• 대한기계학회논문집B
• /
• 제36권7호
• /
• pp.767-774
• /
• 2012

신형경수로인 APR1400의 안전주입탱크에는 유량조절장치가 설치되어있다. 이러한 유량조절장치는 안전주입탱크 내부의 수위에 따라 유량조절장치 내부에 위치한 와류실의 유동양식이 변하도록 설계되어 있어, 피동적으로 유량이 조절되는 특성을 가지고 있다. 그러나 고유량에서 저유량으로 전환되는 과정에서 유동의 관성에 의해 상부 기체가 방출되는 현상이 존재하여, FD 성능에 영향을 줄 수 있다. 본 논문에서는 전산유체역학 코드인 CFX 코드를 활용하여 안전주입탱크의 유량전환현상시 기체의 방출현상에 대해 이상유체 자유수면모델 적용하여 계산하였다. 이를 통해 안전주입수의 수위 및 상부 충전기체의 거동을 평가하여 FD 성능특성에 미치는 영향을 분석하였다. 그 결과, 유량전환구간에서 자유수면의 높이가 순간적으로 낮아지게 되어, 상부의 기체가 일부 방출되는 것으로 평가되었으나, FD 성능특성에는 큰 영향을 미치지 않는 것으로 평가되었다.

• 대한기계학회논문집B
• /
• 제35권4호
• /
• pp.337-344
• /
• 2011

고분자 전해질막 연료전지에서 공급 기체의 가습은 연료전지의 효율과 수명 향상 측면에서 필수적이다. 기존의 고분자 전해질막 연료전지의 가습 방법으로 물 분사나 막가습기, 엔탈피 휠 등이 사용되었다. 하지만, 이러한 외부 가습 방법은 시스템 부피를 크게 하고 고출력 구간에서 가습량이 부족한 단점이 있다. 가습 장치의 효율과 전체 연료전지 시스템 효율을 높이려면, 연료전지의 고온다습한 배출기체로부터 열과 수분을 회수할 필요가 있다. 본 연구에서는 연료전지의 고온다습한 배출공기를 재순환하여 공급공기를 1 차로 가습하고 소형의 막가습기로 2 차 가습하는 복합가습에 대한 해석적 연구를 수행하였다. 그리고 최적의 가습 시스템 설계를 위한 새로운 방법을 제안하였다.

• 한방안이비인후피부과학회지
• /
• 제7권1호
• /
• pp.53-84
• /
• 1994

The study has been carried out to investigate of the Allergic Rhinitis by referring to 87 literatures. The results were as follows; 1. In oriental medical science, Allergic Rhinitis is belong to the category of the 'BiGu'(鼻구) 'GuChe'(구체). The 'Gu'(구) of the BiGu means watery rhinorrhea, the 'Che'(체) of the GuChe means sneezing. 2. The cause of a disease summarize the weak of Lung, Spleen and Kidney, and invasion into the nasal cavity of PoongHan etc a wrong air. Sometimes the pathologial change appear PoongHan changeHwa(風寒化火), HwaYeol is hidden in the inside(火熱內伏). The contributing factors are found a season(spring, winter), an abnormal weather(運氣 : 少陰 少陽 陽明 司天, 歲金不及), an emotional stress, an external wound of the harmful air, a food allergens and fatigue, a contact of substances, a sunlight etc. 3. Predominant symptoms are watery rhinorrhea, sneezing and nasal obstruction. Sometimes accompanic symptoms are nasal bleeding, mucopurulent rhinorrhea, olfactory disturbance, nasal polyp, rhinolalia clausa, respiratory disfunction etc. 4. The treatment-methodes is as follows, OnBoPaeJang GeoPoongSanHan(溫補肺臟 祛風散寒), GeonBilkGi(健脾益氣), BoSinNabGi (補腎納氣). The treatmentherbs is as follows, OnBoJiLuDan GaGam(溫補止流丹 加減), OkByeongPoongSan plus ChangIJaSan GaGam(玉屛風散合 蒼耳子散 加減), BoJungIkGiTang GaGam plus SoCheongLyongTang(補中益氣湯加減 配合 小靑龍湯), SinGiHwan GaGam(腎氣丸加減), GaeJiTang(桂枝湯) etc. 5. The external treatment is as follows, JeokBi(滴鼻), ChuiBi(吹鼻), SaekBi(塞鼻), stick and herbs-injection on the acupuncture-point, pressure ear acupuncture-point, herbs-pillow etc. 6. The acupuncture-moxa treatment is as follows, the methodes of cure apply TongJoGyeongGi(通調經氣), SanTongBiGui(宣通鼻竅) etc. Predominent acupuncture-points are YoungHyang(迎香), InDang(印堂), BiTong(鼻通), SangSeong(上星), HabGok(合谷) and so on. As mentioned above, from now on, it's need to the oriental medical scientific study of the Immunity and Allergy and to the external treatment's application for the ascent of the treatment-effect of the allergic disease.

• 한국전산유체공학회지
• /
• 제21권3호
• /
• pp.15-23
• /
• 2016

In the present study, two phase flows around a projectile vertically launched from an underwater platform have been numerically investigated by using a three dimensional multi-phase RANS flow solver based on pseudo-compressibility and a homogeneous mixture model on unstructured meshes. The relative motion between the platform and projectile was described by six degrees of freedom equations of motion with Euler angles and a chimera technique. The propulsive power of the projectile was modeled as the fluid force acting on the lower surface of the body by the compressed air emitted from the underwater platform. Various flow conditions were considered to analyze the fluid-dynamics motion parameters of the projectile. The water level of platform and the current speed around the projectile were the main parametric variables. The numerical calculations were conducted up to 0.75sec in physical time scale. The dynamics tendency of the projectile was almost identical with respect to the water level variation due to the constant buoyancy term. The moving speed of the projectile along the vertical axis inside the platform decreased when the current speed increased. This is because the inflow from outside of the platform impeded development of the compressed air emitted from the floor surface of the launch platform. As a result, the fluid force acting on the lower surface of the projectile decreased, and injection time of the projectile from the platform was delayed.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권1호
• /
• pp.54-60
• /
• 2006

In this paper, we describe a bio-fluidic device for adaptive sample pretreatment, in order to optimize the conditions under which absorbance assays can be conducted. This device can be successfully applied to the measurement of Escherichia coli (E. coli) concentrations using adaptive dilution, with which the dilution ratio can be adjusted during the dilution. Although many attempts have been previously made to miniaturize complex biochemical analyses at the chip scale, very few sample pretreatment processes have actually been miniaturized or automated at this point. Due to the lack of currently available on-chip pretreatments, analytical instruments tend to suffer from a limited range of analysis. This occasionally hinders the direct and quantitative analysis of specific analyses obtained from real samples. In order to overcome these issues, we exploit two novel strategies: dilution with a programmable ratio, and to-and-fro mixing. The bio-fluidic device consists of a rectangular chamber constructed of poly(dimethylsiloxane) (PDMS). This chamber has four openings, an inlet, an outlet, an air control, and an air vent. Each of the dilution cycles is comprised of four steps: detection, liquid drain, buffer injection, and to-and-fro mixing. When using adaptive sample pretreatment, the range in which E. coli concentrations can be measured is broadened, to an optical density (O.D.) range of $0.3{\sim}30$. This device may prove useful in the on-line monitoring of cell concentrations, in both fermenter and aqueous environments.

• Korean Chemical Engineering Research
• /
• 제55권6호
• /
• pp.846-853
• /
• 2017

순환유동층 모사장치와 $30kW_{th}$급 파일럿 연소기를 활용하여 슬러지 순산소 유동층 연소특성을 살펴보았다. 순환유동층 모사실험에서 최소유동화속도($U_{mf}$)는 0.120 m/s로 계산되었고, 고속유동화를 위한 공탑속도는 2.5 m/s 이상으로 결정되었다. 파일럿 연소실험에서는 일반공기 및 21~40% 순산소 연소실험이 수행되었다. 배출가스 온도의 경우 21~25% 순산소 연소가 일반공기 및 30% 이상의 순산소 연소보다 상대적으로 높았다. 또한, 배출가스 중 $CO_2$ 배출농도가 21~25% 순산소 연소 범위에서 80% 이상으로 나타났다. 이를 고려한 전반적인 연소특성을 살펴 보았을 때 25% 순산소 연소가 본 슬러지 연료 연소에 대한 장시간 운전에 있어 보다 적합한 것으로 사료된다.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권8호
• /
• pp.830-835
• /
• 1997

In this study an experimental investigation has been conducted to remove NOx and SO$_2$simultaneously from a combustion flue gases were consisted of NO-SO$_2$-$CO_2$-$N_2$-O$_2$([NO]o:200ppm and [SO$_2$]o:800ppm) and the injection gases used as radical source gases were NH$_3$-Ar-air and CH$_4$-Ar-air. NOx and SO$_2$removal efficiency and the other by-products were measured by Fourier Transform Infrared(FTIR) as well as SO$_2$, NOx and NO$_2$gas detectors. and SEM images after sampling. The results showed that a significant Nucleating Particle Counter(CNPC) and SEM images after sampling. The results showed that a significant aerosol particle formation was observed during a simultaneous NOx and SO$_2$removal operation in corona radical shower systems. The diameter of aerosol particles was in the range of 0.18 to 3.6${\mu}{\textrm}{m}$ with a maximum fraction of particles at particles diameter of 1${\mu}{\textrm}{m}$. The NOx removal efficiency significantly increased with increasing applied voltage and NH$_3$molecule ratio. The SO$_2$removal efficiency was not significantly effected by applied voltage and slightly increased with increasing NH$_3$molecule ratio. It could be found that it is possible to use CH$_4$for NOx and SO$_2$removal by corona radical shower systems.

• 설비공학논문집
• /
• 제11권1호
• /
• pp.61-72
• /
• 1999

The present study experimentally investigated the effect of refrigeration lubricant on the heat transfer performance in the straight sections and U-bend of a microfin tube evaporator by using R-22/mineral oil and R-407C/POE oil. The apparatus consisted of test section with U-bend, preheater, condenser, oil injection and sampling devices, magnetic pump, mass flow meter etc. The experimental parameters were oil concentration of 0 to 5 wt%, inlet quality of 0.1 to 0.5, mass flux of 219 and $400kg/m^2s$ and heat flux of 10 and $20kW/m^2$. The effects of parameters on the heat transfer coefficients were large in the order of inlet quality, mass flux and heat flux as oil concentration got increased. As oil concentration was increased, heat transfer coefficients were continuously decreased for R-22 and increased by 3% up to the concentration of 1% and then decreased for R-407C under the condition of large inlet quality, and small mass flux and heat flux. But, the heat transfer coefficients were increased up to the concentration of 3% and then decreased for both R-22 and R-407C refrigerants under the opposite conditions. The variation of enhancement factors for R-407C was under 50% of that for R-22 and the variation with respect to the positions in the test section was small. The pressure drops were increased for both R-22 and R-407C refrigerants as oil concentration was increased. The pressure drops for R-407C were smaller by the maximum of 18% than those for R-22.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2652-2659
• /
• 2020

The methyl iodide (CH₃I) removal performance of tri-ethylene-di-amine impregnated activated carbon (TEDA-AC) used in the air cleaning unit of nuclear power plants (NPPs) should be maintained at least 99% between 24 month-performance test period. In order for evaluating the effectiveness of TEDA-AC on the removal performance of CH₃I in nuclear power plant during the operation of NPPs, the long-term test for up to 15 months was carried out under the simulated operating conditions (e.g., 25 ℃, RH 50%, ppb level poisoning gases injection) at nuclear power plants (NPPs). The TEDA-AC samples were analyzed with the Brunauer-Emmett-Teller (BET) specific surface area and TEDA content as well as CH₃I penetration test. It is clearly evident that more than 99% of CH₃I removal performance of TEDA-AC was observed in the TEDA-AC samples during 15 months of long-term operation under the simulated NPP operating conditions including the ppb level of organic and oxide form of poisoning gases. BET specific surface area and TEDA content that can affect the CH₃I removal performance of TEDA-AC were also maintained as those in new TEDA-AC during 15 months of long-term operation.

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.38-45
• /
• 2004

This paper studies the effects of intake port configuration on the swirl that is key parameter in the flow field of direct injection diesel engines. In-cylinder flow characteristics is known to have significant effects on fuel air mixing, combustion and emissions. To investigate the swirl flow generated by various intake ports, steady state flow tests were conducted to evaluate the swirl. Helical port geometry, SCV shape and bypass were selected as the design parameters to increase the swirl flow and parametric study was performed to choose the optimal port shape that would generate a high swirl ratio efficiently. The results revealed that a key factor in generating a high swirl ratio was to suitably control the direction of the intake air flow passing through the valve seat. For these purposes, we changed the distance of helical and tangential port as well as installed bypass near the valve seat and the effects of intake port geometry on in-cylinder flow field were visualized by a laser sheet visualization method. From the experimental results, we found that the swirl ratio and mass flow rate had a trade off relation. In addition, the result indicates that the bypass is a effective method to increase the swirl ratio without sacrificing mass flow rate.