• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.31-36
• /
• 2004

In this paper, fretting wear tests were conducted in air at room temperature (RT) and in water at high temperature and high pressure (HTHP) environment to analyze the wear characteristic. As for the supporting condition between the tube and spring/dimple, the gap of 0.2 mm in air at RT and the normal force of 10 N and the slip of $50\;{\mu}\;m$ in water at HTHP were applied. Four different shapes of spring/dimple specimen (type A, B, C, D) were used. Detail eaxamination of wear scar was also performed using SEM micrographs. As a result, in the case of the spring of truncated wedge, severer wear occurs than the others. Protrusion part was found and larger in air at RT. It is thought that the difference in the wear volume and the protrusion is caused by the different wear mechanism corresponding to the different environment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.203-207
• /
• 2014

According to the advanced study, Increase of ceiling air space could cause increase of floor impact sound by air-spring effect. So in this research, we studied the increase of floor impact sound caused by ceiling air space in apartment buildings. At first, we evaluated the change of floor impact noise in the condition of with or without ceiling air-space. And then we installed perforated ceiling systems and glass wool at ceiling area. we expected that perforated ceiling systems could prevent air-spring effect in ceiling space. As a result, ceiling air space caused increasement of floor heavy impact noise about 2~4dB. But perforated ceiling & sound-absorbing materials system could give us reduction of heavy floor impact noise about 3dB. So this systems could be a good alternative to obey national regulations, because it can reduce heavy impact noise additional to floating floor systems.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.357-362
• /
• 2006

This research focused on the multi-pass heat exchanger using the minichannel possessing the spring fin. An air-water was used as working fluid. The characteristics of liquid single phase heat transfer were verified. The compact heat exchanger (heat transfer area density : ${\beta}=2,146 m^2/m^3$), based on the shape of header(Top combining header), 63 minichannels ($D_i$ : 1.4 mm, L : 0.25 m) and the air side adopting the copper wire spring fin, was fabricated. The heat transfer area density of the air side was improved up to 161% when compared with the conventional fin-tube heat exchanger that adopts the heat transfer tube with the inner diameter of 5 mm. With regard to heat transfer performance, heat transfer rate per unit volume increased up to 142% when compared with the fin-tube heat exchanger adopting the heat transfer tube with the inner diameter of 5 mm.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권2호
• /
• pp.132-139
• /
• 2001

We considered the uniformity of fabricated micromirror arrays by characterizing the fabrication process and calculating the appropriate driving voltages of micromirrors used as virtual photomask in maskless photolithography. The uniformity of the micromirror array in terms of driving voltage and optical characteristics is adversely affected by factors, such as the air gap between the bottom electrode and the mirror plate, the spring shape and the deformation of the mirror plate or torsion spring. The thickness deviation of the photoresist sacrificial layer, the misalignment between mirror plate and bottom electrode, the aluminum deposition condition used to produce the spring and the mirror plate, and initial mirror deflection were identified as key factors. Their importance lies in the fact that they are related to air gap deviations under the mirror plate, asymmetric driving voltages in left and right mirror directions, and the deformation of the Al sring or mirror plate after removal of the sacrificial layer. The plasma ashing conditions used for removing the sacrificial layer also contributed to the deformation of the mirror plate and spring. Driving voltages were calculated for the pixel operation of the micromirror array, and the non-uniform characteristics of fabricated micromirrors were taken into consideration to improve driving performance reliability.

• KSTLE International Journal
• /
• 제3권1호
• /
• pp.68-73
• /
• 2002

A fretting wear experiment in roam temperature air was performed to evaluate the wear mechanism of fuel rod using a fretting wear tester, which has been developed for experimental study, The main focus was to compare the wear behaviors of fuel rod against support springs with different contact contours (i.e. concave and convex). Wear volume, degree or surface hardening and adhesion tendency of wear particle were examined by the surface roughness tester. The result indicated that with a change of contact condition from contact force of 5 N to 0.1 mm gap, the wear volume of tube increased in the condition of concave spring, but slowly decreased in convex spring. From the results of SEM observation, wear mechanism of each test condition was also dependent on the spring shapes. The wear mechanism of each test condition in room temperature air is discussed.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.59-60
• /
• 2003

In this study, we present the analysis of vertical ozone sounding data observed over Pohang, Korea, and investigate to understand the governing mechanisms for seasonal ozone maximum in June. The vertical ozone profiles in June show that the ozone enhancement is clearly shown in the middle and upper troposphere. We have found that the June maximum is associated with the transport of ozone rich air from the stratosphere and polluted continental air mass. This is different from the previous studies shown that the regionally polluted continental air mass, influenced by the intense anthropogenic activities m northeast Asia during transport, is responsible for the ozone maximum in spring.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.216-221
• /
• 2004

The performance of secondary suspension is one of the most important characteristics of railway vehicles in the regard of vibration and riding comfort. For this reason, the suspension shall be designed to absorb vibration energy effectively and to avoid the resonance which would be occurred by the vibration of the bogies in driving. The main factor of characteristics of suspension is spring coefficient of air spring, and this paper shows how to achieve the desired coefficient and the results of the tests of new air springs.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.126-131
• /
• 2007

This study aims to present the fundamental strategies for improving the Indoor Air Quality(IAQ) in newly-constructed apartment buildings. To investigate the concentration of indoor air pollutants such as HCHO and VOCs and the field measurement were conducted. According to the field measurement of 60 new houses in spring season, the concentration of HCHO in about 20% were higher the IAQ standards.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.256-261
• /
• 2004

To evaluate the effect of spring shape on the fretting wear of nuclear fuel rod, sliding wear tests were performed using three kinds of space grid springs in room temperature air and water. With increasing slip amplitude, wear volume of each spring gradually increased. It is apparently shown that spring with convex shape had a relatively high wear resistance compared with concave shape springs. It is suggested that the ratio of the wear volume to the worn area can be suggested as an efficient and valid parameter to evaluate the wear resistibility of a fuel grid spring.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.294-298
• /
• 2008

Snow cover is a potential water resource for later spring and summer seasons as well as a thermal mirror with high reflectivity causing decreases of surface air temperature during cold winter seasons. In this study, current and future changes in Northern Hemisphere snow extent and their potential linkages with atmospheric circulation are examined. The NOAA AVHRR visible snow extent (1967-2006) data as well as observational (NCEP-DOE 1979-2006) and modeled (GFDL 2.1 2081-2100) pressure and surface air temperature data are used. Analyses of observational data demonstrate that the snow extent in meteorological spring (March to April) and summer (June to August) has significantly decreased since the late 1980s. The offset of snow seasons (the timing of snow melt in spring) have also significantly advanced particularly in Europe, East Asia, and northwestern North America. Analyses of pressure fields reveal that the spatial patterns of the earlier snow melt are associated with changes in atmospheric circulation such as the Arctic Oscillation (AO). In the positive winter AO years, multiple positive pressure departure cores in the upper troposphere (200hPa) are observed over the mid-latitude regions from March to mid-April, while a negative pressure departure core (70hPa) prevails over the Arctic Ocean. The reversed anomaly patterns related to later snow melt occur in negative winter AO years. The comparison between current and future thermal spring onsets suggest that snow melt patterns will intensify with larger greenhouse gas emissions, indicating earlier hydrological spring onset.