• Journal of Periodontal and Implant Science
• /
• v.53 no.4
• /
• pp.269-282
• /
• 2023

Purpose: Dental fear hinders patients from receiving appropriate dental treatment. In particular, the noise generated by high-speed air turbines and ultrasonic scalers can adversely affect patients. Many efforts have been made to reduce the discomfort caused by noise, but no methods are definitively recommended. The purpose of this study was to determine the efficacy of active noise-canceling (ANC) headphones in reducing the pain and discomfort associated with dental scaling. Methods: Fifty-five patients requiring scaling and root planing, aged ≥19 years and showing no auditory problems, were included. Scaling was performed for the bilateral maxillary molars and premolars while patients wore headphones, with ANC turned either on or off. The degree of noise and pain reduction in the on and off conditions were surveyed using a visual analog scale (VAS). The Wilcoxon signed-rank test was performed to compare noise-and pain-related discomfort with ANC turned on and off. Results: The sample included 28 men and 27 women with a mean age of 45.45±13.12 years. The average noise-related discomfort score was 3.84±2.12 and 2.95±1.99 when noise-canceling was turned off and on, respectively, with a statistically significant difference (P<0.05). Similarly, the average pain-related discomfort score was 3.78h±2.00 and 3.09±1.96 when noise-canceling was turned off and on, respectively, which was a statistically significant difference (P<0.05). Conclusions: The use of ANC headphones seems to reduce the discomfort caused by noise and pain in patients undergoing scaling.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.1
• /
• pp.1-4
• /
• 2009

Mechanical and electrical properties of silver stabilizer layer of coated conductor, which as prepared with nano silver paste as starting materials, have been investigated, Nano silver paste was coated on a YBCO film by dip coating process at a diping speed of 20m/min. Coated film was dried in air and heat treated at $400{\sim}700^{\circ}C$ in an oxygen atmosphere. Adhesion strength between YBCO and silver layer was measured by a tape est(ASTM D 3359). Hardness and electrical conductivity of the samples were measured by pencil hardness test (ASTM D 3363) and volume resistance test by LORESTA-GP (MITSHUBISHD, respectively. The sample heat-treated at $500^{\circ}C$ showed poor adhesion 1B, but samples heat treated at higher than $600^{\circ}C$ showed enhanced adhesion of 5B. The silver layer heat-treated at $700^{\circ}C$ showed the high hardness value larger than 9 H, low volume resistance, surface resistance value as well as superior current carrying capacity compared to sputtered silver. SEM observations showed that a dense silver layer was formed with a thickness of about $2{\mu}m$. Dip coated silver layer prepared by using nano silver paste showed superior electrical and mechanical characteristics.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.1
• /
• pp.70-86
• /
• 2024

Termites are a serious threat to wood-based products in Indonesia. This study investigated the termite resistant property of glulam made from polystyrene-modified wood. Three tropical fast-growing wood species, namely mangium (Acacia mangium), manii (Maesopsis eminii), and rubberwood (Hevea brasiliensis), were prepared for flat-sawn laminae. After getting air-dried condition, the laminae were impregnated with polystyrene using potassium peroxydisulphate as a catalyst followed by polymerization at 80℃. Polystyrene-impregnated and control glued-laminated lumbers (glulams) were manufactured, and solid wood was provided. Three wood species and three wood products with six replicates were exposed in a field in Bogor, Indonesia, for four months, and before the tests, their density and moisture content were measured. At the end of the field tests, the weight loss and protection levels of each test sample were determined. A completely randomized factorial design was used for data analysis. The weight percentage gains for mangium, manii, and rubberwood were 22.30%, 18.22%, and 10.44%, respectively. The results showed that manii belonged to low-density wood, whereas the other two woods were medium-density wood, and the moisture content was the ambient moisture content, typical of the Bogor area. Regarding weight loss and protection level, mangium was the most durable against subterranean termite attacks, followed by rubberwood and manii. Among the wood products, the polystyrene-impregnated glulam presented the highest durability, followed by the control glulam and solid wood. Therefore, mangium and rubberwood polystyrene-impregnated glulams are recommended for future product development.

• International Journal of Computer Science & Network Security
• /
• v.24 no.7
• /
• pp.73-78
• /
• 2024

The present world is full of challenges and opportunities for the women at work. Every woman works hard for academic growth and professional development. For the same reason they also face challenges every day such as stresses, tensions, problems and competitions. When these factors exceed above the strengths, the capabilities of a woman start drowning under stress. Stress is generally thought negative characteristic, but stress or tension maintained up to some level is necessary and effective towards work done at job. This paper covers the study relationship between job stressor and female teacher's performance. The study was carried out in Government Colleges of District Hyderabad, Pakistan. The teacher student relationship was selected as a stressor for female teachers. The study is descriptive in nature followed by method of correlation. A five point "Likert Scale" was developed to collect the data from the sample size of 158 college teachers drawn randomly and the collected data was assessed quantitatively. The relationship between the "teacher student" (as an indicator of job stress) and "female teachers' performance" was calculated by Pearson Correlation formula. The findings of the study show the significant correlations between the teacher student relationship and job stress in female teachers' performance where it is found that the stressor caused the poor Physical and Mental health of female teachers working in colleges.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.79-93
• /
• 1984

The dissolved air flotation(DAF) has been shown to be efficient process for the removal of algae ftom water. The efficiency of DAF can be affected by the volume ratio of pressurized liquid to sample, the pressure pressurized liquid, the contact time, the appropriate coagulant and its amount, the water temperature, the turbulence of reactor, the bubble size and rising velocity etc. The purpose of this paper is to compare the practical bubble rising velocity with the theoretical one, to investigate the adhesion phenomenon of bubbles and floc, and the influence of bubble size and velocity upon the process. The results through theoretical review and experimental investigation are as follows: Ives' equation is more suitable than Stokes' equation in computation of the bubble rising velocity. The collection of bubble and algae floc is convective collection type and resulted from absorption than adhesion or collision. The treatment efficiency is excellent when the bubble sizes are smaller than $l00{\mu}m$, and the turbulence of reactor is small. In the optimum condition of continuous type DAF the volume ratio of pressurized liquid to sample is 15%, the contact time in reactor is 15 minutes, the pressure of pressurized liquid is $4kg/cm^2$ and the distance from jet needle to inlet is 30cm.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.3
• /
• pp.49-61
• /
• 2019

Swine manure has been recognized as a organic sources for composting and many research was conducted to efficiently utilize and treat. This study was to evaluate a feasibility for producing swine manure compost under various treatment with mixture of swine manure and saw dust. Treatments were designed as follows; non aerated composting pile(REF), aerated composting pile of $100L/m^3$(EXP1), and aerated composting pile of $150L/m^3$(EXP2). The total days of fermentation were 28 days and each samples were collected at every 7 days from starting of composting. Temperature sensors were installed under 30~40cm from the surface of composting pile. Inner temperature in composting piles of EXP1 and EXP2 was rapidly increased to $67{\sim}75^{\circ}C$ within 1~2 days. The elevated temperatures found during the thermophilic phase are essential for rapid degradation of organic materials. While swine manure composted, moisture content, total nitrogen, EC of EXP1, EXP2 in sample at 28 days were lower than those of REF. But, pH and organic matter of EXP1, EXP2 in sample at 28 days were higher than those of REF. After finishing fermentation experiment, maturity was evaluated with germination test. Calculated germination index(GI) at REF, EXP1 and EXP2 were 23.49, 68.50 and 51.81, respectively. The values of germination index were higher at EXP1 and EXP2 which is aerated composting piles than REF which is non aerated composting pile. According to the results, composting process by aerated static pile compost had significant effect on the reduction of required period for composting. Supplying adequate amount of air to compost swine manure will greatly reduce composting period.

• Korean journal of food and cookery science
• /
• v.17 no.4
• /
• pp.359-366
• /
• 2001

This study was performed to analyze the volatile flavor compounds of Eucommia ulmoides leaves as influenced by harvesting time and drying method. Essential oils of fresh, air-dried and freeze-dried leaves of Eucommia ulmoides were extracted by SDE(simultaneous steam distillation and extraction) method using pentane and diethyl ether(1:1), and their volatile flavor compounds were analyzed by GC and GC-MS. Total 51 components, including 10 hydrocarbons, 15 alcohols, 12 aldehydes, 4 ketones, 4 esters and 6 acids were identified in fresh Eucommia ulmoides harvested in July. In fresh samples harvested in September, 15 hydrocarbons, 10 alcohols, 5 aldehydes, 4 ketones, 4 esters and 3 acids were identified. In fresh Eucommia ulmoides, aldehydes(8.25ppm) were the most abundant compounds in July samples and alcohols(18.87ppm) in September ones. Seventy one components, including 21 hydrocarbons, 12 alcohols, 12 aldehydes, 9 ketones, 5 esters, 8 acids and 4 miscellaneous ones were identified in air-dried samples harvested in July. In air-dried samples harvested in September, 10 hydrocarbons, 9 alcohols, 3 aldehydes, 3 ketones, 4 esters, 4 acids and 1 miscellaneous one were identified, and the most abundant compounds in July and September samples were hydrocarbons at 5.06ppm and 15.11ppm, respectively. A total of 41 components, including 13 hydrocarbons, 9 alcohols, 5 aldehydes, 3 ketones, 6 esters and 5 acids were identified in freeze-dried samples harvested in July. Freeze-dried samples harvested in August also contained 41 components but with different types, and the ones of September 26 compounds. In freeze-dried ones, hydrocarbons were the most abundant compounds in July sample and esters in August and September samples.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.19-24
• /
• 2020

In this work, the electrical property of Si-doped β-Ga2O3 was investigated via a post-growth annealing process. The Ga2O3 samples were annealed under air (O-rich) or N2 (O-deficient) ambient at 800~1,200℃ for 30 mins. There was no correlation between the crystalline quality and the electrical conductivity of the films within the experimental conditions explored in this work. However, it was observed the air ambient led to severe degradation of the film's electrical conductivity while N2-annealed samples exhibited improvement in both the carrier concentration and Hall mobility measured at room temperature. Interestingly, the x-ray photoemission spectroscopy (XPS) revealed that both annealing conditions resulted in higher concentration of oxygen vacancy (VO). Although it was a slight increase for the air-annealed sample, high resistivity of the film strongly suggests that VO cannot be a shallow donor in β-Ga2O3. Therefore, the enhancement of the electrical conductivity of N2-annealed samples must be originated from something other than VO. One possibility is the activation of Si. The XPS analysis of N2-annealed samples showed increasing relative peak area of Si 2p associated with SiOx with increasing annealing temperature from 800 to 1,200℃. However, it was unclear whether or not this SiOx was responsible for the improvement as the electrical conductivity quickly degraded above 1,000℃ even under N2 ambient. Furthermore, XPS suggested the concentration of Si actually increased near the surface as opposed to the shift of the binding energy of Si from its initial chemical state to SiOx state. This study illustrates the electrical changes induced by a post-growth thermal annealing process can be utilized to probe the chemical and electrical states of vacancies and dopants for better understanding of the electrical property of Si-doped β-Ga2O3.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.E
• /
• pp.1-17
• /
• 2000

In this study, the concentrations of particulate organic constituents of environmental tobacco smoke(ETS) were determined using an environmental smog chamber, where ETS is the sole source of target compounds. ETS was generated in a 30 ㎥ environmental chamber by a number of different cigarettes, including the Kentucky 1R4F reference cigarette and eight commercial brands. A total of 12 experimental runs was conducted, and target analytes included a group of ETS markers both in vapor and particulate phase and a class of polycylic aromatic hydrocarbos(PAHs) associated with ETS particles. The mass concentrations of PAH in ETS particles were also determined. The average contents of benzo(a) pyrene and benzo(a) anthracene in ETS particles for the commercial brands were 12.8 and 21.5$\mu\textrm{g}$/g, respectively, There values are all somewhat higher than those determined previously by other studies. Results form the chamber study are further used to estimate the average and variability of cigarette yields for target compounds associated with ETS. Finally, ratios of RSP to the surrogate standards of UVPM, FPM and solanesol were calculated for each sample. The average conversion factors factors for the eight commercial brands were 7.3, 38, and 41 for UVPM, EPM, and solanesol, respectively. The UVPM and FPM factors are in good agreement with the recently published values. Whereas there might be a substantial difference in the solanesol content among cigarettes produced in different countries, the variability is somewhat greater than those of UVPM and FPM, Unfortunately, comparison of the PAH yield data from this study with literature values was complicated by a lack of consistency in cigarette smoke generating methodology. Validation of the PAH yields was also difficult due to a lack of information on the ETS related PAH in the literature. From and engineering viewpoint , however, these data on the cigarette yields of ETS components may still provide useful information to studies on the mathematical modeling of indoor air quality management regarding tobacco smoke as a source of interest, or to studies on the assessment of human exposure to ETS.

• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.870-876
• /
• 1994

In order to investigate the growth behavior of $Y_{2}Ba_{1}Cu_{1}O_{5}$(211) particles in $Y_{1}Ba_{2}Cu_{3}O_{7-\delta}$(123), 123 samples were quenched in air after heat treatment on polycrystal and single crystal MgO substrates at $1100^{\circ}C$ for various periods. 211 grains grew with the increase in holding time. The growth of 211 grains was faster on the polycrystal MgO substrate than on the single crystal MgO substrate. In the samples with the compositions of 211+xCuO($0.2\le X \le 0.8$), the growth rate of 211 grains increased with the increase in CuO content. In the sample with x=0.6 the largest 211 grains were observed. 211 grains in the $Y_{2}Ba_{1}Cu_{1.8}Sn_{0.1}O_{5+\delta}$ samples were distributed very finely and homogeneously. The retarding effect of $SnO_2$ addition on the growth of 211 grain appeared more pronounced in a CuO melt than in a $BaCuO_{2}$+ CuO melt.