• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.1-11
• /
• 2015

PURPOSES : This study set out to investigate the fundamental properties of alkali-activated concrete (AAC) using modified slag as the pavement maintenance material. METHODS: The material properties of modified slag based alkali-activated concrete (MSAAC) were analyzed and evaluated against those of alkali-activated slag concrete (AASC). Several mix formulations were considered, including one MSACC and four AASCs. The main variables considered in the study were slump, air content, compressive strength, rapid chloride permeability test, scaling resistance, freeze-thaw test, XRD, SEM, and EDS. RESULTS: MSAAC exhibits a compressive strength in excess of 21 MPa six hours after curing. Also, the charge passed of the MSACC was found to be less than 2000 coulombs after seven days and about 1000 coulombs after 28 days. The weight loss determined from a scaling test did not exceed $1kg/cm^2$ in the case of the MSACC, but that of the AASCs had already exceeded $1kg/cm^2$ at the 10th cycle. Based on the results of the freeze-thaw test, the relative dynamic modulus of every mix was found to be in excess of 90%. An energy dispersive spectroscopy(EDS) analysis found that the weight rate percentage of the calcium and aluminum in the MSAAC mix is twice that of the AASC mixes. CONCLUSIONS : It was found that the MSAAC mix exhibits significantly better performance than AASC mixes, based on various fundamental properties.

• 한국식품저장유통학회지
• /
• 제5권3호
• /
• pp.239-246
• /
• 1998

폴리이미드 고분자막을 사용한 질소부하 장치를 설계하고, 이를 CA 저장에 활용하기 위한 기술적 기본 데이터를 제시하였다. 순수 산소 및 질소의 투과특성은 dual-mode sorption 모델로서 설명될 수 있었으며, 공기 중의 산소의 투과율은 공기 중에 존재하는 질소의 영향으로 순수 산소의 투과율에 비해 크게 감소하나, 공기 중의 질소의 투과율은 산소의 영향으로 순수 질소의 투과율에 비해 증가하였다. 수행한 압력 및 온도 범위 내에서 이상분리인자는 5에서 6 사이의 값을 나타내었으며, 공기의 분리인자는 이상분리인자보다 작은 값을 나타내었다. 산소의 투과활성화에너지가 질소의 투과 활성화에너지보다 커서 이상분리인자는 온도가 증가함에 따라 증가하였다. 제품회수율이 증가함에 따라 농축부의 질소농도는 급격히 감소하였으며, 이로부터 제품회수율은 CA 저장고에서 요구되는 질소농도를 얻기 위한 주요 조업인자임을 알 수 있었다. Polyimide 막 시스템을 이용한 CA 저장 공정의 가상적인 모형을 설정하고, 시스템의 조업시간에 따른 저장고의 질소농도를 예측할 수 있는 관계식을 제시하였다.

• 대한인간공학회지
• /
• 제35권1호
• /
• pp.1-10
• /
• 2016

Objective: This study aimed to find good design for summer functional farm shoes under the agricultural environment and working characteristics, which can help safe farm work and further promote the efficiency of working. Background: Most accidents at farms were overturn accidents caused by slipping or falling, and it was found that the main factors which caused the overturn accidents were inappropriate work shoes for the working conditions. These inappropriate work shoes often cause overturn accidents in the rural areas with steep paths. Method: A survey on work shoes was conducted with 174 farmers, and the outcome of this survey was used to find problems of work shoes and improvement ideas for the design of work shoes which can be used at farms. Results: Regarding the form of farm shoes, the ankle height was set at 6 inches to prevent the bending of the ankle and the inflow of foreign substances. The size and groove of the pattern of the outsole were extended to prevent catching of foreign substances. In the upper part, polyurethane and cordura were used in combination to secure air permeability, which was pointed out as the reason for the discomfort during the work wearing existing work shoes. Conclusion: Since farmers felt discomfort with the shoes which they were currently wearing, this study suggested a design of farm shoes by analyzing the important matters of the work shoes in development in order to improve such discomfort. Application: This study can help develop farm shoes that would practically ease farmers' burden of working at farm worksites and keep them safe.

• 한국환경과학회지
• /
• 제25권6호
• /
• pp.889-895
• /
• 2016

In Danseong-myeon (myeon is a subdivision of), Sancheong-gun, and Sugok-myeon, Jinju City, pot seedling culture was used at the rates of 100% and 62%, respectively. Root restriction seedling culture was used relatively more frequently than pot seedling culture in Yangchon-myeon, Nonsan City, Guryong-myeon, Buyeo-gun, and Wolsan-myeon, Damyang-gun. Open-field seedling culture was used at the rates of 80% and 54% in Samnangjin-eup (eup is a subdivision of a gun), Miryang City and Ssangnim-myeon, Goryeong-gun, respectively. In Danseong, Sancheong, and Sugok, Jinju, granite soil was used as the medium for pot seedling culture at the rates of 90% and 80%, respectively. In Yangchon, Nonsan, Wolsan, Damyang, and Ssangnim, Goryeong, commercial bed soil and coir dust were used for seedling culture at the rates of 73%, 64%, and 60%, respectively. At the main production sites, the use of granite soil for seedling culture, highest rate in 2000-2005, continued to decrease; in 2011-2013, granite soil was used at the rate of 37%, while commercial bed soil and coir dust were used at the rates of 32% and 14%, respectively. The bulk density of commercial bed soil, expanded rice hulls, and coir dust was $0.11-0.16g/cm^{-3}$. Coir dust was the lightest material but had the highest and, 36.7% and 21.8%, respectively. In sandy loam soil and granite soil was low. The pH of all growth media was between 5.4 and 7.0, and the values were in the range of $0.15-0.66dS{\cdot}m^{-1}$. However it was necessary, to adjust the pH levels and enhance the of expanded rice hulls, sandy loam soil, and granite soil. Similarly, the fertilizer concentration and air permeability of coir dust need to be adjusted.

• 한국결정성장학회지
• /
• 제27권4호
• /
• pp.191-195
• /
• 2017

본 연구에서는 공기 정화식 마스크의 필터로 사용되는 일반적인 부직포와 전기방사 나노섬유가 코팅된 부직포에 대한 미세 구조를 분석하고 미세먼지 차단 특성을 향상 시킬 수 있는 새로운 마스크 디자인을 제안하였다. 평균적으로 $25{\mu}m$의 직경을 갖는 부직포 섬유와 달리 전기방사 방법으로 형성된 나노섬유는 그 직경이 25 nm~120 nm로 매우 작아 비표면적이 크고, 불규칙적으로 배열된 촘촘한 그물방 구조를 갖고 있었다. 일반적인 부직포 필터는 부직포 섬유 표면의 정전기력에 의해 미세먼지를 흡착할 수 있었지만, 수십 ${\mu}m$ 크기 이상의 기공이 부직포 전반에 걸쳐 존재하기 때문에, 수 ${\mu}m$ 크기를 갖는 미세먼지를 여과하는데 한계가 있었다. 반면 나노섬유가 코팅된 부직포 필터의 경우, 나노섬유의 구조적 특성으로 인해 투과성과 통기성을 유지하면서 수 ${\mu}m$ 크기의 미세먼지를 기계적으로 흡착하여 효과적으로 여과할 수 있었다. 우수한 마스크 필터의 성능과 더불어 올바른 마스크 착용이 미세먼지 차단 특성을 극대화 할 수 있는데, 이를 위해 안면부와 마스크 사이의 틈으로 미세먼지의 유입을 막을 수 있도록 안면부에 밀착이 잘 될 수 있는 새로운 마스크 디자인을 제안하였다.

• 콘크리트학회논문집
• /
• 제18권3호
• /
• pp.371-378
• /
• 2006

현대사회에 있어 필수불가결한 사회기반시설인 하수시설은 대부분 주요 재질이 콘크리트이며, 이러한 콘크리트 하수시설은 최근 황산화세균에 기인한 생화학적 부식에 의해 심각하게 열화되고 있는 상황이다. 이에 본 연구에서는 생화학적 부식을 방지하기 위한 기법으로서 황산화세균의 생장을 억제할 수 있는 항균제를 개발한 후 황산화세균에 대한 항균성능을 평가하였으며, 콘크리트에 대한 적용성을 검토하기 위해 항균제를 도포한 콘크리트의 각종 물리적 성능 및 내구성능을 실험적으로 검토하였다. 그 결과 항균제의 항균성능은 유효하였으며, 항균제 도포에 의한 압축강도 및 부착강도는 유의할 만한 경향을 보이지 않았고, 마모저항성, 흡수 및 투기 저항성, 중성화 염해 및 화학저항성은 현저히 증가하는 것으로 나타났다.

• 한국의류산업학회지
• /
• 제16권4호
• /
• pp.645-652
• /
• 2014

This study identifies consumer needs and a pattern sensory evaluation of jacquard fabrics for raincoats using quick-drying-absorbing polyester. We investigate the consumer's consciousness and raincoat improvements. Twelve kinds of jacquard fabrics were developed for use in this study. Developed jacquard fabrics were assessed subjectively by 152 university students using a 7-point scale of 26 consumer needs and 31 pattern image sensory descriptors. Data were analyzed by SPSS. The major results were: There was a need for consumers to improve the front fastener type, cuff fastener, mesh patch position, and raincoat pocket position. The most important parameter to choose raincoat fabric was waterproof and the other parameters were vapor-porous/water repellent, design, color, fashionability, air-permeability and easy-put on/off. The pattern image sensibility of jacquard fabrics was explained by seven factors: gorgeous, simple, cute, futuristic, ethnic, feminine, and cool. A higher pattern preference was found in the jacquard fabrics of unique, sporty, natural, luxurious, and trendy images. The pattern preference was predicted at 45.3% with gorgeous, simple, pure, cute, futuristic factors. The correlation coefficient between the pattern image sensibility factor 1 (gorgeous) and pattern preference was 0.674 and with factor 3 (cute) was 0.416, and with factor 6 (cool) was 0.209. The 4 factors (gorgeous, simple, cute, futuristic) were selected as a significant pattern image sensibility that influenced preference.

• 한국의류산업학회지
• /
• 제16권4호
• /
• pp.614-624
• /
• 2014

This study is intended to offer basic data for developing outdoor clothing exported to China by identifying how Chinese consumers use outdoor clothing. To accomplish the objective, a survey was conducted on 300 male and female Chinese tourists in their 10s to 40s who have purchased outdoor clothing before. As more than twice as many respondents said they wear sweatsuit or everyday clothes for mountain-climbing instead of outdoor clothing, the necessity of outdoor clothing is obviously perceived at a low level. Among them, 57.4% wear outdoor clothing as townwear in everyday lives, and other respondents are dissatisfied with the design. Thus, it is necessary to develop townwear-style design. When buying outdoor clothing, wearability was the biggest consideration. Also, the first criteria for evaluating outdoor clothing was practicality for mountain-climbing activities. The functionality of outdoor clothing they needed the most was air permeability. As for outdoor clothing top, the main inconvenience was tightness around the neck. As for bottoms, it was tightness of pants when bending knees. In terms of areas to be improved, the No. 1 was unformed design. Thus, it is imperative to develop design of diverse styles. As the Chinese outdoor clothing market has grown significantly in recent years, the following should be executed by domestic companies before advancing to the market. First, they should form Korean brand image and boost the brand awareness with various activities, amid Korean Wave. Second, they should develop preferred designs among Chinese consumers and strengthen functionality of products, based on consumer survey.

• 한국지역사회생활과학회지
• /
• 제23권3호
• /
• pp.317-328
• /
• 2012

In this study, printing was introduced to the common dip-dyeing method of persimmon juice dyeing so as to develop two different colored persimmon juice dyed fabrics with printings of 'jorangmal' patterns (a national monument) instead of producing a plain textile. Following are the results of a comparative study between the persimmon dyed fabric and undyed fabric, both with printings, in terms of its properties, and hand values. Cotton and rayon were chosen as samples and were compared separately. Firstly, the samples showed differences in terms of clarity and visual sensation depending on the presence of persimmon dye, even if the same pattern and color was used. Secondly, the air permeability of two samples improved after persimmon dyeing even though their thickness increased, and their moisture regain increased as well in all humidity conditions. Thirdly, protectiveness against UV increased in dyed samples, and sweat, sunlight, and compound colorfastness improved in printed dye-fabrics compared to plain dyed ones. Therefore, printing proved to be effective in preventing discoloration. Fourthly, tensile linearity and resilience, bending rigidity, compressive linearity and resilience, and shearing stiffness increased more in the dyed samples compared to undyed ones. However, shearing recovery decreased in both dyed fabrics. Fifthly, the result of its hand value showed that Koshi value increased in all samples than undyed ones, whereas Fukurami, Numeri, and Softosa values decreased. Incorporating printing in persimmon dyeing process could expect creative outcomes not only in today's diverse fashion but in areas of arts or crafts as well.

• 복식
• /
• 제57권3호
• /
• pp.53-62
• /
• 2007

The purpose of this study was to investigate mechanical and comfort performances of the material for the improved working uniform for a volunteer fire brigade member, to get basic data for its evaluation and to help its material and design development. The results were as follows; The material of the newly developed working uniform was thinner and lighter than the material of the current used working uniform. It had better breathability, air permeability and heat transmission rate than the current one. It also had superior anti-flammability In all mechanical properties(tensile, bending, shearing, compression and surface properties), it showed better performances than the current one. It elongated and bended easier and more in both warp and weft directions. The elastic recovery and shape stability after elongation were also higher. The recovery and resistance to shearing and the resiliency and recovery after compression were also better than the current one. It was more flexible, softer and smoother in primary hand value, and was more suitable for the material for winter suit which needs softness and fullness in total hand value. The material of the improved working uniform showed lower thermal insulation value and higher evaporative resistance value compared to the material of the currently used working uniform from the sweating thermal manikin test. It was shown that the physical performances and the hand value of the textile material used in the newly developed working uniform for a volunteer fiber brigade member was improved compared to the one used in the currently used working uniform.