• Journal of Environmental Science International
• /
• v.23 no.9
• /
• pp.1601-1608
• /
• 2014

Plasma reactor was used for the inactivation of Phytophthora capsici which is phytophthora blight pathogen in aquiculture. Effects of first voltage, second voltage, air flow rate, pH, incubation water concentration were examined. At the low $1^{st}$ voltage, under 80 V, the lag phase was noticed within 30 sec, however, it was not shown over 100 V. The variation of optimum operation condition was not shown by the variation of microorganisms. However, the inactivation rate was different by the variation of species of microorganisms. The inactivation rate and efficiency were increased by the increase of $2^{nd}$ voltage. The highest initial inactivation rate was shown at pH 3 and the rate was decreased by the increase of pH. The inactivation rate increased by the increase of air flow rate, however, it was shown as similar at the rate of 4 L/min and 5 L/min. The inactivation rate was distinctly decreased at the three times concentration of incubation solution comparing at the distilled water and basic incubation solution.

• Journal of Environmental Science International
• /
• v.25 no.7
• /
• pp.905-916
• /
• 2016

The characteristics of phenol removal and $UV_{254}$ matters variance were investigated and compared by the variation of operating factors (NaCl concentration, air flow rate, initial phenol concentration) in electrochemical reaction (ER) and dielectric barrier discharge plasma reaction (DBDPR), respectively. The phenol removal rate was shown as $1^{st}$ order both in ER and DBDPR. Also, the absorbance of $UV_{254}$ matters which means aromatic intermediates was analyzed to investigate the complete phenol degradation process. In ER, the phenol degradation and aromatic intermediates production rates increased by the increase of NaCl concentration. However, in DBDPR, the variation of NaCl concentration had no effect on the degradation of phenol and $UV_{254}$ matters. Air flow rate had a little effect on the removal of phenol and the variation of $UV_{254}$ matters in ER. The phenol removal rate in ER was a little higher than that in DBDPR. The produced $H_2O_2$ and $O_3$ amounts in ER were 2 times and 10 times higher than those in DBDPR. The chlorine intermediates ($ClO_2$ and free chlorine) were produced in ER, however, they were not produced in DBDPR.

• Journal of Nutrition and Health
• /
• v.32 no.6
• /
• pp.637-643
• /
• 1999

The effects of yam(Dioscorea) on lowering cholesterol level and its mechanism were investigated. The concentrations of plasma and liver lipids, and the excretions of fecal neutral sterol and bile acid were measured in male Sprague-Dawley rats. Five Groups of 8 rats were fed hypercholesterolemic diet(1% cholesterol, 10% lard ; control), hypercholesterolemic diet plus 15% or 30% dried yam powder prepared by either hot-air(15HY, 30HY) or freeze dry(15FY, 30FY) for 4wk. Plasma total lipid, total cholesterol and cholesterol level was also significantly lower(28%, p<0.05), buy HMG-CoA reductase activity was higher in 30FY(230%, p<0.05) than in control. Although no significant differences in fecal neutral sterols were observed among groups, the yam-fed rats apparently had less bacterial degradation of cholesterol as indicated by a significantly greater of fecal cholesterol to coprostanol than in controls. Total fecal bile acids were significantly greater in rats fed yam(15HY : 5 folds, 15FY ; 12,30HY ; 12, 20FY ; 22) than in controls. The ratio of secondary to primary bile acids was almost 8 times lower in 30FY than in control. These data indicate that yam lowers cholesterol both in plasma and in liver through increasing fecal bile acid excretion as well as HMG-CoA reductase activity. Freeze-dried yam, which possesses viscosity, was more effective in cholesterol-lowering action than hot-air dried one.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1127-1130
• /
• 2003

In the last several centuries, humankind have been experienced the material abundance with a development of technical civilization and being industrialized quickly. During the process of this, environmental pollutant have occurred naturally so that humankind have more interests for environment pollutant. Air pollution caused by exhaust from a car is very harmful for human. Most of exhaust from a gasoline engine are $CO_x(CO+CO_2),\;NO_x(NO+NO_2)$, and THC(Total Hydrocarbon). The method to remove these kinds of noxious gases are so many thing such as the three catalysts, $NO_x$ catalysts, Filter and so on. However, although air pollution caused by exhaust from motorcycle have also occurred very much, there is no regulation for motorcycle. In this paper, we studied to remove $CO_x(CO+CO_2),\;NO_x(NO+NO_2)$, THC exhaust from a motorcycle using non-thermal plasma In the result, $NO_x(NO+NO_2)$ concentration was decreased approximately 70% and THC(Total Hydrocarbon) was removed about 40%.

• Korean Journal of Materials Research
• /
• v.17 no.3
• /
• pp.132-136
• /
• 2007

Oxidation resistance of sintered ${\beta}-FeSi_{2}$ was investigated at intermediate temperature range in air atmosphere. Fully dense and porous bodies of ${\beta}-FeSi_{2}$ samples were fabricated by using the Spark Plasma Sintering (SPS). They were annealed at $900^{\circ}C$ for 5days to obtain ${\beta}-FeSi_{2}$ phase. The bulk samples were oxidized at $800,\;900\;and\;950^{\circ}C$ in air atmosphere. The high temperature oxidation tests reveal that amorphous $SiO_{2}$ layer, similar to Si was formed and grew parabolically on ${\beta}-FeSi_{2}$. Accelerated oxidation is not observed as well as cracks and grain boundary oxidation. Granular ${\varepsilon}-FeSi$ was developed below the oxide layer as a result of oxidation of ${\beta}-FeSi_{2}$. Oxidation resistance of sintered ${\beta}-FeSi_{2}$ was excellent for high-temperature thermoelectric application.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.1
• /
• pp.25-31
• /
• 2004

The heat transfer characteristics of a plasma display panel has been investigated for cooling an electronic module. Hence, a two dimensional $\kappa-{\varepsilon}$ turbulent model was developed to predict the temperatures of the panel and module. The heat conduction was solve for the material region. To consider the mixed convection at the solid-fluid interfaces between the air and the panel and module, the energy equation was solved simultaneously. When the electronic module stands face to face with the panel, the temperatures of panel and module are lower than other arrangement due to the chimney effect. However the gap between the panel and module does not affect significantly the maximum temperature when the aspect ratio is less than 0.1. To maintain the maximum temperature of the module under a certain limit, the passage of air should be well designed by the optimal layout of electronic modules which have different heat emission.

• Journal of the Korean Institute of Gas
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2014

In this study, plasma reformer technology with a LPG injector was investigated. It was developed with injection of LPG fuel and air in a region where the plasma discharge to make the thermal decomposition carbon fuel and to generate additional hydrogen. As a result of reforming test, when power is 70~100W supply, about HC 0.7% of the full reformed gas and hydrogen was generated from 1.2 to 1.5 %.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.3
• /
• pp.105-112
• /
• 2002

A combined process of non-thermal plasma and catalytic techniques has been investigated to treat toxic gas compounds in air. The treated gas in the present study is $CH_3$CN that has been known to be a simulant of toxic chemical agent. A planar type dielectric barrier discharge(DBD) reactor has been used to generate non-thermal plasma that produces various chemically active species, O, N, OH, $O_3$, ion, electrons, etc. Several different types of adsorbents and catalysts, which are MS 5A, MS 13X, Pt/alumina, are packed into the plasma reactor, and have been tested to save power consumption and to treat by-products. Various aspects of the present techniques, which are decomposition efficiencies along with the power consumption, by-product analysis, reaction pathways modified by the adsorbents and catalysts, have been discussed in the present study.

• Korean Journal of Environmental Biology
• /
• v.21 no.4
• /
• pp.352-357
• /
• 2003

Phenanthrene, one of Polycyclic aromatic hydrocarbons with three aromatic rings, is a ubiquitous contaminant in the environment. Phenanthrene has been identified in ambient air, drinking water and sediment. We examined the effect of phenanthrene on steroid hormones level of olive flounder, Paralichthys olivaceus. Plasma testosterone level was increased significantly in fish exposed to phenanthrene($\geq1.0 \mu M$) at 4th week. However, there was no significant changes of estradiol-17$\beta$ concentration in fish exposed to phenanthrene. The physiological variation in phenanthrene exposed fish was a dramatic increase in plasma cortisol level. It is concluded that chronic exposure of phenanthrene can induce increase of plasma testosterone levels and elevate the plasma cortisol level in flounder, Paralichthys olivaceus.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.3
• /
• pp.111-114
• /
• 2002

Using the plasma that we developed to generate a low-temperature plasma at atmospheric pressure, we have investigated the etching possibility of an air-exposed zinc oxide(ZnO) thin films. Hydrogen and methane radicals generated from the plasma were observed and their intensity was found to be dependent on the isomer of butyl acetate by an analysis with optical emission spectrosxopy. The etching ability of this plasma was evaluated by an emission intensity, etching time, rf power.