• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.219-228
• /
• 2010

A two-dimensional mathematical model was developed to predict the temperature and moisture-content profiles of a tumble dryer during infrared drying. The model is based on the movements of liquid water and moisture in the object and on the fluid and heat transfer in the drying air. The model was solved by the finite volume analysis for the fluid, temperature, and radiation intensity fields. After deriving the governing equations and developing the two-dimensional tumble dryer models, numerical investigations were carried out to examine the effects of various parameters such as the heater temperature and the heating patterns on the drying mechanism of the tumble dryer. All the results show that the drying time can be reduced by using the IR heater.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.510-515
• /
• 2007

A Study on Typical Rates of Water-use for School Facilities has been carried out in this work. Water supply system is given much weight in school facilities. Therefore, it set up a basis efficiency using of water sources to calculate typical rates of water use. The results are summarized as follows ; 1) On the whole, typical rates of water-use was founded out 15 L / stu. d in pirmary school, 10 L / stu. d in middle school and 30L / stu. d in high school smaller than the existing it. It was rate of water-use change as season and Max. Rates of water-use was July. 2) I deem that school hours are 5 hour's in primary school, 7 hour's in middle school and 8 hour's in high school. It the concept of 1 hour that is lesson time 40 minutes and resting time 10 minutes in primary school, lesson time 45 minutes and resting time 10 minutes in middle school and lesson time 50 minutes and resting time 10 minutes in high school. 3) It is desired that we calculate the volume of pump and water tank throughout this concept and the size of water tank should be 1.5 times with taking pick load into consideration by this study on typical rate of water-use. 4) The amount of using water increases in gradually and I consider the life cycle of facilities is more than 10 years. As a result, I can forecast that the size will be insufficiency but I deem that if we devise a plan about parallel pumping on water tank space, we can cope with it. Also, it is expected that we can cut back the transport energy by controlling pump volume.

• Journal of Korean Academy of Nursing
• /
• v.25 no.3
• /
• pp.457-471
• /
• 1995

This research was done to promote improvement of practical application of nursing diagnoses and to improve the quality of nursing. The subjects of this research were 156 second year students of C junior nursing college who were giving adult patient care. The nursing diagnoses of 312 reports were analyzed using NANDA. In these case reports only nursing diagnoses were considered, of which there were a total of 982. In the data analysis the 9H of the nursing students' nursing diagnoses matched with 105 NANDA nursing diagnoses, Of these, the most frequent diagnoses were pain(165, 17.48%), anxiety(101, 10.70%), alteration in nutrition(83, 8.79%) , sleep disturbance (67, 7.10%), in activity intolerance (67, 7.10%), ineffective breathing pattern(51,5.40%). The etiology for the students' nursing diagnoses were compared with NANDA's nursing diagnoses by frequency. The most frequent etiology for the nursing diagnoses of pain was a biological etiology(50, 31%), for anxiety, situation crisis(58, 57.43%), for alteration in nutrition, indigesion(23, 27.71%), for sleep disturbance, external etiology(25, 37.32%), for activity intolerance, immobile position(22, 32.84%), for ineffective breathing pattern, pain(35, 68.63%), and for ,impaired physical mobility, pain(31, 65.96%). The most frequent etiology for constipation was inadquate digestion of water and cellulose (16, 34.78%), for fluid volume felicity, loss of body fluid (21, 52.50%), for impaired skin integrity, external etilogy(16, 43.24%), for impaired physical mobility, pain(22, 62.86%) , for knowledge deficits, cognition disturbance(9, 27.27％), for ineffective air way clearance, secretion obstruction(14, 48.27%) , for impaired gas exchange, loss of transport ability of blood oxygen(9, 37.50%) , and for powerlessness, therapy environment (5, 22.73%). The number of nursing diagnoses by pattern was exchange(16), moving(6), feeling(4), choosing(4), relating(3), communication(1), perceiving(1), knowing(1), valuing(1).

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.129-137
• /
• 2019

The purpose of this study is to analyze the efficiency of budget utilization of science and technology by the Chinese autonomous province and to present the direction of improvement. Data were obtained from the 2013-2017 statistical yearbook of higher education published by the Ministry of Education of China, and efficiency was analyzed using the malmquist analysis method. The analysis found that the low technological progress caused changes in the productivity MPI index, and that cities affected by technological efficiency needed to improve internal factors such as internal coordination and restructuring of universities in the region to increase efficiency. And it was found that areas affected by technological change needed proper response to external factors such as government policy, economic environment, social environment or technological development. This study is meaningful in that it presented reference data in enhancing efficiency of budget utilization of science and technology by autonomy of China, and it is necessary to establish strategies and study essential factors to increase efficiency of inefficient areas in the future.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.147-157
• /
• 2019

The purpose of this study is to analyze the efficiency of urbanization in 31 provinces and cities in China, including both desirable and non-expected outputs produced during the urbanization process. Efficiency was analyzed by applying the SBM-DEA model using the urbanization calculation data of 2017 in 31 provinces and cities in China. The results show that the urbanization efficiency of eastern region is the highest, followed by central region and northeast region, and the urbanization efficiency of western region is the lowest. This study is meaningful in that it analyzes the efficiency of urbanization in 31 provinces and cities in China and suggests the direction of continuous urbanization policy. This study is limited in that it does not reflect the past trend only by conducting cross-sectional analysis for one year in 2017, and it is necessary to comprehensively evaluate urbanization efficiency by conducting additional longitudinal area analysis in the future.

• International Journal of Advanced Culture Technology
• /
• v.8 no.2
• /
• pp.192-203
• /
• 2020

Although the market demand for cold-chain logistics of agricultural products in China is growing rapidly, the technology and scale of cold-chain logistics in China still lag behind the developed countries, resulting in large energy consumption. In our country, many authors have studied the efficiency of cold-chain logistics by using analytic hierarchy process and data envelopment method, but they haven't eliminated the influence of environmental factors and random error factors on the efficiency of cold-chain logistics, and most of them are limited to regional research. Therefore, in this paper, the three-stage DEA method is used. Based on the green logistics idea, firstly, the efficiency of 29 listed logistics enterprises in China is analyzed. Secondly, this paper uses SFA model to exclude the influence of environment and error factors on the analysis results, taking the enterprise's operating years, local GDP and the proportion of cold chain assets as environmental variables. Finally, this paper estimates the efficiency value again by adjusting the input value. The results are as follows: the main reason of high efficiency enterprises is to achieve scale efficiency. So the scale of assets should be maintained or appropriately expanded. At the same time, the economic development and the number of years of enterprise establishment will significantly affect the efficiency of cold-chain logistics. The influence of these environmental variables on the accuracy of the analysis conclusion should be fully considered.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.27-37
• /
• 1998

The sloshing is very important in a safe transport of the liquid cargo by a ship. With the increasing number of supertanker and LNG carriers, this problem has become increasingly more important. In order to study the magnitude and characteristics of impact pressures due to sloshing, experiments ware performed with a rectangular tank and compared with numerical results. Structural responses of tank wall under impulsive pressures were measured. Structural vibrations induced by the sloshing load were analysed by including hydroelastic erects in terms of added mass and damping. To check the validity of the numerical model, the natural frequencies of plate in air and water were compared with measurements, and a good agreement was found. In the case that a plate vibrates under impulsive loads, the pressure on the flexible plate is larger than that on the rigid plate without hydroelastic effects, which was confirmed experimentally. The frequency of oscillatory pressure as well as accel%pion coincides with the natural frequency of plate in water.

• Particle and aerosol research
• /
• v.9 no.2
• /
• pp.89-102
• /
• 2013

24-hr $PM_{2.5}$ samples were collected from January 19 through February 27, 2009 at an urban site of Gwangju and analyzed to determine the concentrations of organic and elemental carbon(OC and EC), water-soluble OC(WSOC), eight ionic species($Na^+$, $NH^{4+}$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, $Cl^-$, ${NO_3}^-$ and ${SO_4}^{2-}$), and 22 elemental species. Haze phenomena was observed during approximately 29%(10 times) of the whole sampling period(35 days), resulting in highly elevated concentrations of $PM_{2.5}$ and its chemical components. An Asian dust event was also observed, during which $PM_{2.5}$ concentration was 64.5 ${\mu}g/m^2$. Crustal materials during Asian dust event contributed 26.6% to the $PM_{2.5}$, while lowest contribution(5.1%) was from the haze events. OC/EC and WSOC/OC ratios were found to be higher during haze days than during other sampling days, reflecting an enhanced secondary organic aerosol production under the haze conditions. For an Asian dust event, enhanced concentrations of OC and secondary inorganic components were also found, suggesting the further atmospheric processing of precursor gases during transport of air mass to the sampling site. Correlations among WSOC, EC, ${NO_3}^-$, ${SO_4}^{2-}$, and primary and secondary OC fractions, which were predicted from EC tracer method, suggests that the observed WSOC could be formed from similar formation processes as those of secondary organic aerosol, ${NO_3}^-$ and ${SO_4}^{2-}$. Results from principal component analysis indicate also that the observed WSOC was strongly associated with formation routes of the secondary organic and inorganic aerosols.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.1
• /
• pp.76-83
• /
• 2013

Polymer electrolyte membrane fuel cells (PEMFCs) are regarded as a promising alternative to replace the existing automotive power sources. To get high performance and long-term durability for PEMFC systems, novel water management is essential. To this end, a comprehensive understanding of dynamics of the liquid water droplets within an operating PEMFC plays an important role. In this work, direct visualization of dynamic behaviors of the water droplet in the ex situ unit flow channel of a PEMFC including gas diffusion layer (GDL) is carried out as one of the fundamental studies for novel water management. Water droplet dynamics such as the movement and growth of liquid water droplets are mainly presented. Effects of GDL characteristics and inlet air flow rate on the water droplet transport and its removal from the flow channel are also discussed. The data obtained in this study can contribute to build up the fundamental operating strategy including balanced water removal capacity for automotive PEMFC systems.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.4
• /
• pp.231-237
• /
• 2018

In this study, two important requirements for the home production of a robot to detect and remove improvised explosive devices (IEDs) are presented in terms of the total cost for robot system development and the performance improvement of the mine detection technology. Firstly, cost analyses were performed in order to provide a reasonable solution following an engineering estimate method. As a result, the total cost for a mass production system without the mine detection system was estimated to be approximately 396 million won. For the case including the mine detection system, the total cost was estimated to be approximately 411 million won, in which labor costs and overhead charges were slightly increased and the material costs for the mine detection system were negligible. Secondly, a method for fabricating the carbon nanotube (CNT) based gas detection sensor was studied. The detection electrodes were formed by a photolithography process using a photosensitive CNT paste. As a result, this method was shown to be a scalable and expandable technology for producing excellent mine detection sensors. In particular, it was found that surface treatments by using adhesive taping or ion beam bombardment methods are effective for exposing the CNTs to the ambient air environment. Fowler-Nordheim (F-N) plots were obtained from the electron-emission characteristics of the surface treated CNT paste. The F-N plot suggests that sufficient electrons are available for transport between CNT surfaces and chemical molecules, which will make an effective chemiresistive sensor for the advanced IED detection system.