• Journal of Periodontal and Implant Science
• /
• v.35 no.3
• /
• pp.623-634
• /
• 2005

Human periodontal ligament fibroblast(hPDLF) is very important to cure periodontal tissue because it can be diverged into various cells. This study examined the expression of MMP-1, TIMP-1, periodontal ligament specific PDLs22, Type I collagen, Fibronectin, TIMP-2, telomerase mRNA in a replicative senescence of hPDLF. The periodontal ligament tissue was obtained from periodontally healthy and non-carious human teeth extracted for orthodontic reasons at the Chosun University Hospital of Dentistry with the donors' informed consent. The hPDLF cells were cultured in a medium containing Dulbecco's modified Eagle medium(DMEM, Gibco BRL, USA) supplemented with 10% fetal bovine serum(FBS, Gibco BRL, USA) at 37C in humidified air with 5% $CO_2$. For the reverse transcription-polymerase chain reaction(RT-PCR) analysis, the total RNA of the 2, 4, 8, 16, 18, and 21 passage cells was extracted using a Trizol Reagent(Invitrogen, USA) in replicative hPDL cells. Two passage cells, i.e. young cells, served as the control, and ${\beta}-actin$ served as the internal control for RT-PCR The results of this study about cell morphology and gene expression according to aging of hPDLF using RT-PCR method are as follows: 1. The size of hPDLF was increased with aging and it was showed that the hPDLF was dying in the final passage. 2. PDLs22 mRNA was expressed in young hPDLF of the two, four, and six passage. 3. TIMP-1 mRNA was expressed in young hPDLF of the two and four passage. 4. There was a tendency that MMP-1 mRNA was weakly expressed over eighteen. 5. Type 1 collagen mRNA was expressed in almost all passages, but it was not expressed in the final passage. 6. Fibronectin mRNA was observed in all passages and it was weakly expressed in the final passage. 7. TIMP-2 and telomerase mRNA were not expressed in this study. Based on above results, it was observed that PDLs22, Type 1 collagen, Fibronectin, MMP-1. and TIMP-1 mRNA in hPDLF were expressed differently with aging. The study using the hPDLF that is collected from healthy patients and periodontitis patients needs in further study.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.109-120
• /
• 2004

There has been outstanding research on the soil-water characteristic curves of unsaturated soils over the past several decades. Unfortunately, unsaturated soil mechanics has not been considered as an important factor in Korea. In this paper, laboratory test and numerical analysis(SoilVision Professional ver 3.04) were performed to investigate the prediction method of soil-water characteristic curve and unsaturated permeability coefficient in reclaimed ground. The pressure cell, desiccator, and tensiometor tests were conducted on three types of reclaimed soils(dredged soil, sand, weathered granite soil). Numerical analysis was executed to compare the results with the laboratory test results and also compared with the results of each prediction method. Based on the laboratory test, three different types of soils have shown different soil-water characteristic curves. The hysteresis fir these soils is clearly defined. As a result of numerical analysis, Fredlund & Xing's method and Fredlund & Wilson's model proved to worke out well for reclaimed ground soils in Korea. Also, predicting method based on the soil-water characteristic curves from the particle-size distributions is flirty reliable for estimating unsaturated permeability coefficient.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.41-51
• /
• 2012

Soils are commonly unsaturated in the near surface. The stiffness of soils is affected by the amount of air and water. The objective of this study is to evaluate the porosity of the unsaturated soils by using the elastic waves including compressional and shear waves. The elastic waves are measured at different degrees of saturation by controlling the matric suction. Thus, the unsaturated soils are characterized at different levels of the matric suction. Shear and compressional waves are measured by using the bender elements and the piezo disk elements, respectively. Both transducers are installed on the walls of the rectangular cell. The unsaturated soils are prepared by using uniform size sands and silts. Test results show that both compressional and shear wave velocities change according to the matric suction. The elastic modulus, the shear modulus, and the Poisson's ratio are estimated based on the measured elastic wave velocities. In addition, the void ratio of the unsaturated soils estimated using elastic wave velocities matches well with the volume based void ratio. This study demonstrates that the elastic waves can be effectively used for the characterization of unsaturated soils.

• Journal of Embryo Transfer
• /
• v.22 no.4
• /
• pp.245-249
• /
• 2007

The aim of present experiment was to examine hatching rate as in vitro indicator of viability of porcine embryos before early stage embryo transfer such as zygotes or 2-cell stage embryos. Cumulus-oocyte complexes (COCs) collected from ovaries were matured in North Carolina State University 23 (NCSU-23) containing 10% porcine follicular fluid (pFF), 10 ng/ml epidermal growth factor (EGF), $10{\mu}g/ml$ follicle stimulating hormone (FSH), $35{\mu}g/ml$ luteinizing hormone (LH), and 1mg/ml cysteine. After 24 hours, the COCs were transferred to the same medium without hormones. After 65h of maturation, oocytes were exposed to phosphate buffered saline (PBS) with 7% ethanol (v/v) for 7 minutes, and then the oocytes were washed and cultured in tissue culture medium (TCM) 199 containing 5 ug/ml cytochalasin B for 5h at $38.5^{\circ}C$ in an atmosphere of 5% $CO_2$ and 95% air with high humidity. After cytochalasin B treatment, the presumptive parthenotes were cultured in porcine zygote medium (PZM)-5 and cleavage of the parthenotes was assessed at 72h of activation, Normally cleaved parthenotes were cultured for an additional 8 days to evaluate their ability to develop to blastocyst and hatching stages. The fetal bovine serum (FBS) were added at Day 4 or 5 with concentrations of 2.5, 5 or 10%. The blastocyst rates were ranged within $39.1{\sim}70%$ in each treatment. However hatching rate was dramatically decreased in non-addition group. In this experiment, embryo viability in female reproductive tract may be estimated before embryo transfer with in vitro culture adding FBS by hatching ability.

• Journal of Bio-Environment Control
• /
• v.12 no.1
• /
• pp.7-11
• /
• 2003

Cellular glass foam (CGF), the reprocessed glass, has a possibility to be used as a medium component in plug culture of horticultural crops due to the its excellent air and water permeability as comparable to perlite. An experiment was conducted to investigate growth of plug seedlings of Lycopersicum esculentum 'Segye' as influenced by irrigation frequency in various medium combinations of CGF (2.0-4.0 mm particle size) and peatmoss. Seeds were sown in 200-cell plug trays, filled with mixtures of CGF and peatmoss either at 33：67 or 25：75 (％. v/v) and were germinated on a fogged propagation bed. The irrigation frequencies used were one, two or three times per every two days. A commercial plug medium (Tosilee medium) was used as the control, and the irrigation frequency in the control was one time per day. Growth of seedlings, and medium pH and EC were measured at 33 days after sowing. The medium composition had little influence on overall growth of seedlings. Irrigation frequency very significant affected number of leaves, leaf area, chlorophyll concentration, fresh and dry weights of shoots and roots, and dry matter. Growth of seedlings was the greatest with the highest irrigation frequency in the 25% CGF＋75% peatmoss mixture.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.2
• /
• pp.139-147
• /
• 1991

The preservative effect of cellophane film packing on the quality of semi-salted and dried mackerel was studied. The product(P) of semi-salted and dried mackerel was prepared from raw mackerel by filleting, cleaning, soaking in 15%9v/w) salt solution for 30min, draining, packing with cellophane film (PT# 300, thickness:$20{\mu}{\textrm}{m}$) and drying for 4 hrs at $40^{\circ}C$ in hot air dryer. The product (C) was also prepared without cellophane film packing after draining. The product (C) and (P) were stored at $5.0{\pm}0.5^{\circ}C$. After processing and during storage, moisture content of product (P) was higher than that of product (C), but contents of VBN(volatile basic nitrogen), amino nitrogen and TMA of product (P) on dry basis were lower than those of product (C). Viable cell count, TBA value, peroxide value and decreasing rate of polyenoic acid of product (P) were also lower than those of product (C). In sensory evaluation, the shelf life of product (C) was about 9 days and that of product (P) was about 14 days. From the results of chemical and sensory evaluation, it was concluded that cellophane film packing was a good condition for preserving the quality of semi-salted and dried mackerel.

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.461-468
• /
• 2006

Optical characteristics in polymer films of MEH-PPV/DFPP blends were for the first time investigated. DFPP (N, N'-diperfluorophenyl-3,4,9,10-perylenetetracarboxylic diimide) used here was a novel n-type polymer, which had good stability in air and solubility in common solvents. For a 1:9 DFPP:MEH-PPV blend, highly efficient quenching of photoluminescence (PL) was observed. In addition, the photocurrent responses of these MEH-PPV/DFPP photovoltaic cells were measured. When the light intensity was $50mW/cm^2$, short-circuit photocurrent densities were two times higher than those of single layer MEH-PPV devices.

• Food Science and Preservation
• /
• v.18 no.3
• /
• pp.288-293
• /
• 2011

This study investigated the changes in the quality of fresh-cut lotus roots that were treated with hot water. Lotus roots were purchased from Daegu, Korea. They were washed, peeled, and cut into lcm-thick slices with a ceramic knife. The peeled and sliced lotus roots were dipped for 45 sec in water at 30, 55, and $80^{\circ}C$. After they were air-dried at room temperature, the slices were packed in polyethylene films and stored at $4^{\circ}C$ for 12 d. Then the changes in the weight loss, color, total viable cell, and sensory characteristics were measured. Generally, the weight loss of the lotus roots that were treated with hot water slightly increased. The application of the heat treatment delayed the browning of the lotus roots, especially the treatment with $55^{\circ}C$ hot water. The L and a values of the lotus roots that were treated with $80^{\circ}C$ hot water significantly increased during their storage, though. The heat treatment effectively inhibited the growth of microorganisms. The organoleptic quality of the lotus roots that were treated with $55^{\circ}C$ hot water was the best.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.542-547
• /
• 2021

Glass lined impellers are corrosion resistant to most chemicals, including strong acids, and also have a smooth, non-stick surface, easy to clean and free from impurities in the process. Glass lined home base impeller is a multi-purpose impeller designed to stir a wide viscosity range of liquids from low viscosity fluids to high viscosity fluids, among others, cell culture, yeast culture, and beer fermentation pots, especially used for air-water system breathable stirring. The glass lining for HB impellers, which are simple in structure and competitive in performance, is essential to have upper and lower division in order to make the joint area between the impeller and shaft as small as possible. The upper and lower division of the impeller hardly affects the mixing performance, but the aeration performance. In this study, in order to optimize the shape of the Glass Lining HB impeller, a study was conducted on the effect of the angle between the upper and lower impellers, the clearance between the impellers, and the number of baffles on the aeration power. The optimal shape and baffle plate conditions for the Glass lined HB impeller were derived through the study results that the angle and the clearance between the upper and lower impellers decreased the ration of the power consumption with aeration P_g and that without aeration P₀, P_g/P₀.

• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.720-726
• /
• 2019

Recently, research on cost reduction and efficiency improvement of crystalline silicon(c-Si) photovoltaic(PV) module has been conducted. In order to reduce costs, the thickness of solar cell wafers is becoming thinner. If the thickness of the wafer is reduced, cracking of wafer may occur in high temperature processes during the c-Si PV module manufacturing process. To solve this problem, a low temperature process has been proposed. Conductive paste(CP) is used for low temperature processing; it contains Sn57.6Bi0.4Ag component and can be electrically combined with solar cells and ribbons at a melting point of $150^{\circ}C$. Use of CP in the PV module manufacturing process can minimize cracks of solar cells. When CP is applied to solar cells, the output varies with the amount of CP, and so the optimum amount of CP must be found. In this paper, in order to find the optimal CP application amount, we manufactured several c-Si PV modules with different CP amounts. The amount control of CP is fixed at air pressure (500 kPa) and nozzle diameter 22G(outer diameter 0.72Ø, inner 0.42Ø) of dispenser; only speed is controlled. The c-Si PV module output is measured to analyze the difference according to the amount of CP and analyzed by optical microscope and Alpha-step. As the result, the optimum amount of CP is 0.452 ~ 0.544 g on solar cells.