• 제목/요약/키워드: Air pressure in a tunnel

검색결과 186건 처리시간 0.022초

폐쇄형 풍동 시험부내의 진동하는 익형 주위 유동에 대한 비정상 벽면효과 연구 (UNSTEADY WALL INTERFERENCE EFFECT ON FLOWS AROUND AN OSCILLATING AIRFOIL IN CLOSED TEST-SECTION WIND TUNNELS)

  • 강승희;권오준;홍승규
    • 한국전산유체공학회지
    • /
    • 제10권2호
    • /
    • pp.60-68
    • /
    • 2005
  • For study on the unsteady wall interference effect, flows around a forced oscillating airfoil in closed test-section wind tunnels have been numerically investigated by solving compressible Navier-Stokes equations. The numerical scheme is based on a node-based finite-volume method with the Roe's flux-difference splitting and an implicit time-integration method coupled with dual time-step sub-iteration. The Spalart-Allmaras one-equation model is employed for the turbulence effect. The computed results of the oscillating airfoil having a thin wake showed that the lift curve slope is increased and the magnitude of hysteresis loop is reduced by the interference effects. Since the vortex around the airfoil is generated and convected downstream faster than the free-air condition, the phase of lift, drag and pitching moment coefficients was shifted. The pressure on the test section wall shows harmonic terms having the oscillating frequency contained in the wail effect.

Rain-wind induced vibration of inclined stay cables -Part I: Experimental investigation and physical explanation

  • Cosentino, Nicola;Flamand, Olivier;Ceccoli, Claudio
    • Wind and Structures
    • /
    • 제6권6호
    • /
    • pp.471-484
    • /
    • 2003
  • The rain-wind induced vibration of stays is a phenomenon discovered recently and not well explained yet. As it is influenced by a wide range of physical parameters (cable size and shape, wind speed, direction and turbulence, rain intensity, material repellency and roughness, cable weight, damping and pre-strain), this peculiar phenomenon is difficult to reproduce in laboratory controlled conditions. A successful wind tunnel experimental campaign, in which some basic physical quantities were measured, allowed an extensive analysis as to identify the parameters of the rain-wind induced excitation. The unsteady pressure field and water thickness around a cable model were measured under rainy-excited conditions. The knowledge of those parameters provided helpful information about the air-flow around the cable and allowed to clarify the physical phenomenon which produces the excitation.

유동안정성 및 유동소음을 고려한 판토그라프 팬헤드 단면의 강건설계 (Robust Design of Pantograph Panhead Sections Considering Aerodynamic Stability and Noise)

  • 조운기;이종수
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 추계학술대회논문집 II
    • /
    • pp.1235-1241
    • /
    • 2001
  • Pantograph design process must be considered in terms of stability of aerodynamics and reduction of aeroacoustics. Furthermore Pantograph needs to be insensible to severe circumstance condition like typhoon, tunnel, a change of season. In this paper, robust design of panhead sections is conducted based on the Taguchi's design of experiment method. In the aeroacoustic noise analysis, an acoustic analogy using the Ffowcs Williams and Hawkings (FW-H) equation is used to calculate the flow induced sound pressure level. From the near-field CFD analysis data, the far-field noise is predicted at the positions of 25m away from panhead contact strips. Based on aerodynamic (CFD) and aeroacoustic (FW-H) analysis data, the optimal sizing and positioning ofpanhead elements are determined using robust design optimization method. Design parameters such as thickness, length and radius are controllable factors, while outdoor air temperature and atmospheric pressure are considered as uncontrollable factors in the context of Taguchi's approach. A number of CFD simulation and aeroacoustic analysis are performed based on orthogonal arrays. Using a parameter design procedure associated with signal-to-noise (SIN) ratio and sensitivity analysis, an optimal level of design parameters are extracted to minimize the disconnection ratio between contact strips and catenary system, and reduce the far-field aeroacoustic noise.

  • PDF

5678 서울도시철도 지하역사의 라돈 관리 현황 (Current Status of Radon Management in the 5678 Seoul Metropolitan Rapid Transit Subway)

  • 김준현;윤현식;서강진;우희영;김만화;박종헌
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 춘계학술대회 논문집
    • /
    • pp.1306-1312
    • /
    • 2011
  • Underground Subway station's air pollutants are introduced from the indoor or outdoor. And Radon is a major pollutant in the subway station. Radioactive substances Radon is occuring naturally in granite tunnel wall and underground water. Especially inert gas Radon that causes lung cancer in human is anywhere but 5678 S.M.R.T. tunnels deep and pass through the granite plaque have a lot of Radon. The Radon concentration is determined by the following reasons : radon content of soil and concrete, underground water, ventilation, pressure difference, building structure, temperature, etc. So Radon concentration is hard to predict. And we can't only ventilate owing to era of high oil prices. This study focuses on our efforts for the reduction of Radon concentration. And the purpose is to provide basically datas of specially managed 15 subway station's Radon concentration.

  • PDF

한랭지역에서 운영 중인 터널의 누수처리를 위한 유도배수시스템의 장기 성능 평가 (Long-term performance of drainage system for leakage treatment of tunnel operating in cold region)

  • 김동규
    • 한국터널지하공간학회 논문집
    • /
    • 제20권6호
    • /
    • pp.1177-1192
    • /
    • 2018
  • 본 연구의 목적은 한랭지역에서 운영 중인 터널구조물의 누수를 유도배수하기 위하여 기존 유도배수시스템을 향상시키는 것이다. 유도배수시스템은 유도배수판, 방수재료인 Hotty-gel, Hotty-gel 돌출 방지판, 공압타카, 고정핀, 집수관, 유도배수관, 철망 및 뿜어 붙임 모르타르로 구성되어 있다. 유도배수시스템은 현장 적용성 및 시공성을 평가하기 위하여 재래식 콘크리트 라이닝 터널에서 시험 시공되었다. 재령 7일, 14일, 21일, 28일, 2개월, 3개월, 4개월, 5개월, 6개월, 7개월 및 8개월에 약 1,000 ml의 붉은색 물을 유도배수시스템 배면에 주입하여 유도배수시스템의 방수과 유도배수 성능을 평가하였다. 현장 성능 평가 실험이 진행된 8개월 동안 터널이 위치한 지역의 일일 평균 온도는 $-16.0~25.6^{\circ}C$로 측정되었고, 일일 최저 온도는 $-21.3^{\circ}C$, 일일 최고 온도는 $30.8^{\circ}C$였다. 유도배수시스템의 유도배수판에서는 누수가 발생하지 않았지만 재령 14일부터 유도배수관에서 누수가 발생하였다. 유도배수관 누수는 고압의 공압타카와 고정핀 사용으로 두께 0.2 cm인 연성플라스틱 재질의 유도배수관이 변형되었고, 누수 방지를 위한 Hotty-gel의 두께와 폭이 충분하지 않아서 발생한 것으로 판단된다.

경사 분사에 의한 초음속 유동 연료-공기 혼합에 관한 실험적 연구 (Experimental Study on Fuel/Air Mixing using Inclined Injection in Supersonic Flow)

  • 이동주;정은주;김채형;정인석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년도 제30회 춘계학술대회논문집
    • /
    • pp.281-284
    • /
    • 2008
  • 스크램제트 엔진의 연소기 내부 유동은 초음속이므로 유동의 잔류시간과 혼합율의 증대가 효과적인 연소를 가능하게 하는 주요 요인으로 작용한다. 본 연구에서는 연료-공기 혼합기로써 개방형 공동 모델을 사용하였고, 공동 앞에서의 경사 연료 분사 시 분사구 주위와 공동 주위의 유동특성을 살펴보기 위하여 레이저 슐리렌 기법과 압력측정을 실시하였다. 레이저 슐리렌은 10 ns의 광원 지속시간으로 공동 부근의 비정상 유동 현상을 효과적으로 관찰 할 수 있었다. 또한, 압력측정은 연료 분사 J(운동량비)를 변화시켜 가며 측정하였으며, 운동량비에 따른 연소기 내부 주요 연소발생 지점의 변화를 살펴 볼 수 있었다.

  • PDF

원심형 송풍기에 있어서 전향익과 후향익에 따른 성능 특성에 관한 연구 (Study on Characteristics of Performance according to Backward and Forward Blades in Centrifugal Blower)

  • 김재원;박진원
    • 한국전산유체공학회지
    • /
    • 제9권1호
    • /
    • pp.10-17
    • /
    • 2004
  • Comprehensive investigation according to the two kinds of blades is systematically carried out for a design of the centrifugal blower. The motivation of this work is due to demand of enhanced flow rate with higher inlet pressure, such as air purifiers adopting several filters. It is observed that flow rate of the blower with forward blades is larger than that of the system with backward blades. The reason is due to larger outlet velocity from the rotating forward blades and the tendency is validated by a parallel experiment with a wind tunnel. Numerical analysis for the blower system shows detail information between the blades and inside the casing. A series of figures to show the flow details offers deep understanding of a centrifugal blower with the two different blades.

CFD를 이용한 선박용 IGG Blower 개발에 관한 연구 (A Study on the Development of 3rd Stage IGG Blower for Shipbuilding Using CFD)

  • 이종진;이중섭;정순재;장성철;김치원
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.1309-1314
    • /
    • 2008
  • I.G.G is abbreviation for Inert Gas Generator, High temperature in Cargo Tank it desulfurize, exhausted and froze the gas that combined brimstone element and soot, then supply Inert gas by blower, and mack tank inside incombustible range this is equipment that nip in the bud the explosion. The blower for suppling inactivated gas has big impeller with heavy weight to achieve the high pressure, it causes a delay for first operation time and too much load is delivered to motor, total destruction by fire of motor is happening frequently. On this research, we will reduce the size & weight of impeller and install it with several stage, it makes an effect for reducing the first operation time. We also intend to contribute to efficient IGG blower design by research a flowing & pressure specialty from the diameter of impeller, number of blade, and size of casing.

  • PDF

충격파가 초음속 수소-공기 화염의 안정한계에 미치는 영향 (Measured Effect of Shock Wave on the Stability Limits of Supersonic Hydrogen-Air Flames)

  • Hwanil Huh
    • 한국추진공학회지
    • /
    • 제3권1호
    • /
    • pp.86-94
    • /
    • 1999
  • 충격파가 초음속 수소-공기 제트화염의 화염 안정한계에 미치는 영향을 충격파의 강도와 위치를 변화시키면서 연구하였다. 이러한 목적으로 마하수 2.5의 초음속 연소기 벽면에 쐐기를 부착시켜 경사 충격파를 발생시켰다. 본 실험은 충격파가 초음속 화염에 미치는 영향을 연구한 최초의 실험연구이다. 쉬릴렌 가시화 사진과 벽면 정압, 화염 안정 한계를 측정하였으며 충격파가 없는 경우와 비교하였다. 보염 재순환 영역에 충격파를 적절히 간섭시킴으로써 화염 안정 한계가 대폭 개선되었다. 화염 안정한계가 대폭 향상된 이유는 충격파에 의해 발생한 역압력구배로 화염안정화에 중요한 아음속 재순환 영역의 크기가 증대된 때문으로 여겨진다.

  • PDF

超音速 노즐흐름에 있어서 凝縮이 傾斜衝擊波에 미치는 影響 (Effects of supersonic condensing nozzle flow on oblique shock wave)

  • 강창수;권순범
    • 대한기계학회논문집
    • /
    • 제13권3호
    • /
    • pp.547-553
    • /
    • 1989
  • 본 연구에서는 작동유체로서 수증기와 거동이 유사한 습공기를 대기 흡입식 풍동을 사용하여 원호 노즐로서 팽창시키는 경우에 대하여 응축충격파가 발생하는 흐름이 측정부내에 쐐기를 설치하여 발생시킨 경사충격파에 미치는 영향에 대해 실험적으로 조사하였다.