• 한국의류산업학회지
• /
• 제1권2호
• /
• pp.160-165
• /
• 1999

The thermal properies of the pure linen fabrics available in the market and linen blended woven fabrics were measured at the moisture content of 0%, 20%, 40% and 60% using KES-F7 system (Thermo Iabo II type). The experimental properties were statistically analyzed by the rate of water absorbent. The main results were as follows; There is a positive correlation between the thermal insulation value (TIV) and thickness of pure linen fabrics and linen blended woven fabrics by water absorption. Whereas an negative correlation exists between the TIV and cover factor. There is a high positive correlation among the thermal conductivity (k), thickness and weight of pure linen fabrics and linen blended woven fabrics by water absorption. Wherase a high negative correlation exist between the k and air' permeability (Ap). There is a high positive correlation between the feeling of warmth/coldness and bulk density of pure linen and linen blended woven fabrics by water absorption. Wherase a high negative correlation exists between the feeling of warmth/coldness and porosity. There is a negative correlation between TIV and $q_{max}$ of pure linen fabrics and linen blended woven fabrics. The higher the rate of water absorbent, the lower the TIV. This means that TIV decreases by water absorption. As for the thermal property by rate of water absorbent $q_{max}$ and k increase by water absorption and reach max-value at 60% rate of water absorbent. The TIV decreases by water absorption and has +value at 0% rate of water absorbent, whereas it has -value with a feeling of coldness at 20%, 40%. and 60% rate of water absorbent.

• 한국자기학회지
• /
• 제16권5호
• /
• pp.255-260
• /
• 2006

기본조성 $(Ni_{0.35}Cu_{0.2}Zn_{0.45})_{1.02}(Fe_2O_3)_{0.98}$과 NiO 비율을 증가시키고 ZnO을 감소시킨 또 다른 기본조성 $(Ni_{0.4}Cu_{0.2}Zn_{0.4})_{1.02}(Fe_2O_3)_{0.98}$에 grain boundary의 높은 저항층을 형성하고 flux로서 사용하기 위해서 0.1 mol% $CaCO_3$와 입자의 성장을 촉진시켜 낮은 손실, 높은 투자율을 얻기 위한 목적으로 $V_2O_5$를 0.03mo1% 첨가하였다. 이들 원료들을 혼합한 후 $600^{\circ}C$에서 2시간 동안 가소시킨 분말을 toroid 시편으로 만들어 소결온도 $1,050^{\circ}C,\;1,070^{\circ}C,\;1,100^{\circ}C$에서 각각 2시간 동안 공기 중에서 소결하였다. 각 시편들에 대한 밀도는 $4.90{\sim}5.10g/cm^3$으로 나타났고, 각 시편들의 고유저항은 $10^8{\sim}10^{12}{\Omega}-cm$으로 측정되었으며, 결정립의 크기는 대략 $3.0{\sim}8.0{\mu}m$이었다. 시편들의 자기유도 특성 값이 대부분 우수하게 나타났으며, 그 중에서도 기본조성 $(Ni_{0.4}Cu_{0.2}Zn_{0.4})_{1.02}(Fe_2O_3)_{0.98}$에 $CaCO_3$와 $V_2O_5$를 첨가하고 $1,070^{\circ}C$에서 소결한 시편의 특성 값이 잔류자기유도 1,660 G, 최대자기유도 4,000 G로 약간 더 우수하게 측정되었으며, 각각 시편들의 보자력은 $0.15{\sim}0.25\;Oe$로 전형적인 연자성 재료의 범위로 나타났다. 초투자율, 손실계수, 및 큐리온도는 각각 $2,948{\sim}2,997,\;171{\sim}208,\;191{\sim}202^{\circ}C$로 나타나 Ni-Zn ferrite에서 측정되는 값들과 대동소이했다. 물리적인 특성값(고유저항, 자기유도, 초투자율, 손실계수, 큐리온도 등)으로 미루어보아 각종 microwave 통신기기 core 및 고 투자율 deflection yoke core 등으로 사용이 가능하다.

• 멤브레인
• /
• 제7권1호
• /
• pp.22-30
• /
• 1997

Porous asymmetric membranes were prepared from polyetherimide polymer by the phase-inversion technique under different conditions. The performance of the membranes was tested for the removal of acetone vapour from nitrogen. A membrane which showed a high acetone permeability and a high selectivity was chosen and tested further for the separation of different organic vapours from nitrogen. The molecular structure of organic vapours and the selectivity were correlated. A strong correlation was also found between the chromatographic retention time of the organic vapour and the selectivity. These experimental results led to the conclusion that the sorption is the factor governing the separation of volatile organic compounds from nitrogen. A membrane was also prepared by coating the surface of a porous polyetherimide membrane with silicone rubber. The performance of membranes with and without silicone rubber coating was compared.

• 조명전기설비학회논문지
• /
• 제28권12호
• /
• pp.55-64
• /
• 2014

This paper presents a case study to investigate the monthly calculation method of ISO 13790 applied for a office building. The energy performance analysis according to improvement of insulation and air permeability of windows in K office buildings is investigated by means of building energy efficiency rating tool ($ECO_2-OD$). The K building energy system is tested experimently by the measurement of PMV(predicted mean vote) for the control of indoor thermal environment and heat transmission coefficient of windows and interior walls respectively, before and after the example K office building is remodeled passively. Therefore, Internet based energy assessment program of energy efficiency rating of office building can be applied as a program for the annual energy requirement and for evaluation of energy savings from the experimental and simulation results.

• 대한가정학회지
• /
• 제38권11호
• /
• pp.105-114
• /
• 2000

The purpose of this study was to investigate the wearing satisfaction of highschool girls’summer uniforms, and to evaluate the comfort-related properties of fabrics used in the uniforms. The subjects were 441 female high school students attending three different schools in Chongju city. The data was collected using self-administered questionnaires to measure the wearing satisfaction of summer school uniforms. Factor analysis, t-test, and F-test were used for data analysis. The heat and moisture transfer properties and air permeable properties of their fabrics were evaluated to measure as comfort-related properties. 1. Most students were wearing blouses made of polyester/rayon blended fabrics and skirts made of 50% wool and 50% polyester blended fabrics. 2. Clothing care and management, and appearance of summer school uniform were assessed positively, while style and design, and the level of comfort were assessed negatively. 3. The subfactors of wearing satisfaction varied according to school, style and design, and fabrics of high school girls’summer uniforms. 4. PET fabrics were rated as having a lower value of thermal retention and a higher value of air permeability than other blouse fabrics. 5. There were not differences significantly in thermal properties according to skirt materials.

• 한국식품저장유통학회지
• /
• 제5권3호
• /
• pp.239-246
• /
• 1998

폴리이미드 고분자막을 사용한 질소부하 장치를 설계하고, 이를 CA 저장에 활용하기 위한 기술적 기본 데이터를 제시하였다. 순수 산소 및 질소의 투과특성은 dual-mode sorption 모델로서 설명될 수 있었으며, 공기 중의 산소의 투과율은 공기 중에 존재하는 질소의 영향으로 순수 산소의 투과율에 비해 크게 감소하나, 공기 중의 질소의 투과율은 산소의 영향으로 순수 질소의 투과율에 비해 증가하였다. 수행한 압력 및 온도 범위 내에서 이상분리인자는 5에서 6 사이의 값을 나타내었으며, 공기의 분리인자는 이상분리인자보다 작은 값을 나타내었다. 산소의 투과활성화에너지가 질소의 투과 활성화에너지보다 커서 이상분리인자는 온도가 증가함에 따라 증가하였다. 제품회수율이 증가함에 따라 농축부의 질소농도는 급격히 감소하였으며, 이로부터 제품회수율은 CA 저장고에서 요구되는 질소농도를 얻기 위한 주요 조업인자임을 알 수 있었다. Polyimide 막 시스템을 이용한 CA 저장 공정의 가상적인 모형을 설정하고, 시스템의 조업시간에 따른 저장고의 질소농도를 예측할 수 있는 관계식을 제시하였다.

• 한국지반공학회논문집
• /
• 제20권1호
• /
• pp.109-120
• /
• 2004

불포화지반에서 발생되는 부 간극수압은 함수비 변화에 따라 비선형적인 거동을 보이며, 이 관계를 흙-수분 특성곡선(soil-water characteristic curve)이라고 정의한다. 현재까지 우리나라의 흙에 대한 흙-수분 특성의 연구결과는 거의 전무한 실정이기 때문에 불포화 지반의 응력해석 및 침투해석 시, 마땅히 입력할 계수나 특성값이 없다. 본 연구에서는 준설매립지반의 주요 토사인 준설토와 모래, 그리고 복토재로 사용되는 화강풍화토에 대한 흙수분 특성시험을 실시하여 흙-수분 특성을 규명하였으며, 해석적 검증을 통하여 불포화 지반의 응력해석 및 침투해석 시 필요한 계수를 분석하였다. 또한, 입도분포곡선으로부터 흙수분 특성곡선 예측모델을 적용하고 흙수분 특성시험 결과와 비교 검토하였다. 흙-수분 특성시험결과, 세 가지 시료 모두 뚜렷한 히스테리시스 현상을 나타내었으며, 기존에 제안된 경험방정식에 실험결과를 적용한 결과 Fredlund and Xing의 경험방정식은 세 가지 시료 모두에 대하여 높은 정확도를 나타내었다. 한편, 입도분포를 이용한 예측모델은 Fredlund and Wilson의 방법이 가장 높은 정확도를 나타내었다. 흙-수분 특성시험결과와 다양한 예측모델을 통하여 불포화 투수계수를 예측하여 상호 비교한 결과, 모래와 화강풍화토는 Fredlund and Wilson의 방법, 준설토는 Arya and Paris의 예측모델이 높은 정확도를 나타내었다.

• 한국의류산업학회지
• /
• 제15권3호
• /
• pp.452-460
• /
• 2013

This study conducted a performance evaluation of protective clothing materials used for welding in a hazardous shipbuilding industry work environment. The welding process was selected as the one that most requires industrial protective clothing according to work environment characteristics. Flame proofing and convection heat protection performance (HTI) in the heat transfer characteristics of protective clothing material were indicated in the order of SW1(Oxidant carbon)>SW2(silica coated Oxidant carbon)>SW4(Oxidant carbon/p-aramid)>SW3(flame proofing cotton). However, radiant heat protection performance (RHTI) and the heat transfer factor (TF) were indicated in the order of SW1>SW4>SW2>SW3 and showed different patterns from the convection heat protection performance. SW1 showed superior air permeability and water vapor permeability. The tensile strength and tear strength of welding protective clothing material were indicated in the order of SW4>SW2>SW3>SW1 and showed that a blend fabric of p-aramid was the most superior for the mechanical properties of SW4. SW1 had excellent heat transfer properties in yet met the minimum performance requirements of tensile strength proved to be inappropriate as being a material for welding protective clothing. The abrasion resistance of woven fabric proved superior compared to nonwoven fabric; however, seam strength and dimensional change both met the minimum performance requirements and indicated that all samples appeared non-hazardous. Finally, oxidant carbon/p-aramid blend fabric appeared appropriate as a protective clothing materials for welding.

• 한국의류학회지
• /
• 제20권1호
• /
• pp.228-238
• /
• 1996

The purpose of this study was to evaluate the effect of chacteristics of knit fabrics on the microclimate of the skin simulating system. To determine the effect of characteristics of knit fabrics, vapor state of sweat pulse was simulated in the closed system. Different contents of fibers such as cotton, wool and polyester with different yarn size and knit types were chosen for specimens. The changes of humidity and temperature of air layer in the simulated systems were measured. Buffering indices, $K_d$ and $\beta_r$, were determined by considering $\alpha_p, \DeltaP_{max}, t_{max}, and tan\beta$. Physical properties of knit fabrics such as thickness, porosity, air resistance and moisture vapor transport were measured. Results showed that vapor pressure of wool was lower than cotton or polyester This was attributed to the hydrophilicity of wool which absorbed moisture rather quickly and retained in the knit fabric. The time to decrease vapor pressure was faster for polyester than cotton or wool. As a result, $K_d$ was in the order of wool> polye, item> cotton. $\beta_r$ of wool was rower than cotton or polyester due to its lowers porosity and slower desorption rate. For the yarn size, $K_d$ was in the order of 80's> 60's> 30's; thinner and lighter yarn showed better water vapor transport property. For knit type, buffering capacity of single jersey was better than interlock knit fabric. Statistical analysis showed that the air permeability was the most influential factor far the water vapor transport properties.

• 한국지반신소재학회논문집
• /
• 제6권3호
• /
• pp.9-16
• /
• 2007

토양증기추출공법(SVE)은 불포화 지반상태에서 휘발성 유기화합물(VOCs)과 유류오염 물질을 제거하는데 효과적이고 경제적인 공법중의 하나이다. 본 연구에서는 기존 연약지반의 지반개량시 사용된 연직배수재(PVDs)를 토양증기추출시스템에 적용하여 짧은 공기배출거리로 최대한 신속하게 오염물질을 제거할 수 있게 하여 투기계수가 낮은 지반에서 오염된 토양을 효과적으로 복원할 수 있는 토양증기추출공법을 적용하는데 목적이 있다. 연직배수재를 이용한 토양증기추출시스템 적용시 실제 현장에서 나타나는 무한 경계 조건을 만족하기 위해서 실내에서 파일럿 규모의 오염복원 모형실험을 결과로 유한경계조건 시스템에서 이미지웰 중첩이론을 이용하여 압력분포를 가정하였다. 즉, 압력강하가 없는 일정수두 경계조건 상태와 토조의 상 하부와 같이 흐름이 없는 불투수경계조건 상태를 유지하기 위해서 이미지웰 중첩이론을 도입하여 경계조건을 수립하였다. 결과, 공기흐름률이 증가할수록 흐름비율도 증가하였다. 따라서 높은 흐름률에 대한 흐름비율도 더 커지게 되는 것이고, 최적화과정동안 공기흐름률은 측정 압력수두와 이미지웰 중첩이론으로부터 구해진 이론 압력수두의 오차율에 미치는 가장 중요한 인자로 판단된다.