• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.4 no.3
• /
• pp.139-148
• /
• 2000

A mass balance/photochemical modeling approach was used to evaluate the sea-to-air dimethyl sulfide (DMS) fluxes in tropical regions and part of the Southern Ocean. The flux determinations were based on 10 airborne observations by ACE 1 transit flights (i.e., Flights 4-9 and 29-32). The DMS flux values for the tropical regions ranged from 1.0 to 7.4 $\mu$mole/$m^2$/day with an average estimate of 4.2$\pm$2.3 $\mu$mole/$m^2$/day. The seasonal variations in the DMS flux predicted for the equatorial Pacific Ocean based on atmospheric DMS measurements were not entirely consistent with those derived from seawater DMS measurements were not entirely consistent with those derived from seawater DMS measurements reported in previous literature. Inhomogeneities in the DMS flux field were found to cause significant shifts in the atmospheric DMS levels even in the same sampling location. Accordingly, no definitive statement can be made at this stage regarding systematic differences or agreements in the DMS flux estimates from the two approaches. Moreover, this study strongly suggests that DMS oxidation is the most likely dominant source of SO$_2$in tropical regions, which is also supported by another set of compiled observations. Finally, these SO$_2$observations indicate that, when significant data was available for both the boundary and buffer layers, the vertical SO$_2$gradient between these two zones was primarily negative.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.4
• /
• pp.1305-1310
• /
• 2012

Breast cancer cells undergo transformation when they spread into surrounding tissues. Studies have shown that cancer cells undergo surface alterations and interact with the surrounding microenvironment during the invasion process. The aim of the present study was to analyse these cancer cell surface alterations and interactions of cancer cells and stroma. Twenty 1-methyl-1-nitrosourea-induced breast cancer samples taken from five rats were fixed in McDowell-Trump fixative and then washed in 0.1 M phosphate buffer. The samples were then treated with osmium tetroxide before being washed in distilled water and subsequently dehydrated through graded ethanols. The dehydrated samples were immersed in hexamethyldisilazane (HMDS), then following removal of excess HMDS, the samples were air dried at room temperature in a dessicator. The dried samples were mounted onto specimen stubs and coated with gold coater before being viewed under a scanning electron microscope. We detected the presence of membrane ruffles on the surface of cancer cells and the formation of unique surface membrane protrusions to enhance movement and adhesion to the surrounding stroma during the process of invasion. Advancing cancer cells demonstrated formation of lamellipodia and invadopodia. The stroma at the advancing edge was desmoplastic with many collagen fibres laid down near the cancer cells. Our data suggest that all of these abnormalities could act as hallmarks of invasiveness for breast cancer.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.111-120
• /
• 2000

Recently, metal oxide films such as MgO or ZrO$_2$ have been studied as buffer layers to fabricate the superconductor with preferred orientation and as diffusion barriers to prevent the reaction between superconductor and metal substrate. In this research, we focused fabrication and characterization of MgO and ZrO$_2$ films on textured metal substrates. We fabricated MgO and ZrO$_2$ films on the Ni metal sheets by sol-gel dipping method. The microstrcures of the films were investigated by SEM and AES analyses. The films were coated with different cycles and dryed at 400$^{\circ}$C and 500$^{\circ}$C . The final films were heat-treated at 700$^{\circ}$C, 800$^{\circ}$C, and 1000$^{\circ}$C, in air atmosphere. We investigated the alignment of MgO and ZrO$_2$ films on Ni metal sheets by XRD and pole figure. The grain growth of metal oxide films was improved by the increase of the drying temperature and annealing temperature. The grain growth was increased with the annealing temperature. The alignment of metal oxide films depended on the thickness.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.238-239
• /
• 2010

Dimethyl sulphoxide (DMSO) is one of the widely-used secondary dopants in order to enhance the conductivity of poly(3, 4-ethylenedioxy-thiophene):poly(styrene sulfonate) (PEDOT:PSS) film. In this work, we investigated the effect of DMSO doping in to PEDOT:PSS on the electrical performance of the bulk heterojunction photovoltaics consisting of poly(3-hexylthiophene-2, 5-diyl) and phenyl-C61-butyric acid methyl ester. Correlation between the power conversion efficiency and the mechanism of improving conductivity, surface morphology, and contact properties was examined. The PEDOT:PSS films, which contain different concentration of DMSO, have been prepared and annealed at different annealing temperatures. The mixture of DMSO and PEDOT:PSS was prepared with a ratio of 1%, 5%, 15%, 25%, 35%, 45%, 55% by volume of DMSO, respectively. The DMSO-contained PEDOT:PSS solutions were stirred for 1hr at $40^{\circ}C$, then spin-coated on the ultra-sonicated glass. The spin-coated films were baked for 10min at $65^{\circ}C$, $85^{\circ}C$, and $120^{\circ}C$ in air. In order to investigate the electrical performance, P3HT:PCBM blended film was deposited with thickness of 150nm on DMSO-doped PEDOT:PSS layer. After depositing 100nm of Al, the device was post-annealed for 30min at $120^{\circ}C$ in vacuum. The fabricated cells, in this study, have been characterized by using several techniques such as UV-Visible spectrum, 4-point probe, J-V characteristics, and atomic force microscopy (AFM). The power conversion efficiency (AM 1.5G conditions) was increased from 0.91% to 2.35% by tuning DMSO doping ratio and annealing temperature. It is believed that the improved power conversion efficiency of the photovoltaics is attributed to the increased conductivity, leading to increasing short-circuit current in DMSO-doped PEDOT:PSS layer.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.2
• /
• pp.121-126
• /
• 1998

The solubility and physicochemical stability of caroverine hydrochloride (CRV), an antispasmodic, in buffered aqueous solutions were studied using a reverse phase high performance liquid chromatography. The solubilty of the drug at pH 2.76-5.40 was similar at the range 31.9-36.2 mg/ml $(34^{circ}C)$, but, at the pH higher than 6.0, markedly decreased. The use of polyethylene glycol 400 as a cosolvent did not increase the solubility at any compositions examined. Moreover. increasing molar concentration of aqueous phosphate buffer from 0 to 0.5 M remarkably decreased the solubility. The degradation of CRY followed the apparent first-order kinetics. The degradation was accelerated with decreasing pH and increasing storage temperature. The half-lives for the degradation of CRY (1.0 mg/ml) at pH 1.28. 4.01 and 5.93 $(45^{\circ}C)$ were 2.8, 31.4 and 124 hr. respectively. The pHs of incubated solutions were to some extent lowered perhaps due to the formation of acidic degradation products. The addition of disodium edetate (0.01%) to the CRY solution (pH 4.95) retarded 2.5 times the degradation rate at $45^{\circ}C$, but the use of sodium bisulfite (0.1%) accelerated 2.9 times the rate. The activation energy for the CRY solution (20 mg/ml. pH 5.4) containing 0.01% EDTA was calculated to be 5.98 kcal/mole. When the solution was stored under nitrogen displacement in ampoule, there was no significant degradation even after 3 months at $40^{\circ}C$, indicating that protection from oxidation by air (oxygen) is essential for the complete stabilization of CRY solution.

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.3
• /
• pp.341-349
• /
• 1996

초기배의 성판정은 대상가축의 성을 선발하는 수단으로써 뿐만아니라 인간의 유전적 질병의 조기진단법으로서 매우 가치가 크다. 체외수정 소 초기배의 성을 결정하기 위해 PCR과 PRINS를 이용하였으며 성판정에 이용된 8 세포${\sim)$배반포기 초기배는 체외수정후 난관상피세포와의 공배양에 의해 생산되었다. 초기배 의 DNA는 $200{\mu}g/ml$ proteinase K가 함유된 PCR lysis buffer에 하나의 초기배를 부유한 후 $50^{\circ}C$에서 1시간동안 처리하여 준비하였다. 중기 염색체 spreads는 초기배를 nocodazole로 처리한 후 air-drying 방법을 이용하여 준비하였다. 가능한 false positive signals을 배제하기 위해 소특이 및 Y 염색체 특이 primers를 이용하여 PCR을 수행한 결과, 웅성 초기배에서는 두 개의 증폭산물 (소특이 및 Y 염색체 특이)이 합성된 반면 자성 초기배에서는 하나의 증폭산물만 합성되었다. 한편 중기염색체상의 Y 염색체를 동정하기 위해 FISH와 PRINS를 수행한 결과, FISH에서보다 PRINS에서 더 강한 Y 염색체 특이 형광 signals이 탐지되었다. 이러한 결과는 PCR에 의한 체외생산 소 초기배의 신속정확하고 효율적인 성판정이 가능함을 보여주었다. 또한 PRINS를 통해 PCR 에 이용된 Y 특이 probe의 신뢰성이 염색체 수준에서 확인되었다.

• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.568-579
• /
• 2019

The present study aims to identify the effect of land cover categories on particulate matter (PM) concentrations by analyzing the correlation between monthly PM concentrations in Seoul's air quality monitoring network and the percentages of land cover categories by buffers around air quality monitoring stations. According to a monthly correlation analysis between land cover categories and PM concentrations, in the buffer 3km, PM₁₀ showed a better correlation than PM_2.5, there was a clear negative correlation with the forest area, the grassland and the urbanized area had some positive correlation with PM₁₀, and the barren land and the urbanized area had some positive correlation with PM_2.5. According to a monthly correlation analysis of dominant land cover sub-categories and sub-sub-categories within the buffer 3km, PM₁₀ showed a clear negative correlation with the broad-leaved forest, and some positive correlation with the road was dominant. PM_2.5 showed partly negative correlation with the broad-leaved forest and partly positive correlation with the commercial area. There was a very low or no correlation with other grassland and bare land subcategories. A monthly stepwise regression analysis on noticeable land cover sub-categories and sub-sub-categories with positive or negative correlations revealed that an increasing percentage of the broad-leaved forest had a clear effect on reducing PM₁₀ concentrations, and the road was excluded from the selected variables. Although an increasing percentage of the commercial area had some effect on increasing monthly PM_2.5 concentrations and an increasing percentage of the broad-leaved forest had an effect on decreasing the PM_2.5 concentrations, their effect size was smaller than that on PM₁₀. The forest area around the city center had the largest and clearest effect on reducing PM concentrations. The urbanized area's sub-categories and sub-sub-categories were also confirmed to have some effect on increasing PM concentrations.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.4
• /
• pp.288-295
• /
• 2013

Nitrogen dioxide ($NO_2$) gas damage on vegetable crops commonly occurs in plastic film houses where relatively large amounts of $NO_3{^-}$ are applied in acid soils. In acid soils, $HNO_2$ can be formed from the $NO_2{^-}$ accumulated during denitrification, and $NO_2$ can be evolved from the chemical self-decomposition of $HNO_2$. In this study, $NO_2$ gas production and its detrimental effects on plants were investigated in soils of various conditions to elucidate the mechanisms involved in the gas production. A silty loam soil was amended with $NO_3{^-}$ (500 mg N $kg^{-1}$) and glucose, and pH and moisture of the soil were adjusted respectively to 5.0 and 34.6% water holding capacity (WHC) with 0.01 M phosphate buffer. The soil was placed in a 0.5-L glass jar with strawberry leaf or $NO_2$ gas absorption badge in air space of the jar, and the jar was incubated at $30^{\circ}C$. After 4-5 days of incubation, dark burning was observed along the outside edge of strawberry leaf and $NO_2$ production was confirmed in the air space of jar. However, when the soil was sterilized, $NO_2$ emission was minimal and any visible damage was not found in strawberry leaf. In the soil where water or $NO_3{^-}$ content was reduced to 17.3% WHC or 250 mg N $kg^{-1}$, $NO_2$ production was greatly reduced and toxicity symptom was not found in strawberry leaf. Also in the soil where glucose was not amended, $NO_2$ production was significantly reduced. In soil with pH of 6.5, $NO_2$ was evolved to the level causing damage to strawberry leaf when the soil conditions were favorable for denitrification. However, compared to the soil of pH 5.0, the $NO_2$ production and its damage to plants were much less serious in pH 6.5. Therefore, the production of $NO_2$ damaging plants might be occurred in acid soils when the conditions are favorable for denitrification.

• Microbiology and Biotechnology Letters
• /
• v.40 no.4
• /
• pp.414-418
• /
• 2012

The quantity of research on microbial fuel cells has been rapidly increasing. Microbial fuel cells are unique in their ability to utilize microorganisms and to generate electricity from sewage, pig excrement, and other wastewaters which include organic matter. This system can directly produce electrical energy without an inefficient energy conversion step. However, with MFCs maximum power production is limited by several factors such as activation losses, ohmic losses, and mass transfer losses in cathodes. Therefore, electron acceptors such as nitrate and ferric ion in the cathodes were utilized to improve the cathode reaction rate because the cathode reaction is very important for electricity production. When 100 mM nitrate as an electron acceptor was fed into cathodes, the current in single-cathode and dual-cathode MFCs was noted as $3.24{\pm}0.06$ mA and $4.41{\pm}0.08$ mA, respectively. These values were similar to when air-saturated water was fed into the cathodes. One hundred mM nitrate as an electron acceptor in the cathode compartments did not affect an increase in current generation. However, when ferric ion was used as an electron acceptor the current increased by $6.90{\pm}0.36$ mA and $6.67{\pm}0.33$ mA, in the single-cathode and dual-cathode microbial fuel cells, respectively. These values, in single-cathode and dual-cathode microbial fuel cells, represent an increase of 67.1% and 17.6%, respectively. Furthermore, when supplied with ferric ion without air, the current was higher than that of only air-saturated water. In this study, we attempted to reveal an inexpensive and readily available electron acceptor which can replace platinum in cathodes to improve current generation by increasing the cathode reaction rate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.180-184
• /
• 2003

The intrauterine inseminator (IUI) was developed to provide the method of depositing dog semen into the uterine body instead of the vagina. The IUI consists of a vaginal endoscope, a balloon sheath, and injection catheter. When the endoscope is inserted into the vagina and the balloon expanded with air, the cervical os becomes visible so a injection catheter can be inserted through the cervix for deposition of the frozen-thawed semen. The efficacy of the IUI device was compared to intra-vaginal artificial insemination using semen that had been collected and frozen from pooled sperm-rich fraction of ejaculates collected from two Jindo dog donors. Aliquots of semen were extended with a Tris-egg yolk diluent, centrifuged, the seminal plasma removed, the pellet resuspended with the same diluent, and cooled to $5^{\circ}C$ over a 2 h period. A Tris-egg yolk-glycerol extender was added at $5^{\circ}C$; after 1 h, semen was loaded into 0.5 ml straws, and straws were frozen in LN vapor for 5 min, and immersed in LN for storage. The final sperm concentration for freezing was approximately $100{\times}10^{6}cells/ml$. The straws were thawed at $70^{\circ}C$ for precisely 6 sec, 1.5 ml Tris-egg yolk buffer at $38^{\circ}C$ added, and the 2 ml of thawed semen was used for a single insemination using the IUI device. Each bitch was inseminated at optimal insemination point, which was estimated by vaginal epithelial cells staining and progesterone concentration analysis. Use of the IUI device resulted in 21 of 26 females giving birth to 89 pups ($4.2{\pm}1.6$ pups per litter), while intra-vaginal AI resulted in 6 of 15 females whelping a total of 17 pups ($2.8{\pm}1.2$ pups per litter). We believe the IUI device is easier to use than previously described devices used for intrauterine insemination. In our experience the expansion of the balloon has a calming effect on the bitch that aids the inseminator. These results indicate that the IUI device was able to provide high fertility with 50 million frozen sperm per insemination and two inseminations.