Enzyme Immunoassay. Ovaries were collected from prepubertal gilts at a local slaughter house. Cumulus oocyte complexes were aspirated from antral follicles (3 to 6 mm in diameter). The medium used for oocyte maturation was modified TCM 199. After about 22 h of culture, oocytes were cultured without cysteamine and hormones for 22 h at $38.5^{\circ}C$, 5% $CO_2$ in air. For IVF, one frozen 5 ml straw was thawed at $52^{\circ}C$in 40 sec and was diluted with 20 ml Beltsville thawing solution at room temperature. Sperm were washed 2 times in mTLP-PVA and inseminated without preincubation after thawing. Oocytes were inseminated with $2{\times}10^7$/ml sperm concentration. Oocytes were coincubated for 6 h in 500 ${\mu}$l mTBM fertilization medium. At 6 h after IVF, oocytes were transferred into 500 ${\mu}$l NCSU-23 culture medium for further culture of 48 and 144 h. There were no significant differences in the semen volume, motility, normal acrosome morphology and sperm concentration of raw semen between A and B of Yorkshire boar. However, motility and normal acrosome of boar A were higher than those of boar B at 0.5, 2, 3, 4, 5 and 6 h incubations of frozen-thawed sperm. Testosterone concentration (3.75 ng/ml) of boar A was higher than that (2.34 ng/ml) of boar B. The rate of blastocyst formation (15.1%) of boar A was higher than that (10.4%) of boar B. In conclusion, serum testosterone concentration of boar showed very important role for the frozen-thawed sperm viability and the blastocyst formation of pig oocytes matured in vitro.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제8권7호
• /
• pp.485-496
• /
• 2018

본 논문에서는 스크린도어가 설치되어 있는 지하역사 승강장에서 화재가 발생시 승강장 환기실에 설치된 송풍기의 작동에 따른 연기거동을 실험적인 방법으로 측정하였다. 스크린도어가 닫힌 승강장에서 모의화재 발생시 승강장의 제연설비가 작동하지 않은 경우와 작동하는 경우에 제연 특성을 비교하였다. 화재연기를 모사하기 위하여 연기발생기에서 발생한 연기를 열풍기를 이용하여 가열하였다. 화재연기를 정량적으로 측정하기 위하여 연기농도계를 이용한 광투과도를 측정하였다. 스크린도어가 닫혀져있고 지하역사의 제연설비가 작동되지 않는 경우 승강장에 화재가 발생하면 연기가 승강장 내부에 축적되어 승객의 피난이 매우 어려우며, 매우 위험한 상황으로 연결될 수 있음을 확인할 수 있었다. 반면에 역사의 제연설비를 가동한 조건에서는 승강장 화재에 의해 발생한 연기가 역사의 제연설비를 통하여 외부로 빠져나가며, 대합실에서 승강장 방향으로 기류가 형성되어 승강장 승객이 대합실 방향으로 대피하는 것이 가능함을 확인할 수 있었다. 후속 논문에서는 승강장 인접부에 위치한 터널환기구를 통한 터널 제연의 병행효과에 대하여 다룰 예정이다.

• 농업과학연구
• /
• 제41권4호
• /
• pp.321-326
• /
• 2014

본 연구는 당귀의 대량생산 시스템에 적합한 재배 방식을 선정하기 위하여 담액경, 배지경, 분무경 재배 시스템에 대한 비교 평가와 당귀의 엽단위 광합성 특성을 분석하여 대량생산 시스템에서의 최적환경 조건 구명을 위하여 수행되었다. 참당귀 '만추'를 파종하여 암상태에서 발아 시킨 후에 기온 $18-22^{\circ}C$, 상대습도 50-70%, PPFD $120{\pm}6{\mu}mol\;m^{-2}s^{-1}$ 조건으로 3주간 육묘하였다. 본엽 4매가 출현하는 시기에 담액경, 배지경, 분무경의 3개의 처리구에 각각 16주씩(총 48주) 이식하였으며 PPFD는 광원 20 cm 아래에서 $150{\pm}6{\mu}mol\;m^{-2}s^{-1}$, 온도 $20/23{\pm}1^{\circ}C$, 상대습도 50-70% 조건으로 11주간 재배하였다. 11주째에 생육조사를 실시하였으며, 당귀의 환경조건에 대한 광합성 특성을 살펴보고자, $CO_2$농도, 온도, PPFD 값에 따른 광합성특성을 휴대용 광합성 측정기를 이용하여 측정하였다. 배지경재배에서 당귀의 생체중과 건물중이 담액경 재배와 비교하여 유의적인 증가를 나타내었으며, 분무경 재배와는 유의적 차이가 발생되지 않았다. 광합성 특성으로 PPFD 값이 $50-200{\mu}mol\;m^{-2}s^{-1}$ 증가할 때 광합성 값이 급상승하는 경향을 나타내면서 $800-1600{\mu}mol\;m^{-2}s^{-1}$ 사이에서 광포화점이 있을 것으로 추정되었다. $CO_2$ 포화점은 $1000-1200{\mu}mol\;mol^{-1}$에 존재하는 것으로 관찰되었으며, 온도가 $16-26^{\circ}C$로 증가할 때, 실제 광합성 값은 거의 영향을 받지 않았다. 결과적으로 당귀를 수경재배 기술을 이용한 대량 생산 시스템에 도입할 경우 분무경 재배 시스템에 PPFD는 $150{\mu}mol\;m^{-2}s^{-1}$, $CO_2$ 농도는 약 $1000{\mu}mol\;mol^{-1}$ 이하에서, 온도는 $20{\pm}3^{\circ}C$ 조건에서 광합성 환경을 조성해 주거나 환경제어를 유지하면 당귀 대량생산 시스템의 최적 조건을 구현하여 높은 생산성을 기대할 수 있을 것으로 사료된다.