• Journal of Environmental Impact Assessment
• /
• v.29 no.1
• /
• pp.45-60
• /
• 2020

In the past, air pollution, water pollution and solid waste were very important items, but at present environmentally sound land use, ecosystem conservation and sustainable socio-economy have become very important in EIA. According to the consultation result of SEA and Small scale EIA during 2012~2019, most results are 'Conditional Agreement'. Especially EIA consultation results before 2016 were mostly (94.1 %) 'Agreement', but since 2017 most (87.4 %) are 'Conditional Agreement'. And the percentage of 'Non Agreement' have sharply increased from 0.3~0.6 % (during 2013~2016) to 1.3~3.1 % (during 2017~2019). In case there have been no change in EIA system and consultation techniques, the problems of inconsistency and unfairness could be raised. Therefore are urgently required researches on environmentally sound land use, ecosystem conservation and sustainable socio-economy which decide location feasibility assessment. The purpose of this study is to analyse the consultation cases of SEA, EIA, and Small scale EIA since 2012, and to identify key factors which result in the decision of nonagreement of development plans and development projects, and to suggest the improvements on EIA consultation based on land use regulation and environmental grade.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.527-532
• /
• 2005

Ionic polymer metal composites (IPMC) are soft polymeric smart materials having large displacement at low voltage in air and water. The polymeric electrolyte actuator consists of a thin and porous membrane and metal electrodes plated on both faces, in impregnation electro-plating method. The response and actuation of actuator are governed. Among many factors governing the activation and response of IPMC actuator, the surface electrode plays an important role. In this study, the well-designed modification of electrode surface was carried out in order to improve the chemical stability well as electromechanical characteristics of the IPMC actuator. We employed Ion Beam Assisted Deposition (IBAD) method to prepare the topologically homogeneous thin surface electrode. After roughing the surface of Nafion membrane in order to get a larger surface area, the IPMC was prepared by impregnation for electro-plating and re- coating on the surface through traditional chemical deposition, followed by an additional surface treatment with high conductive metals with IBAD. It was observed that our IPMC specimen shows the enhanced surface electrical properties as well as the improved actuation and response characteristics under applied electric field.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.2
• /
• pp.119-126
• /
• 1999

A numerical model using soil surface energy balance and soil heat flow equations to estimate mulched soil temperature was developed. The required inputs data include weather data, such as global solar radiation, air temperature, wind speed, atmospheric water vapor pressure, the optical properties of mulching material, and soil physical properties. The observed average soil temperature at 50 cm depth was used as the initial value of soil temperature at each depth. Soil temperature was simulated starting at 0 hour at an interval of 10 minutes. The model reliably described the variation of soil temperature with time progress and soil depth. The correlation between the estimated and measured temperature yielded coefficient values of 0.961, 0.966 for 5cm and 10cm depth of the bare soil, respectively, 0.969, 0.965 for the paper mulched soil, and 0.915, 0.938 for the black polyethylene film mulched soil. The percentages of absolute differences less than 2$^{\circ}$C between soil temperatures measured and simulated at 10 minute interval were 97.4% and 98.5% for 5 cm and 10cm for the bare soil, respectively, and 95.8% and 97.4% for the paper mulched soil, and 70.1% and 92.5% for the polyethylene film mulched soil. The results indicated that the model was able to predict the soil temperature fairly well under mulched condition. However, in the night time, the model performance was a little poor as compared with day time due to the difficulty of accurate determination of the atmospheric long wave radiation.

• Journal of Life Science
• /
• v.25 no.5
• /
• pp.577-584
• /
• 2015

Orostachys malacophyllus grow on the old roofing tile or on the rock of mountain and is belong to Crassulaceae family. After air drying for Orostachys malacophyllus (OM), using the mixture of lactic acid bacteria (Lactobacillus bulgaricus, Streptococcus thermophilus, Lactobacillus acidophilus) was fermented (FOM). OM and FOM extracted using water (W), ethanol (E) and methanol (M) and were measured extracts yield, pH and Brix. Extracted OM and FOM were tested by in vitro experimental models of α,α´-diphenyl-β-picrylhydrazyl (DPPH) radical scavenging activity, Fe/Cu reducing power, linoleic acid peroxidation using ferric thiocyanate and thiobarbituric acid (TBA) methods and peroxidation of rat liver homogenate. In addition, the bioactive materials (phenolic compounds, flavonoids and minerals) were measured. The highest phenolic compounds and flavonoids were OME 122.2 mg/100 g and OME 84.0 mg/100 g. OM and FOM′s major minerals were K, Ca and Mg. The highest free radical scavenging activity showed in FOMM (93.9%), OMM (93.4%), FOME (92.1%) and OME (91.9%) at 0.5% additional level. Fe reducing powers were strong in FOME and FOMM and Cu reducing powers were strong in OME and FOMM. Antioxidant activities on lipid peroxidation using rat homogenate as measured by TBARS method showed strong in FOME and on lipid peroxidation of linoleic acid as measured by ferric TBA method showed strong in OME and FOME and measured by ferric thiocyanate showed strong in FOME and FOMM.

• Korean Journal of Food Science and Technology
• /
• v.4 no.4
• /
• pp.285-290
• /
• 1972

Oranges (Citrus unshiu var.) from local orchards at Seogwi, Daejeong, Hanrim, Cheju and Seongsan where are in the southern, southwestern, northwestern, northern and eastern parts of Cheju island respectively were stored in a semi-underground room and an air-circulating refrigerated store. To compare the storage qualities between the growing districts, changes in freshness, acidity and sugar content of oranges were investigated during storage. 1) Oranges from Seogwi and Cheju districts showed remarkably lower Percentage of rot fruits with no relation of storage temperature than those of Hanrim, Daejeong and Seongsan. 2) Browning of oil gland was severe on oranges of northern and southern districts while it was little developed in case of the other districts. 3) Water soluble total sugar content was gradually increased and titratable acidity and reducing sugar content of pulp tissues was decreased during storage. 4) Oranges from the western part showed the higher ratio of sugar content to acidity and better taste as compared with the east oranges.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.6 no.1_2
• /
• pp.76-80
• /
• 1973

Cyclina sinensis is an edible bivalve inhabiting wide tidal flats which are exposed to the air at ebb tide along the western coast of Korea. Over the period of June to September 1971, some specimens from a tidal flat near Inchon were submerged in sea water with various concentrations of ammonium hydroxide added and careful observations were made on their fertilization, early development, and metamorphosis of the larvae. The highest rate of fertilization was demonstrated by individuals treated with 1/1000 normal solution of ammonium hydroxide and their fertilized eggs followed normal development, i.e., two cell stage 1.5 hours after fertilization, blastular stage after 4 hours, and trochophore stage after 6 hours. Within 24 hrs after fertilization C. sinensis larvae have acquired the form of early straight-hinge veliger with the mean prodissoconch I with the length of $110\mu$. It takes seven days to get the umbo stage with the mean shell length of $190\mu$ and twenty days to get the morphosing stage with the mean shell length of $260\mu$. The larvae were cultured to the metamorphosing stage with the shell length of $270\mu$ in the laboratory condition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.719-725
• /
• 2014

This study was investigated for the purpose of obtaining basic data for application to the canning process of salt-fermented anchovy Engraulis japonica fillet using tomato paste. The salt fermented anchovy fillet was prepared by fermenting anchovy fillet with salt 15% at $5^{\circ}C$ for 15 days and then cold air drying the salt-fermented anchovy fillet for 1 h at $16{\pm}1^{\circ}C$. The dried salt-fermented anchovy fillet 85 g was filled with 60 g of tomato paste sauce (tomato paste 42%, gum guar 1.0%, salt 2.0%, starch syrup 2.0%, cooking wine 1%, water 52%) and seamed by vacuum seamer in 301-3 can, then sterilized at Fo 9 and 11 min in a steam system retort at $121^{\circ}C$, respectively. The factors such as chemical composition, pH, total volatile basic nitrogen (TVB-N), amino-N, color value (L, a, b), texture profile, thiobarbituric acid (TBA) value, sensory evaluation and viable bacterial count of the canned salt-fermented anchovy fillet were measured. Texture value of the product sterilized at Fo 11 min was higher than at Fo 9 min condition. In both sterilized cans, the viable bacterial counts were not detected. There was no remarkable difference in physicochemical between sterilization conditions. As a result of sensory evaluation, most sensory evaluation inspector judged that it was difficult to distinguish the sensory difference of both products sterilized at Fo 9 min and at 11 min. The results showed that sterilization of Fo 9 min was more desirable than that of Fo 11 min to prepare canned salt-fermented anchovy fillet using tomato paste sauce, because this condition is more economical.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.601-610
• /
• 2007

Statement of problem: The adhesion between titanium and ceramic is less optimal than conventional metal-ceramic bonding, due to reaction layer form on cast titanium surface during porcelain firing. Purpose: This study characterized the effect of titanium-ceramic adhesion after gold and TiN coating on cast and wrought titanium substrates. Material and method: Six groups of ASTM grade II commercially pure titanium and cast titanium specimens$(13mm{\times}13mm{\times}1mm)$ were prepared(n=8). The conventional Au-Pd-In alloy served as the control. All specimens were sandblasted with $110{\mu}m\;Al_2O_3$ particles and ultrasonically cleaned for 5min in deionized water and dried in air before porcelain firing. An ultra-low-fusing dental porcelain (Vita Titankeramik) was fused on titanium surfaces. Porcelain was debonded by a biaxial flexure test at a cross head speed of 0.25mm/min. The excellent titanium-ceramic adherence was exhibited by the presence of a dentin porcelain layer on the specimen surface after the biaxial flexure test. Area fraction of adherent porcelain (AFAP) was determined by SEM/EDS. Numerical results were statistically analyzed by one-way ANOVA and Student-Newman-Keuls test at ${\alpha}=0.05$. Results: The AFAP value of cast titanium was greatest in the group 2 with TiN coating, followed by group 1 with Au coating and the group 3 with $Al_2O_3$ sandblasting. Significant statistical difference was found between the group 1, 2 and the group 3 (p<.05). The AFAP value of wrought titanium was greatest in the group 5 with TiN coating, followed by the group 4 with Au coating and the group 6 with $Al_2O_3$ sandblasting. Conclusion: No significant difference was observed among the three groups (p>.05). The AFAP values of the cast titanium and the wrought titanium were similar. However the group treated with $Al_2O_3$ sandblasting showed significantly lower value (p<.05).

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.472-477
• /
• 2011

To study the effects of the acid group of functionalized MWNT (multiwalled carbon nanotube) on the thermal and mechanical properties of polyacrylonitrile(PAN) nanofibers, acid ($H_2SO_4/HNO_3$) treated MWNT (O-MWNT) were further functionalized by diazonium salt reaction with 5-aminoisophthalic acid (IPA). Compared to O-MWNT, IPA-MWNT with isophthalic acid group showed a better dispersion stability in polar solvents and IPA-MWNT/PAN composite film displayed lower heat of reaction (${\Delta}H$) than that of homo PAN when stabilized under air atmosphere. The continuous electrospun fibers were prepared using a conductive water bath. PAN fibers containing 1 wt% of IPA-MWNT showed an increase of tensile strength by 100% and tensile modulus by 240% compared to the PAN fibers without IPA-MWNT.

• Korean Journal of Environment and Ecology
• /
• v.23 no.1
• /
• pp.50-55
• /
• 2009

To understand the status of the migrating Oriental Honey Buzzard(Pernis ptilorhynchus) in Korea, we carried out a preliminary study on the number and local movements of the Honey Buzzard from September 2005 to October 2007 at Hongdo Island, Jeonnam Province, Korea. A total of 702 Honey Buzzards in 2005, 404 individuals in 2006, and 659 individuals in 2007 were recorded during the fall migration season, but during the spring migration season only two and eight birds were observed in 2006 and 2007 respectively. The migrating Honey Buzzard showed peak numbers from 20 September to 5 October at the study site. According to observation of arrival time of538 Honey Buzzard in October 2007, a total of 2l6 birds(40.l %) were passing over Hongdo Island between 7:00 AM to 8:00 AM, rising skyward on columns of warm air. This suggests the use of thermal currents and avoidance of nocturnal movement for crossing water. They preferred moderate winds(<5 m/s in speed) from northwest, but the migrating number apparently decreased in case of strong winds (${\geqq}5 m/s$). This suggests that wind speed and direction are important environmental factors for migration of the Oriental Honey Buzzard. At present, it is unclear which breeding population(from north-eastern China or Japan) passes over Hongdo Island. Moreover, it is difficult to prove migration route and to understand migratory behaviors of the Oriental Honey Buzzard in Korea. To prove the breeding sites and routes of the migrants over the study site, we need more detailed and further studies such as satellite tracking researches.